From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932134AbdCFOCI (ORCPT ); Mon, 6 Mar 2017 09:02:08 -0500 Received: from mailgw02.mediatek.com ([210.61.82.184]:21991 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1754389AbdCFOBx (ORCPT ); Mon, 6 Mar 2017 09:01:53 -0500 From: Chunfeng Yun To: Kishon Vijay Abraham I CC: Matthias Brugger , Felipe Balbi , Rob Herring , Mark Rutland , Ian Campbell , Chunfeng Yun , , , , , Subject: [RESEND PATCH v3 7/8] arm64: dts: mt8173: move clock from phy node into port nodes Date: Mon, 6 Mar 2017 21:49:28 +0800 Message-ID: <1488808169-6031-7-git-send-email-chunfeng.yun@mediatek.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1488808169-6031-1-git-send-email-chunfeng.yun@mediatek.com> References: <1488808169-6031-1-git-send-email-chunfeng.yun@mediatek.com> MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org there is a reference clock for each port, HighSpeed port is 48M, and SuperSpeed port is 26M which usually comes from 26M oscillator directly, but some SoCs is not. it is flexible to move it into port node. Signed-off-by: Chunfeng Yun --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 1dc4629..1c9e0d5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -764,8 +764,6 @@ u3phy: usb-phy@11290000 { compatible = "mediatek,mt8173-u3phy"; reg = <0 0x11290000 0 0x800>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "u3phya_ref"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -773,18 +771,24 @@ u2port0: usb-phy@11290800 { reg = <0 0x11290800 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; u3port0: usb-phy@11290900 { reg = <0 0x11290900 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; u2port1: usb-phy@11291000 { reg = <0 0x11291000 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; -- 1.7.9.5