From: Ludovic Barre <ludovic.Barre@st.com>
To: Cyrille Pitchen <cyrille.pitchen@atmel.com>,
Marek Vasut <marek.vasut@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Richard Weinberger <richard@nod.at>,
Alexandre Torgue <alexandre.torgue@st.com>,
Rob Herring <robh+dt@kernel.org>, <linux-mtd@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v3 0/2] mtd: spi-nor: add stm32 qspi driver
Date: Wed, 12 Apr 2017 19:06:23 +0200 [thread overview]
Message-ID: <1492016785-24976-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch set adds a SPI-NOR driver for stm32 QSPI controller.
It is a specialized SPI interface for serial Flash devices.
It supports 1 or 2 Flash device with single, dual and quad SPI Flash memories.
It can operate in any of the following modes:
-indirect mode: all the operations are performed using the quadspi
registers
-read memory-mapped mode: the external Flash memory is mapped to the
microcontroller address space and is seen by the system as if it was
an internal memory
Changes in v3:
-dt-bindings: qspi_mm not optional
-dt-bindings: see ../spi/spi-bus.txt
-dt-bindings: spi@...
-cmd flat struct
-ratelimit
-macro to avoid hard value "25"
Changes in v2:
-awful construct: s/u32/u8
-add define for timeout
-Use a helper variable
-add comment on "stm32 qspi controller fsize issue
Ludovic Barre (2):
dt-bindings: Document the STM32 QSPI bindings
mtd: spi-nor: add driver for STM32 quad spi flash controller
.../devicetree/bindings/mtd/stm32-quadspi.txt | 43 ++
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/stm32-quadspi.c | 693 +++++++++++++++++++++
4 files changed, 744 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/stm32-quadspi.c
--
2.7.4
next reply other threads:[~2017-04-12 17:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-12 17:06 Ludovic Barre [this message]
2017-04-12 17:06 ` [PATCH v3 1/2] dt-bindings: Document the STM32 QSPI bindings Ludovic Barre
2017-04-12 17:06 ` [PATCH v3 2/2] mtd: spi-nor: add driver for STM32 quad spi flash controller Ludovic Barre
2017-04-12 20:28 ` Cyrille Pitchen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492016785-24976-1-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@atmel.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®