From: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
mpe@ellerman.id.au
Cc: benh@kernel.crashing.org, paulus@samba.org,
lsorense@csclub.uwaterloo.ca, oohall@gmail.com,
naveen.n.rao@linux.vnet.ibm.com, ast@kernel.org,
chris@distroguy.com, aneesh.kumar@linux.vnet.ibm.com,
bsingharora@gmail.com, anton@samba.org,
paul.gortmaker@windriver.com, bauerman@linux.vnet.ibm.com,
viro@zeniv.linux.org.uk, christophe.leroy@c-s.fr, duwe@lst.de,
oss@buserror.net,
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Subject: [PATCH v2 1/2] powerpc: Emulation support for load/store instructions on LE
Date: Tue, 14 Feb 2017 13:32:11 +0530 [thread overview]
Message-ID: <1487059332-6925-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com> (raw)
In-Reply-To: <1487059332-6925-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com>
emulate_step() uses a number of underlying kernel functions that were
initially not enabled for LE. This has been rectified since. So, fix
emulate_step() for LE for the corresponding instructions.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
---
arch/powerpc/lib/sstep.c | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 06c7e9b..e14a2fb 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -1799,8 +1799,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto instr_done;
case LARX:
- if (regs->msr & MSR_LE)
- return 0;
if (op.ea & (size - 1))
break; /* can't handle misaligned */
err = -EFAULT;
@@ -1824,8 +1822,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto ldst_done;
case STCX:
- if (regs->msr & MSR_LE)
- return 0;
if (op.ea & (size - 1))
break; /* can't handle misaligned */
err = -EFAULT;
@@ -1851,8 +1847,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto ldst_done;
case LOAD:
- if (regs->msr & MSR_LE)
- return 0;
err = read_mem(®s->gpr[op.reg], op.ea, size, regs);
if (!err) {
if (op.type & SIGNEXT)
@@ -1864,8 +1858,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#ifdef CONFIG_PPC_FPU
case LOAD_FP:
- if (regs->msr & MSR_LE)
- return 0;
if (size == 4)
err = do_fp_load(op.reg, do_lfs, op.ea, size, regs);
else
@@ -1874,15 +1866,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#endif
#ifdef CONFIG_ALTIVEC
case LOAD_VMX:
- if (regs->msr & MSR_LE)
- return 0;
err = do_vec_load(op.reg, do_lvx, op.ea & ~0xfUL, regs);
goto ldst_done;
#endif
#ifdef CONFIG_VSX
case LOAD_VSX:
- if (regs->msr & MSR_LE)
- return 0;
err = do_vsx_load(op.reg, do_lxvd2x, op.ea, regs);
goto ldst_done;
#endif
@@ -1905,8 +1893,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto instr_done;
case STORE:
- if (regs->msr & MSR_LE)
- return 0;
if ((op.type & UPDATE) && size == sizeof(long) &&
op.reg == 1 && op.update_reg == 1 &&
!(regs->msr & MSR_PR) &&
@@ -1919,8 +1905,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#ifdef CONFIG_PPC_FPU
case STORE_FP:
- if (regs->msr & MSR_LE)
- return 0;
if (size == 4)
err = do_fp_store(op.reg, do_stfs, op.ea, size, regs);
else
@@ -1929,15 +1913,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#endif
#ifdef CONFIG_ALTIVEC
case STORE_VMX:
- if (regs->msr & MSR_LE)
- return 0;
err = do_vec_store(op.reg, do_stvx, op.ea & ~0xfUL, regs);
goto ldst_done;
#endif
#ifdef CONFIG_VSX
case STORE_VSX:
- if (regs->msr & MSR_LE)
- return 0;
err = do_vsx_store(op.reg, do_stxvd2x, op.ea, regs);
goto ldst_done;
#endif
--
1.8.3.1
next prev parent reply other threads:[~2017-02-14 8:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-14 8:02 [PATCH v2 0/2] " Ravi Bangoria
2017-02-14 8:02 ` Ravi Bangoria [this message]
2017-02-14 8:47 ` [PATCH v2 1/2] " Naveen N. Rao
2017-02-14 9:18 ` Ravi Bangoria
2017-02-14 8:02 ` [PATCH v2 2/2] powerpc: emulate_step tests for load/store instructions Ravi Bangoria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487059332-6925-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com \
--to=ravi.bangoria@linux.vnet.ibm.com \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=ast@kernel.org \
--cc=bauerman@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=bsingharora@gmail.com \
--cc=chris@distroguy.com \
--cc=christophe.leroy@c-s.fr \
--cc=duwe@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lsorense@csclub.uwaterloo.ca \
--cc=mpe@ellerman.id.au \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=oohall@gmail.com \
--cc=oss@buserror.net \
--cc=paul.gortmaker@windriver.com \
--cc=paulus@samba.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®