From: Mars Cheng <mars.cheng@mediatek.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: CC Hwang <cc.hwang@mediatek.com>,
Loda Chou <loda.chou@mediatek.com>,
Miles Chen <miles.chen@mediatek.com>,
Jades Shih <jades.shih@mediatek.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
My Chuang <my.chuang@mediatek.com>,
<linux-kernel@vger.kernel.org>, <wsd_upstream@mediatek.com>,
Mars Cheng <mars.cheng@mediatek.com>
Subject: [PATCH] sysctl: remove unnecessasy whiltspaces
Date: Mon, 13 Feb 2017 10:20:53 +0800 [thread overview]
Message-ID: <1486952453-10119-1-git-send-email-mars.cheng@mediatek.com> (raw)
some sizeof() in sysctl.c have unnecessary space before '(',
remove them. Also remove some trailing whitspaces.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
---
kernel/sysctl.c | 60 +++++++++++++++++++++++++++----------------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8dbaec0..2d86ffb 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -543,14 +543,14 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "stop-a",
.data = &stop_a_enabled,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "scons-poweroff",
.data = &scons_pwroff,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -559,7 +559,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "tsb-ratio",
.data = &sysctl_tsb_ratio,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -568,7 +568,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "soft-power",
.data = &pwrsw_enabled,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -577,7 +577,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "unaligned-trap",
.data = &unaligned_enabled,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -674,7 +674,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "sg-big-buff",
.data = &sg_big_buff,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
@@ -692,7 +692,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "sysrq",
.data = &__sysrq_enabled,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = sysrq_sysctl_handler,
},
@@ -701,7 +701,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "cad_pid",
.data = NULL,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0600,
.proc_handler = proc_do_cad_pid,
},
@@ -762,7 +762,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "pid_max",
.data = &pid_max,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &pid_max_min,
@@ -835,7 +835,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "ngroups_max",
.data = &ngroups_max,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
@@ -850,7 +850,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "watchdog",
.data = &watchdog_user_enabled,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_watchdog,
.extra1 = &zero,
@@ -868,7 +868,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "nmi_watchdog",
.data = &nmi_watchdog_enabled,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_nmi_watchdog,
.extra1 = &zero,
@@ -881,7 +881,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "soft_watchdog",
.data = &soft_watchdog_enabled,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_soft_watchdog,
.extra1 = &zero,
@@ -939,7 +939,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "unknown_nmi_panic",
.data = &unknown_nmi_panic,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -971,14 +971,14 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "bootloader_type",
.data = &bootloader_type,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
{
.procname = "bootloader_version",
.data = &bootloader_version,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
@@ -1003,7 +1003,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "spin_retry",
.data = &spin_retry,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -1012,7 +1012,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "acpi_video_flags",
.data = &acpi_realmode_flags,
- .maxlen = sizeof (unsigned long),
+ .maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
},
@@ -1021,7 +1021,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "ignore-unaligned-usertrap",
.data = &no_unaligned_warning,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -1030,7 +1030,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
{
.procname = "unaligned-dump-stack",
.data = &unaligned_dump_stack,
- .maxlen = sizeof (int),
+ .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
@@ -1251,7 +1251,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
.proc_handler = overcommit_kbytes_handler,
},
{
- .procname = "page-cluster",
+ .procname = "page-cluster",
.data = &page_cluster,
.maxlen = sizeof(int),
.mode = 0644,
@@ -1750,7 +1750,7 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
.mode = 0555,
.child = inotify_table,
},
-#endif
+#endif
#ifdef CONFIG_EPOLL
{
.procname = "epoll",
@@ -2152,12 +2152,12 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
int *i, vleft, first = 1, err = 0;
size_t left;
char *kbuf = NULL, *p;
-
+
if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) {
*lenp = 0;
return 0;
}
-
+
i = (int *) tbl_data;
vleft = table->maxlen / sizeof(*i);
left = *lenp;
@@ -2252,7 +2252,7 @@ static int do_proc_dointvec(struct ctl_table *table, int write,
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
- * values from/to the user buffer, treated as an ASCII string.
+ * values from/to the user buffer, treated as an ASCII string.
*
* Returns 0 on success.
*/
@@ -2644,7 +2644,7 @@ static int do_proc_dointvec_ms_jiffies_conv(bool *negp, unsigned long *lvalp,
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
- * values from/to the user buffer, treated as an ASCII string.
+ * values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in seconds, and are converted into
* jiffies.
*
@@ -2666,8 +2666,8 @@ int proc_dointvec_jiffies(struct ctl_table *table, int write,
* @ppos: pointer to the file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
- * values from/to the user buffer, treated as an ASCII string.
- * The values read are assumed to be in 1/USER_HZ seconds, and
+ * values from/to the user buffer, treated as an ASCII string.
+ * The values read are assumed to be in 1/USER_HZ seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
@@ -2689,8 +2689,8 @@ int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
* @ppos: the current position in the file
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
- * values from/to the user buffer, treated as an ASCII string.
- * The values read are assumed to be in 1/1000 seconds, and
+ * values from/to the user buffer, treated as an ASCII string.
+ * The values read are assumed to be in 1/1000 seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
--
1.7.9.5
reply other threads:[~2017-02-13 2:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486952453-10119-1-git-send-email-mars.cheng@mediatek.com \
--to=mars.cheng@mediatek.com \
--cc=akpm@linux-foundation.org \
--cc=cc.hwang@mediatek.com \
--cc=jades.shih@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=loda.chou@mediatek.com \
--cc=miles.chen@mediatek.com \
--cc=my.chuang@mediatek.com \
--cc=wsd_upstream@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®