From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751663AbdCAOG0 (ORCPT ); Wed, 1 Mar 2017 09:06:26 -0500 Received: from lelnx193.ext.ti.com ([198.47.27.77]:45349 "EHLO lelnx193.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751548AbdCAOGX (ORCPT ); Wed, 1 Mar 2017 09:06:23 -0500 From: Keerthy To: , CC: , , , , , , , Subject: [PATCH 4/7] ARM: OMAP4460: Thermal: Add slope and offset values Date: Wed, 1 Mar 2017 15:59:47 +0530 Message-ID: <1488364190-23488-5-git-send-email-j-keerthy@ti.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1488364190-23488-1-git-send-email-j-keerthy@ti.com> References: <1488364190-23488-1-git-send-email-j-keerthy@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing. Signed-off-by: Keerthy --- arch/arm/boot/dts/omap4460.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index ef66e12..c43f2a2 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -90,4 +90,8 @@ }; +&cpu_thermal { + coefficients = <348 (-9301)>; +}; + /include/ "omap446x-clocks.dtsi" -- 1.9.1