mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andy Yan <andy.yan@rock-chips.com>
To: heiko@sntech.de, robh+dt@kernel.or
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Andy Yan <andy.yan@rock-chips.com>
Subject: [PATCH 6/7] ARM: dts: rename RK1108 to RV1108
Date: Mon, 13 Feb 2017 19:09:50 +0800	[thread overview]
Message-ID: <1486984190-32628-1-git-send-email-andy.yan@rock-chips.com> (raw)
In-Reply-To: <1486983566-32265-1-git-send-email-andy.yan@rock-chips.com>

Rockchip finally named the SOC as RV1108, so change it
for compatible.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

 arch/arm/boot/dts/{rk1108.dtsi => rv1108.dtsi} | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
 rename arch/arm/boot/dts/{rk1108.dtsi => rv1108.dtsi} (94%)

diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
similarity index 94%
rename from arch/arm/boot/dts/rk1108.dtsi
rename to arch/arm/boot/dts/rv1108.dtsi
index d770023..f363960 100644
--- a/arch/arm/boot/dts/rk1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -41,13 +41,13 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/rk1108-cru.h>
+#include <dt-bindings/clock/rv1108-cru.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	compatible = "rockchip,rk1108";
+	compatible = "rockchip,rv1108";
 
 	interrupt-parent = <&gic>;
 
@@ -113,7 +113,7 @@
 	};
 
 	uart2: serial@10210000 {
-		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
 		reg = <0x10210000 0x100>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
@@ -127,7 +127,7 @@
 	};
 
 	uart1: serial@10220000 {
-		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
 		reg = <0x10220000 0x100>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
@@ -141,7 +141,7 @@
 	};
 
 	uart0: serial@10230000 {
-		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
 		reg = <0x10230000 0x100>;
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
@@ -155,17 +155,17 @@
 	};
 
 	grf: syscon@10300000 {
-		compatible = "rockchip,rk1108-grf", "syscon";
+		compatible = "rockchip,rv1108-grf", "syscon";
 		reg = <0x10300000 0x1000>;
 	};
 
 	pmugrf: syscon@20060000 {
-		compatible = "rockchip,rk1108-pmugrf", "syscon";
+		compatible = "rockchip,rv1108-pmugrf", "syscon";
 		reg = <0x20060000 0x1000>;
 	};
 
 	cru: clock-controller@20200000 {
-		compatible = "rockchip,rk1108-cru";
+		compatible = "rockchip,rv1108-cru";
 		reg = <0x20200000 0x1000>;
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
@@ -173,7 +173,7 @@
 	};
 
 	emmc: dwmmc@30110000 {
-		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
@@ -185,7 +185,7 @@
 	};
 
 	sdio: dwmmc@30120000 {
-		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
@@ -197,7 +197,7 @@
 	};
 
 	sdmmc: dwmmc@30130000 {
-		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		clock-freq-min-max = <400000 100000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
@@ -222,7 +222,7 @@
 	};
 
 	pinctrl: pinctrl {
-		compatible = "rockchip,rk1108-pinctrl";
+		compatible = "rockchip,rv1108-pinctrl";
 		rockchip,grf = <&grf>;
 		rockchip,pmu = <&pmugrf>;
 		#address-cells = <1>;
-- 
2.7.4

  parent reply	other threads:[~2017-02-13 11:10 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1486983566-32265-1-git-send-email-andy.yan@rock-chips.com>
2017-02-13 11:02 ` [PATCH 1/7] dt-bindings: rockchip-dw-mshc: " Andy Yan
2017-02-14  8:51   ` Ulf Hansson
2017-02-21 23:36   ` Rob Herring
2017-02-22  1:51     ` Heiko Stuebner
2017-02-23 14:59   ` Heiko Stuebner
2017-03-14 16:20   ` Ulf Hansson
2017-02-13 11:04 ` [PATCH 2/7] dt-bindings: rk1108-cru: " Andy Yan
2017-02-22 20:47   ` Rob Herring
2017-02-13 11:04 ` [PATCH 3/7] clk: rockchip: " Andy Yan
2017-02-13 11:06 ` [PATCH 4/7] dt-bindings: rockchip,pinctrl: " Andy Yan
2017-02-22 15:08   ` Rob Herring
2017-02-22 18:33   ` Heiko Stuebner
2017-03-14 13:26   ` Linus Walleij
2017-02-13 11:07 ` [PATCH 5/7] pinctrl: rockchip: " Andy Yan
2017-02-22 18:34   ` Heiko Stuebner
2017-02-13 11:09 ` Andy Yan [this message]
2017-02-13 11:10 ` [PATCH 7/7] ARM: rockchip: reanme " Andy Yan
2017-02-22 15:10   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486984190-32628-1-git-send-email-andy.yan@rock-chips.com \
    --to=andy.yan@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.or \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®