mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Willy Tarreau <willy@haproxy.com>,
	Ksenija Stanojevic <ksenija.stanojevic@gmail.com>,
	Arnd Bergmann <arnd@arndb.de>
Cc: linux-kernel@vger.kernel.org, Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH 10/13] auxdisplay: charlcd: Add support for 4-bit interfaces
Date: Mon,  6 Feb 2017 15:38:12 +0100	[thread overview]
Message-ID: <1486391895-9554-11-git-send-email-geert@linux-m68k.org> (raw)
In-Reply-To: <1486391895-9554-1-git-send-email-geert@linux-m68k.org>

In 4-bit mode, 8-bit commands and data are written using two raw writes
to the data interface: high nibble first, low nibble last.  This must be
handled by the low-level driver.

However, as we don't know in which mode (4-bit or 8-bit) nor 4-bit phase
the LCD was left, initialization must always be handled using raw
writes, and needs to configure the LCD for 8-bit mode first.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/auxdisplay/charlcd.c | 36 ++++++++++++++++++++++++++++++------
 include/misc/charlcd.h       |  2 ++
 2 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c
index 8d45410056357880..6d27d9363c9baaf2 100644
--- a/drivers/auxdisplay/charlcd.c
+++ b/drivers/auxdisplay/charlcd.c
@@ -223,24 +223,46 @@ static void charlcd_clear_display(struct charlcd *lcd)
 
 static int charlcd_init_display(struct charlcd *lcd)
 {
+	void (*write_cmd_raw)(struct charlcd *lcd, int cmd);
 	struct charlcd_priv *priv = to_priv(lcd);
+	u8 init;
+
+	if (lcd->ifwidth != 4 && lcd->ifwidth != 8)
+		return -EINVAL;
 
 	priv->flags = ((lcd->height > 1) ? LCD_FLAG_N : 0) | LCD_FLAG_D |
 		      LCD_FLAG_C | LCD_FLAG_B;
 
 	long_sleep(20);		/* wait 20 ms after power-up for the paranoid */
 
-	/* 8bits, 1 line, small fonts; let's do it 3 times */
-	lcd->ops->write_cmd(lcd, LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS);
+	/*
+	 * 8-bit mode, 1 line, small fonts; let's do it 3 times, to make sure
+	 * the LCD is in 8-bit mode afterwards
+	 */
+	init = LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS;
+	if (lcd->ifwidth == 4) {
+		init >>= 4;
+		write_cmd_raw = lcd->ops->write_cmd_raw4;
+	} else {
+		write_cmd_raw = lcd->ops->write_cmd;
+	}
+	write_cmd_raw(lcd, init);
 	long_sleep(10);
-	lcd->ops->write_cmd(lcd, LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS);
+	write_cmd_raw(lcd, init);
 	long_sleep(10);
-	lcd->ops->write_cmd(lcd, LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS);
+	write_cmd_raw(lcd, init);
 	long_sleep(10);
 
+	if (lcd->ifwidth == 4) {
+		/* Switch to 4-bit mode, 1 line, small fonts */
+		lcd->ops->write_cmd_raw4(lcd, LCD_CMD_FUNCTION_SET >> 4);
+		long_sleep(10);
+	}
+
 	/* set font height and lines number */
 	lcd->ops->write_cmd(lcd,
-		LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS |
+		LCD_CMD_FUNCTION_SET |
+		((lcd->ifwidth == 8) ? LCD_CMD_DATA_LEN_8BITS : 0) |
 		((priv->flags & LCD_FLAG_F) ? LCD_CMD_FONT_5X10_DOTS : 0) |
 		((priv->flags & LCD_FLAG_N) ? LCD_CMD_TWO_LINES : 0));
 	long_sleep(10);
@@ -482,7 +504,8 @@ static inline int handle_lcd_special_code(struct charlcd *lcd)
 	/* check whether one of F,N flags was changed */
 	else if ((oldflags ^ priv->flags) & (LCD_FLAG_F | LCD_FLAG_N))
 		lcd->ops->write_cmd(lcd,
-			LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS |
+			LCD_CMD_FUNCTION_SET |
+			((lcd->ifwidth == 8) ? LCD_CMD_DATA_LEN_8BITS : 0) |
 			((priv->flags & LCD_FLAG_F) ? LCD_CMD_FONT_5X10_DOTS : 0) |
 			((priv->flags & LCD_FLAG_N) ? LCD_CMD_TWO_LINES : 0));
 	/* check whether L flag was changed */
@@ -716,6 +739,7 @@ struct charlcd *charlcd_alloc(unsigned int drvdata_size)
 	priv->esc_seq.len = -1;
 
