From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753004AbdCWKJw (ORCPT ); Thu, 23 Mar 2017 06:09:52 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:42442 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751123AbdCWKJv (ORCPT ); Thu, 23 Mar 2017 06:09:51 -0400 From: Alexandre TORGUE To: Russell King , Maxime Coquelin CC: , , Arnd Bergmann , Olof Johansson Subject: [PATCH] ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value Date: Thu, 23 Mar 2017 11:09:06 +0100 Message-ID: <1490263746-10512-1-git-send-email-alexandre.torgue@st.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.50] X-ClientProxiedBy: SFHDAG1NODE2.st.com (10.75.127.2) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-03-23_09:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org stm32_defconfig is used for several STM32 MCU: STM32F429, STM32F469, STM32F746 and now STM32H743. Each of MCU listed have different interrupts number mapped on NVIC. STM32F429: 81, STM32F469: 92, STM32F746: 97 and STM32H743: 149. I could set CPU_V7M_NUM_IRQ to 149 but in order to avoid forgetting to update this value for next STM32 MCU I prefer to set it to max value: 240. Signed-off-by: Alexandre TORGUE diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index a9d8e3c..7c9c157 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -20,6 +20,7 @@ CONFIG_EMBEDDED=y # CONFIG_MMU is not set CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_STM32=y +CONFIG_CPU_V7M_NUM_IRQ=240 CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x90000000 CONFIG_FLASH_MEM_BASE=0x08000000 -- 1.9.1