mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Elaine Zhang <zhangqing@rock-chips.com>
To: lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org
Cc: huangtao@rock-chips.com, xxx@rock-chips.com,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	chenjh@rock-chips.com, Elaine Zhang <zhangqing@rock-chips.com>
Subject: [PATCH v1 2/4] linux: mfd: rk808: add rk805 regs addr and ID
Date: Thu,  9 Mar 2017 16:50:00 +0800	[thread overview]
Message-ID: <1489049402-15791-3-git-send-email-zhangqing@rock-chips.com> (raw)
In-Reply-To: <1489049402-15791-1-git-send-email-zhangqing@rock-chips.com>

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 include/linux/mfd/rk808.h | 91 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 54feb140c210..7f4bab38c1d6 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -206,6 +206,89 @@ enum rk818_reg {
 #define RK818_USB_ILMIN_2000MA		0x7
 #define RK818_USB_CHG_SD_VSEL_MASK	0x70
 
+/* RK805 */
+enum rk805_reg {
+	RK805_ID_DCDC1,
+	RK805_ID_DCDC2,
+	RK805_ID_DCDC3,
+	RK805_ID_DCDC4,
+	RK805_ID_LDO1,
+	RK805_ID_LDO2,
+	RK805_ID_LDO3,
+};
+
+/* INTERRUPT REGISTER */
+#define RK805_INT_STS_REG		0x4C
+#define RK805_INT_STS_MSK_REG		0x4D
+#define RK805_GPIO_IO_POL_REG		0x50
+#define RK805_OUT_REG			0x52
+#define RK805_ON_SOURCE_REG		0xAE
+#define RK805_OFF_SOURCE_REG		0xAF
+
+/* POWER CHANNELS ENABLE REGISTER */
+#define RK805_DCDC_EN_REG		0x23
+#define RK805_SLP_DCDC_EN_REG		0x25
+#define RK805_SLP_LDO_EN_REG		0x26
+#define RK805_LDO_EN_REG		0x27
+
+/* CONFIG REGISTER */
+#define RK805_THERMAL_REG		0x22
+
+/* BUCK AND LDO CONFIG REGISTER */
+#define RK805_BUCK_LDO_SLP_LP_EN_REG	0x2A
+#define RK805_BUCK1_CONFIG_REG		0x2E
+#define RK805_BUCK1_ON_VSEL_REG		0x2F
+#define RK805_BUCK1_SLP_VSEL_REG	0x30
+#define RK805_BUCK2_CONFIG_REG		0x32
+#define RK805_BUCK2_ON_VSEL_REG		0x33
+#define RK805_BUCK2_SLP_VSEL_REG	0x34
+#define RK805_BUCK3_CONFIG_REG		0x36
+#define RK805_BUCK4_CONFIG_REG		0x37
+#define RK805_BUCK4_ON_VSEL_REG		0x38
+#define RK805_BUCK4_SLP_VSEL_REG	0x39
+#define RK805_LDO1_ON_VSEL_REG		0x3B
+#define RK805_LDO1_SLP_VSEL_REG		0x3C
+#define RK805_LDO2_ON_VSEL_REG		0x3D
+#define RK805_LDO2_SLP_VSEL_REG		0x3E
+#define RK805_LDO3_ON_VSEL_REG		0x3F
+#define RK805_LDO3_SLP_VSEL_REG		0x40
+#define RK805_OUT_REG			0x52
+#define RK805_ON_SOURCE_REG		0xAE
+#define RK805_OFF_SOURCE_REG		0xAF
+
+#define RK805_NUM_REGULATORS		7
+
+#define RK805_PWRON_FALL_RISE_INT_EN	0x0
+#define RK805_PWRON_FALL_RISE_INT_MSK	0x81
+
+/* RK805 IRQ Definitions */
+#define RK805_IRQ_PWRON_RISE		0
+#define RK805_IRQ_VB_LOW		1
+#define RK805_IRQ_PWRON			2
+#define RK805_IRQ_PWRON_LP		3
+#define RK805_IRQ_HOTDIE		4
+#define RK805_IRQ_RTC_ALARM		5
+#define RK805_IRQ_RTC_PERIOD		6
+#define RK805_IRQ_PWRON_FALL		7
+
+#define RK805_IRQ_PWRON_RISE_MSK	BIT(0)
+#define RK805_IRQ_VB_LOW_MSK		BIT(1)
+#define RK805_IRQ_PWRON_MSK		BIT(2)
+#define RK805_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK805_IRQ_HOTDIE_MSK		BIT(4)
+#define RK805_IRQ_RTC_ALARM_MSK		BIT(5)
+#define RK805_IRQ_RTC_PERIOD_MSK	BIT(6)
+#define RK805_IRQ_PWRON_FALL_MSK	BIT(7)
+
+#define RK805_PWR_RISE_INT_STATUS	BIT(0)
+#define RK805_VB_LOW_INT_STATUS		BIT(1)
+#define RK805_PWRON_INT_STATUS		BIT(2)
+#define RK805_PWRON_LP_INT_STATUS	BIT(3)
+#define RK805_HOTDIE_INT_STATUS		BIT(4)
+#define RK805_ALARM_INT_STATUS		BIT(5)
+#define RK805_PERIOD_INT_STATUS		BIT(6)
+#define RK805_PWR_FALL_INT_STATUS	BIT(7)
+
 /* RK808 IRQ Definitions */
 #define RK808_IRQ_VOUT_LO	0
 #define RK808_IRQ_VB_LO		1
@@ -298,7 +381,14 @@ enum rk818_reg {
 #define VOUT_LO_INT	BIT(0)
 #define CLK32KOUT2_EN	BIT(0)
 
+#define TEMP115C			0x0c
+#define TEMP_HOTDIE_MSK			0x0c
+#define SLP_SD_MSK			(0x3 << 2)
+#define SHUTDOWN_FUN			(0x2 << 2)
+#define SLEEP_FUN			(0x1 << 2)
 #define RK8XX_ID_MSK			0xfff0
+#define FPWM_MODE			BIT(7)
+
 enum {
 	BUCK_ILMIN_50MA,
 	BUCK_ILMIN_100MA,
@@ -322,6 +412,7 @@ enum {
 };
 
 enum {
+	RK805_ID = 0x8050,
 	RK808_ID = 0x0000,
 	RK818_ID = 0x8181,
 };
-- 
1.9.1

  parent reply	other threads:[~2017-03-09  9:26 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-09  8:49 [PATCH v1 0/4] rk808: Add RK805 support Elaine Zhang
2017-03-09  8:49 ` [PATCH v1 1/4] mfd: rk808: fix up the chip id get failed Elaine Zhang
2017-03-09  8:50 ` Elaine Zhang [this message]
2017-03-09  8:50 ` [PATCH v1 3/4] regulator: rk808: Add regulator driver for RK805 Elaine Zhang
2017-03-09  8:50 ` [PATCH v1 4/4] mfd: rk808: Add RK805 support Elaine Zhang
2017-03-09 10:03 ` [PATCH v1 0/4] " Wadim Egorov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1489049402-15791-3-git-send-email-zhangqing@rock-chips.com \
    --to=zhangqing@rock-chips.com \
    --cc=broonie@kernel.org \
    --cc=chenjh@rock-chips.com \
    --cc=huangtao@rock-chips.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=xxx@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®