From: Jon Mason <jon.mason@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Yendapally Reddy Dhananjaya Reddy
<yendapally.reddy@broadcom.com>
Subject: [PATCH] ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
Date: Tue, 7 Mar 2017 18:34:04 -0500 [thread overview]
Message-ID: <1488929644-30321-1-git-send-email-jon.mason@broadcom.com> (raw)
Add the EHCI and OHCI entries to the Northstar Plus device tree files.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/bcm958522er.dts | 10 +++++++++-
arch/arm/boot/dts/bcm958525er.dts | 10 +++++++++-
arch/arm/boot/dts/bcm958525xmc.dts | 8 ++++++++
arch/arm/boot/dts/bcm958622hr.dts | 10 +++++++++-
arch/arm/boot/dts/bcm958623hr.dts | 10 +++++++++-
arch/arm/boot/dts/bcm958625hr.dts | 8 ++++++++
arch/arm/boot/dts/bcm958625k.dts | 8 ++++++++
arch/arm/boot/dts/bcm988312hr.dts | 10 +++++++++-
9 files changed, 83 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 832795b..fbc1d1d 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -306,6 +306,20 @@
status = "disabled";
};
+ ehci0: usb@2a000 {
+ compatible = "generic-ehci";
+ reg = <0x2a000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci0: usb@2b000 {
+ compatible = "generic-ohci";
+ reg = <0x2b000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
rng: rng@33000 {
compatible = "brcm,bcm-nsp-rng";
reg = <0x33000 0x14>;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index df05e7f..f5c4296 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
&amac0 {
status = "okay";
@@ -70,6 +70,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -108,6 +112,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index 4a3ab19..efcb1f6 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
&amac0 {
status = "okay";
@@ -70,6 +70,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -108,6 +112,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 81f7843..23f23bd 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -66,6 +66,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&i2c0 {
temperature-sensor@4c {
compatible = "adi,adt7461a";
@@ -122,6 +126,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index c88b8fe..16ab2d8 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 and SLIC support needed to be complete */
+/* USB 3 and SLIC support needed to be complete */
&amac0 {
status = "okay";
@@ -74,6 +74,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index d503fa0..9b921c6 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 and SLIC support needed to be complete */
+/* USB 3 and SLIC support needed to be complete */
&amac0 {
status = "okay";
@@ -74,6 +74,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index cc0363b..006b08e 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -72,6 +72,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -110,6 +114,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index f8d47e5..64740f8 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -65,6 +65,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -103,6 +107,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 74e15a3..bce251a 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
&amac0 {
status = "okay";
@@ -74,6 +74,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
--
2.7.4
reply other threads:[~2017-03-08 0:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488929644-30321-1-git-send-email-jon.mason@broadcom.com \
--to=jon.mason@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=yendapally.reddy@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®