[PATCH 2/3] ASoC: hisilicon: Address style nit to use break in final default of switch statement

[John Stultz <john.stultz@linaro.org>]

Mark Brown suggested a style change to use break in the final
default of a switch statement, so this patch addresses that.

Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Cc: Dave Long <dave.long@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 sound/soc/hisilicon/hi6210-i2s.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/hisilicon/hi6210-i2s.c b/sound/soc/hisilicon/hi6210-i2s.c
index 1909bfc..27553dc 100644
--- a/sound/soc/hisilicon/hi6210-i2s.c
+++ b/sound/soc/hisilicon/hi6210-i2s.c
@@ -324,6 +324,7 @@ static int hi6210_i2s_hw_params(struct snd_pcm_substream *substream,
 	default:
 		i2s->bits = 16;
 		dma_data->addr_width = 2;
+		break;
 	}
 	i2s->rate = params_rate(params);
 	i2s->channels = params_channels(params);
@@ -442,6 +443,7 @@ static int hi6210_i2s_hw_params(struct snd_pcm_substream *substream,
 		val = hi6210_read_reg(i2s, HII2S_I2S_CFG);
 		val &= ~HII2S_I2S_CFG__S2_FRAME_MODE;
 		hi6210_write_reg(i2s, HII2S_I2S_CFG, val);
+		break;
 	}
 
 	/* clear loopback, set signed type and word length */
-- 
2.7.4