From: Andriy Gelman <andriy.gelman@gmail.com>
To: gregkh@linuxfoundation.org, wsa@the-dreams.de, bhumirks@gmail.com
Cc: linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
andriy.gelman@gmail.com
Subject: [PATCH] Added paranthesis around complex define statements
Date: Fri, 21 Apr 2017 05:15:46 +0000 [thread overview]
Message-ID: <1492751746-8418-1-git-send-email-andriy.gelman@gmail.com> (raw)
This is a patch to the ks_wlan_ioctl.h file that fixes paranthesis error
found by the checkpatch.pl tool
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
---
drivers/staging/ks7010/ks_wlan_ioctl.h | 53 +++++++++++++++++-----------------
1 file changed, 26 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/ks7010/ks_wlan_ioctl.h b/drivers/staging/ks7010/ks_wlan_ioctl.h
index 8e62b10..851f563 100644
--- a/drivers/staging/ks7010/ks_wlan_ioctl.h
+++ b/drivers/staging/ks7010/ks_wlan_ioctl.h
@@ -1,6 +1,6 @@
/*
* Driver for KeyStream 11b/g wireless LAN
- *
+ *
* Copyright (c) 2005-2008 KeyStream Corp.
* Copyright (C) 2009 Renesas Technology Corp.
*
@@ -18,38 +18,38 @@
/* SIOCIWFIRSTPRIV + 0 */
/* former KS_WLAN_GET_DRIVER_VERSION SIOCIWFIRSTPRIV + 1 */
/* SIOCIWFIRSTPRIV + 2 */
-#define KS_WLAN_GET_FIRM_VERSION SIOCIWFIRSTPRIV + 3
+#define KS_WLAN_GET_FIRM_VERSION (SIOCIWFIRSTPRIV + 3)
#ifdef WPS
-#define KS_WLAN_SET_WPS_ENABLE SIOCIWFIRSTPRIV + 4
-#define KS_WLAN_GET_WPS_ENABLE SIOCIWFIRSTPRIV + 5
-#define KS_WLAN_SET_WPS_PROBE_REQ SIOCIWFIRSTPRIV + 6
+#define KS_WLAN_SET_WPS_ENABLE (SIOCIWFIRSTPRIV + 4)
+#define KS_WLAN_GET_WPS_ENABLE (SIOCIWFIRSTPRIV + 5)
+#define KS_WLAN_SET_WPS_PROBE_REQ (SIOCIWFIRSTPRIV + 6)
#endif
-#define KS_WLAN_GET_EEPROM_CKSUM SIOCIWFIRSTPRIV + 7
-#define KS_WLAN_SET_PREAMBLE SIOCIWFIRSTPRIV + 8
-#define KS_WLAN_GET_PREAMBLE SIOCIWFIRSTPRIV + 9
-#define KS_WLAN_SET_POWER_SAVE SIOCIWFIRSTPRIV + 10
-#define KS_WLAN_GET_POWER_SAVE SIOCIWFIRSTPRIV + 11
-#define KS_WLAN_SET_SCAN_TYPE SIOCIWFIRSTPRIV + 12
-#define KS_WLAN_GET_SCAN_TYPE SIOCIWFIRSTPRIV + 13
-#define KS_WLAN_SET_RX_GAIN SIOCIWFIRSTPRIV + 14
-#define KS_WLAN_GET_RX_GAIN SIOCIWFIRSTPRIV + 15
-#define KS_WLAN_HOSTT SIOCIWFIRSTPRIV + 16 /* unused */
+#define KS_WLAN_GET_EEPROM_CKSUM (SIOCIWFIRSTPRIV + 7)
+#define KS_WLAN_SET_PREAMBLE (SIOCIWFIRSTPRIV + 8)
+#define KS_WLAN_GET_PREAMBLE (SIOCIWFIRSTPRIV + 9)
