From: Mars Cheng <mars.cheng@mediatek.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: CC Hwang <cc.hwang@mediatek.com>,
Loda Chou <loda.chou@mediatek.com>,
Miles Chen <miles.chen@mediatek.com>,
Jades Shih <jades.shih@mediatek.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
Kevin-CW Chen <kevin-cw.chen@mediatek.com>,
<linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>, <wsd_upstream@mediatek.com>,
Mars Cheng <mars.cheng@mediatek.com>
Subject: [PATCH v4 10/10] arm64: dts: mediatek: add clk and scp nodes for MT6797
Date: Sat, 8 Apr 2017 09:20:35 +0800 [thread overview]
Message-ID: <1491614435-23754-11-git-send-email-mars.cheng@mediatek.com> (raw)
In-Reply-To: <1491614435-23754-1-git-send-email-mars.cheng@mediatek.com>
This adds clk and scp nodes for MT6797
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 71 ++++++++++++++++++++++++++++--
1 file changed, 67 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index cf4529e..3512c8e 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -11,6 +11,8 @@
* GNU General Public License for more details.
*/
+#include <dt-bindings/clock/mt6797-clk.h>
+#include <dt-bindings/power/mt6797-power.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -123,6 +125,35 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
+ topckgen: topckgen@10000000 {
+ compatible = "mediatek,mt6797-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infrasys: infracfg_ao@10001000 {
+ compatible = "mediatek,mt6797-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ scpsys: scpsys@10006000 {
+ compatible = "mediatek,mt6797-scpsys";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ clocks = <&topckgen CLK_TOP_MUX_MFG>,
+ <&topckgen CLK_TOP_MUX_MM>,
+ <&topckgen CLK_TOP_MUX_VDEC>;
+ clock-names = "mfg", "mm", "vdec";
+ infracfg = <&infrasys>;
+ };
+
+ apmixedsys: apmixed@1000c000 {
+ compatible = "mediatek,mt6797-apmixedsys";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
sysirq: intpol-controller@10200620 {
compatible = "mediatek,mt6797-sysirq",
"mediatek,mt6577-sysirq";
@@ -138,7 +169,9 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&clk26m>;
+ clocks = <&infrasys CLK_INFRA_UART0>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -147,7 +180,9 @@
"mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&clk26m>;
+ clocks = <&infrasys CLK_INFRA_UART1>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -156,7 +191,9 @@
"mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&clk26m>;
+ clocks = <&infrasys CLK_INFRA_UART2>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -165,10 +202,36 @@
"mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&clk26m>;
+ clocks = <&infrasys CLK_INFRA_UART3>,
+ <&infrasys CLK_INFRA_AP_DMA>;
+ clock-names = "baud", "bus";
status = "disabled";
};
+ mmsys: mmsys_config@14000000 {
+ compatible = "mediatek,mt6797-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: imgsys_config@15000000 {
+ compatible = "mediatek,mt6797-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: vdec_gcon@16000000 {
+ compatible = "mediatek,mt6797-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: venc_gcon@17000000 {
+ compatible = "mediatek,mt6797-vencsys", "syscon";
+ reg = <0 0x17000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@19000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
--
1.7.9.5
next prev parent reply other threads:[~2017-04-08 1:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-08 1:20 [PATCH v4 00/10] Add Basic SoC support " Mars Cheng
2017-04-08 1:20 ` [PATCH v4 01/10] dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform Mars Cheng
2017-04-08 1:20 ` [PATCH v4 02/10] arm64: dts: mediatek: add mt6797 support Mars Cheng
2017-04-08 1:20 ` [PATCH v4 03/10] dt-bindings: arm: mediatek: document clk bindings for MT6797 Mars Cheng
2017-04-19 16:27 ` Stephen Boyd
2017-04-08 1:20 ` [PATCH v4 04/10] clk: mediatek: add mt6797 clock IDs Mars Cheng
2017-04-08 1:20 ` [PATCH v4 05/10] clk: mediatek: add clk support for MT6797 Mars Cheng
2017-04-19 16:19 ` Stephen Boyd
2017-04-08 1:20 ` [PATCH v4 06/10] soc: mediatek: avoid using fixed spm power status defines Mars Cheng
2017-04-08 1:20 ` [PATCH v4 07/10] soc: mediatek: add vdec item for scpsys Mars Cheng
2017-04-08 1:20 ` [PATCH v4 08/10] dt-bindings: mediatek: add MT6797 power dt-bindings Mars Cheng
2017-04-13 20:02 ` Rob Herring
2017-04-08 1:20 ` [PATCH v4 09/10] soc: mediatek: add MT6797 scpsys support Mars Cheng
2017-04-08 1:20 ` Mars Cheng [this message]
2017-04-16 3:42 ` [PATCH v4 00/10] Add Basic SoC support for MT6797 Mars Cheng
2017-05-10 9:27 ` Matthias Brugger
2017-05-10 10:37 ` Mars Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491614435-23754-11-git-send-email-mars.cheng@mediatek.com \
--to=mars.cheng@mediatek.com \
--cc=cc.hwang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=jades.shih@mediatek.com \
--cc=kevin-cw.chen@mediatek.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=loda.chou@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=miles.chen@mediatek.com \
--cc=sboyd@codeaurora.org \
--cc=wsd_upstream@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome