[PATCH v2-kernel 4.1] irqdomain: handle the per-CPU irq trigger type settings

[Dongjiu Geng <gengdongjiu@huawei.com>]

when percpu devices set its IRQ trigger type using irq_of_parse
and_map API,it will be failed because irq_set_irq_type is only
for 1-N mode interrupt source,not for per-cpu interrupt source.
so handle per-cpu IRQs for this failure.

problem: per cpu device call irq_of_parse_and_map to set its
timer trigger type IRQ_TYPE_EDGE_RISING, irq_of_parse_and_map
will call irq_create_of_mapping to set trigger_type through
irq_set_irq_type. But irq_set_irq_type uses
IRQ_GET_DESC_CHECK_GLOBAL and not IRQ_GET_DESC_CHECK_PERCPU.
per-cpu IRQ is per-cpu and not global.

solution: storing the type into irqdata, then get this IRQ
type fromirq_get_trigger_type, and enable_percpu_irq sets the
type

Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Haibin Zhang <zhanghaibin7@huawei.com>
---
 kernel/irq/irqdomain.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 9fd618d..8116cf2 100755
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -542,8 +542,16 @@ unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&
-	    type != irq_get_trigger_type(virq))
-		irq_set_irq_type(virq, type);
+	    type != irq_get_trigger_type(virq)) {
+		int ret = 0;
+		struct irq_data *irq_data = irq_get_irq_data(virq);
+
+		ret = irq_set_irq_type(virq, type);
+
+		 /* Handle per-cpu IRQ: just save type in irq_data */
+		if (-EINVAL == ret && irq_data)
+			irqd_set_trigger_type(irq_data, type);
+	}
 	return virq;
 }
 EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-- 
1.7.7