mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Elaine Zhang <zhangqing@rock-chips.com>
To: lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org
Cc: huangtao@rock-chips.com, xxx@rock-chips.com,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	chenjh@rock-chips.com, robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, w.egorov@phytec.de,
	Elaine Zhang <zhangqing@rock-chips.com>
Subject: [PATCH v5 0/7] rk808: Add RK805 support
Date: Mon, 27 Mar 2017 14:21:38 +0800	[thread overview]
Message-ID: <1490595705-28844-1-git-send-email-zhangqing@rock-chips.com> (raw)

change in v5:
PATCH V5 1/7: NO change in V5
PATCH V5 2/7: fix the rk805 reg addr in numerical order
PATCH V5 3/7: NO change in V5
PATCH V5 4/7: fix up the rk805_device_shutdown func
PATCH V5 5/7: NO change in V5
PATCH V5 6/7: NO change in V5
PATCH V5 7/7: fix up the description of the rk805

change in v4:
PATCH V4 1/7: NO change in V4
PATCH V4 2/7: rename the commit message
PATCH V4 3/7: NO change in V4
PATCH V4 4/7: Split this patch up into subsystems patch 5/7 6/7
PATCH V4 5/7: new added
PATCH V4 6/7: new added
PATCH V4 7/7: NO change in V4


change in V3:
PATCH V3 1/5: NO change in V3
PATCH V3 2/5: add rk805 RTC INT MASK define
PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
              use rk805_regs_ops and rk805_switch_ops
PATCH V3 4/5: fix up the shutdown func
              use pm_shutdown_prepare_fn to prepare shutdown
              and pm_pwroff_fn pull down gpio to shut down rk805
              it will update in the future(after rk808 support gpio func)
PATCH V3 5/5: NO change in V3

change in V2:
PATCH V2 1/5: NO change in V2
PATCH V2 2/5: add rk805 BUCK ILMAX define
PATCH V2 3/5: NO change in V2
PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
PATCH V2 5/5: Add RK805 device tree bindings document

Elaine Zhang (7):
  mfd: rk808: fix up the chip id get failed
  mfd: rk808: add rk805 regs addr and ID
  regulator: rk808: Add regulator driver for RK805
  mfd: rk808: Add RK805 support
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808
  mfd: dt-bindings: Add RK805 device tree bindings document

 Documentation/devicetree/bindings/mfd/rk808.txt |  20 +++-
 drivers/clk/Kconfig                             |   4 +-
 drivers/mfd/Kconfig                             |   4 +-
 drivers/mfd/rk808.c                             | 129 +++++++++++++++++++++--
 drivers/regulator/Kconfig                       |   4 +-
 drivers/regulator/rk808-regulator.c             | 130 ++++++++++++++++++++++++
 drivers/rtc/Kconfig                             |   4 +-
 include/linux/mfd/rk808.h                       | 121 ++++++++++++++++++++++
 8 files changed, 401 insertions(+), 15 deletions(-)

-- 
1.9.1

             reply	other threads:[~2017-03-27  6:21 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-27  6:21 Elaine Zhang [this message]
2017-03-27  6:21 ` [PATCH v5 1/7] mfd: rk808: fix up the chip id get failed Elaine Zhang
2017-04-03 11:00   ` Lee Jones
2017-03-27  6:21 ` [PATCH v5 2/7] mfd: rk808: add rk805 regs addr and ID Elaine Zhang
2017-04-03 11:04   ` Lee Jones
2017-03-27  6:21 ` [PATCH v5 3/7] regulator: rk808: Add regulator driver for RK805 Elaine Zhang
2017-03-27  9:40   ` Mark Brown
2017-03-27  6:21 ` [PATCH v5 4/7] mfd: rk808: Add RK805 support Elaine Zhang
2017-04-03 11:05   ` Lee Jones
2017-03-27  6:23 ` [PATCH v5 5/7] clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 Elaine Zhang
2017-03-27  6:23 ` [PATCH v5 6/7] rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808 Elaine Zhang
2017-03-27  6:23 ` [PATCH v5 7/7] mfd: dt-bindings: Add RK805 device tree bindings document Elaine Zhang
2017-03-27  6:53 ` [PATCH RESEND " Elaine Zhang
2017-03-31 18:53   ` Rob Herring
2017-04-03 11:06   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490595705-28844-1-git-send-email-zhangqing@rock-chips.com \
    --to=zhangqing@rock-chips.com \
    --cc=broonie@kernel.org \
    --cc=chenjh@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=huangtao@rock-chips.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=w.egorov@phytec.de \
    --cc=xxx@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®