 	lcd = &priv->lcd;
+	lcd->ifwidth = 8;
 	lcd->bwidth = DEFAULT_LCD_BWIDTH;
 	lcd->hwidth = DEFAULT_LCD_HWIDTH;
 	lcd->drvdata = priv->drvdata;
diff --git a/include/misc/charlcd.h b/include/misc/charlcd.h
index c40047b673c9ea09..23f61850f3639ae1 100644
--- a/include/misc/charlcd.h
+++ b/include/misc/charlcd.h
@@ -14,6 +14,7 @@ struct charlcd {
 	const struct charlcd_ops *ops;
 	const unsigned char *char_conv;	/* Optional */
 
+	int ifwidth;			/* 4-bit or 8-bit (default) */
 	int height;
 	int width;
 	int bwidth;			/* Default set by charlcd_alloc() */
@@ -28,6 +29,7 @@ struct charlcd_ops {
 	void (*write_data)(struct charlcd *lcd, int data);
 
 	/* Optional */
+	void (*write_cmd_raw4)(struct charlcd *lcd, int cmd);	/* 4-bit only */
 	void (*clear_fast)(struct charlcd *lcd);
 	void (*backlight)(struct charlcd *lcd, int on);
 };
-- 
1.9.1

  parent reply	other threads:[~2017-02-06 14:38 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-06 14:38 [PATCH 00/13] Add HD44780 Character LCD support Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 01/13] misc: panel: Fix LCD_FLAG_F/LCD_FLAG_N exchange Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 02/13] misc: panel: Remove PANEL_VERSION Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 03/13] misc: panel: Remove unused LCD_FLAG_S and LCD_FLAG_ID Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 04/13] misc: panel: Remove reference to misc device support Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 05/13] misc: panel: Move all suboptions into a big if section Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 06/13] misc: panel: Remove always-true check from panel_detach() Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 07/13] misc: panel: Add lcd_home() helper Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 08/13] misc: panel: Abstract temporary backlight handling Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 09/13] auxdisplay: charlcd: Extract character LCD core from misc/panel Geert Uytterhoeven
2017-02-06 15:09   ` Arnd Bergmann
2017-02-06 15:18     ` Geert Uytterhoeven
2017-02-08 12:22   ` Geert Uytterhoeven
2017-02-06 14:38 ` Geert Uytterhoeven [this message]
2017-02-06 14:38 ` [PATCH 11/13] auxdisplay: charlcd: Add support for displays with more than two lines Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 12/13] dt-bindings: auxdisplay: Add bindings for Hitachi HD44780 Geert Uytterhoeven
2017-02-09  1:11   ` Rob Herring
2017-02-09  8:51     ` Geert Uytterhoeven
2017-02-06 14:38 ` [PATCH 13/13] auxdisplay: Add HD44780 Character LCD support Geert Uytterhoeven
2017-02-07 11:23   ` Andy Shevchenko
2017-02-08 13:18     ` Geert Uytterhoeven
2017-02-08 13:38       ` Andy Shevchenko
2017-02-08 13:41         ` Geert Uytterhoeven
2017-02-08 16:27           ` Andy Shevchenko
2017-02-08 17:19             ` Geert Uytterhoeven
2017-02-06 15:09 ` [PATCH 00/13] " Willy TARREAU
2017-02-10 14:37 ` Greg Kroah-Hartman
2017-03-16 20:50 ` Linus Walleij
2017-03-17  7:40   ` Geert Uytterhoeven
2017-03-23 17:15 ` Willy TARREAU
2017-03-23 17:37   ` Willy TARREAU
2017-03-23 18:49     ` Geert Uytterhoeven
2017-03-23 19:03       ` Willy TARREAU
2017-03-23 20:29         ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486391895-9554-11-git-send-email-geert@linux-m68k.org \
    --to=geert@linux-m68k.org \
    --cc=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=ksenija.stanojevic@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miguel.ojeda.sandonis@gmail.com \
    --cc=willy@haproxy.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®