+#define KS_WLAN_SET_POWER_SAVE (SIOCIWFIRSTPRIV + 10)
+#define KS_WLAN_GET_POWER_SAVE (SIOCIWFIRSTPRIV + 11)
+#define KS_WLAN_SET_SCAN_TYPE (SIOCIWFIRSTPRIV + 12)
+#define KS_WLAN_GET_SCAN_TYPE (SIOCIWFIRSTPRIV + 13)
+#define KS_WLAN_SET_RX_GAIN (SIOCIWFIRSTPRIV + 14)
+#define KS_WLAN_GET_RX_GAIN (SIOCIWFIRSTPRIV + 15)
+#define KS_WLAN_HOSTT (SIOCIWFIRSTPRIV + 16) /* unused */
//#define KS_WLAN_SET_REGION SIOCIWFIRSTPRIV + 17
-#define KS_WLAN_SET_BEACON_LOST SIOCIWFIRSTPRIV + 18
-#define KS_WLAN_GET_BEACON_LOST SIOCIWFIRSTPRIV + 19
+#define KS_WLAN_SET_BEACON_LOST (SIOCIWFIRSTPRIV + 18)
+#define KS_WLAN_GET_BEACON_LOST (SIOCIWFIRSTPRIV + 19)
-#define KS_WLAN_SET_TX_GAIN SIOCIWFIRSTPRIV + 20
-#define KS_WLAN_GET_TX_GAIN SIOCIWFIRSTPRIV + 21
+#define KS_WLAN_SET_TX_GAIN (SIOCIWFIRSTPRIV + 20)
+#define KS_WLAN_GET_TX_GAIN (SIOCIWFIRSTPRIV + 21)
/* for KS7010 */
-#define KS_WLAN_SET_PHY_TYPE SIOCIWFIRSTPRIV + 22
-#define KS_WLAN_GET_PHY_TYPE SIOCIWFIRSTPRIV + 23
-#define KS_WLAN_SET_CTS_MODE SIOCIWFIRSTPRIV + 24
-#define KS_WLAN_GET_CTS_MODE SIOCIWFIRSTPRIV + 25
+#define KS_WLAN_SET_PHY_TYPE (SIOCIWFIRSTPRIV + 22)
+#define KS_WLAN_GET_PHY_TYPE (SIOCIWFIRSTPRIV + 23)
+#define KS_WLAN_SET_CTS_MODE (SIOCIWFIRSTPRIV + 24)
+#define KS_WLAN_GET_CTS_MODE (SIOCIWFIRSTPRIV + 25)
/* SIOCIWFIRSTPRIV + 26 */
/* SIOCIWFIRSTPRIV + 27 */
-#define KS_WLAN_SET_SLEEP_MODE SIOCIWFIRSTPRIV + 28 /* sleep mode */
-#define KS_WLAN_GET_SLEEP_MODE SIOCIWFIRSTPRIV + 29 /* sleep mode */
+#define KS_WLAN_SET_SLEEP_MODE (SIOCIWFIRSTPRIV + 28) /* sleep mode */
+#define KS_WLAN_GET_SLEEP_MODE (SIOCIWFIRSTPRIV + 29) /* sleep mode */
/* SIOCIWFIRSTPRIV + 30 */
/* SIOCIWFIRSTPRIV + 31 */
@@ -59,8 +59,7 @@
#include <linux/netdevice.h>
int ks_wlan_read_config_file(struct ks_wlan_private *priv);
-int ks_wlan_setup_parameter(struct ks_wlan_private *priv,
- unsigned int commit_flag);
+int ks_wlan_setup_parameter(struct ks_wlan_private *priv, int commit_flag);
#endif /* __KERNEL__ */
--
2.7.4
next reply other threads:[~2017-04-21 5:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-21 5:15 Andriy Gelman [this message]
2017-04-21 5:23 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492751746-8418-1-git-send-email-andriy.gelman@gmail.com \
--to=andriy.gelman@gmail.com \
--cc=bhumirks@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®