mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Christian König" <deathsimple@vodafone.de>
To: linux-pci@vger.kernel.org, platform-driver-x86@vger.kernel.org,
	helgaas@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/5] PCI: add functionality for resizing resources v4
Date: Thu,  4 May 2017 11:31:08 +0200	[thread overview]
Message-ID: <1493890270-1188-4-git-send-email-deathsimple@vodafone.de> (raw)
In-Reply-To: <1493890270-1188-1-git-send-email-deathsimple@vodafone.de>

From: Christian König <christian.koenig@amd.com>

This allows device drivers to request resizing their BARs.

The function only tries to reprogram the windows of the bridge directly above
the requesting device and only the BAR of the same type (usually mem, 64bit,
prefetchable). This is done to make sure not to disturb other drivers by
changing the BARs of their devices.

If reprogramming the bridge BAR fails the old status is restored and -ENOSPC
returned to the calling device driver.

v2: rebase on changes in rbar support
v3: style cleanups, fail if memory decoding is enabled or resources
    still allocated, resize all unused bridge BARs,
    drop calling pci_reenable_device
v4: print resources before releasing them, style cleanups,
    use pci_rbar_size_to_bytes, use PCI_RES_TYPE_MASK

Signed-off-by: Christian König <christian.koenig@amd.com>
---
 drivers/pci/setup-bus.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/pci/setup-res.c | 59 +++++++++++++++++++++++++++++
 include/linux/pci.h     |  3 ++
 3 files changed, 160 insertions(+)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index bb1001e..2b73e0e 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1919,6 +1919,104 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
 }
 EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
 
+int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type)
+{
+	struct pci_dev_resource *dev_res;
+	LIST_HEAD(saved);
+	LIST_HEAD(added);
+	LIST_HEAD(failed);
+	unsigned int i;
+	int ret;
+
+	/* Walk to the root BUS, releasing bridge BARs when possible */
+	while (1) {
+		for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCE_END;
+		     i++) {
+			struct resource *res = &bridge->resource[i];
+
+			if ((res->flags ^ type) & PCI_RES_TYPE_MASK)
+				continue;
+
+			/* Ignore BARs which are still in use */
+			if (res->child)
+				continue;
+
+			ret = add_to_list(&saved, bridge, res, 0, 0);
+			if (ret)
+				goto cleanup;
+
+			dev_info(&bridge->dev, "BAR %d: releasing %pR\n",
+				 i, res);
+
+			if (res->parent)
+				release_resource(res);
+			res->start = 0;
+			res->end = 0;
+			break;
+		}
+		if (i == PCI_BRIDGE_RESOURCE_END)
+			break;
+
+		if (!bridge->bus || !bridge->bus->self)
+			break;
+
+		bridge = bridge->bus->self;
+	}
+
+	if (list_empty(&saved))
+		return -ENOENT;
+
+	__pci_bus_size_bridges(bridge->subordinate, &added);
+	__pci_bridge_assign_resources(bridge, &added, &failed);
+	BUG_ON(!list_empty(&added));
+
+	if (!list_empty(&failed)) {
+		ret = -ENOSPC;
+		goto cleanup;
+	}
+
+	list_for_each_entry(dev_res, &saved, list) {
+		/* Skip the bridge we just assigned resources for. */
+		if (bridge == dev_res->dev)
+			continue;
+
+		bridge = dev_res->dev;
+		pci_setup_bridge(bridge->subordinate);
+	}
+
+	free_list(&saved);
+	return 0;
+
+cleanup:
+	/* restore size and flags */
+	list_for_each_entry(dev_res, &failed, list) {
+		struct resource *res = dev_res->res;
+
+		res->start = dev_res->start;
+		res->end = dev_res->end;
+		res->flags = dev_res->flags;
+	}
+	free_list(&failed);
+
+	/* Revert to the old configuration */
+	list_for_each_entry(dev_res, &saved, list) {
+		struct resource *res = dev_res->res;
+
+		bridge = dev_res->dev;
+		i = res - bridge->resource;
+
+		res->start = dev_res->start;
+		res->end = dev_res->end;
+		res->flags = dev_res->flags;
+
+		pci_claim_resource(bridge, i);
+		pci_setup_bridge(bridge->subordinate);
+	}
+	free_list(&saved);
+
+	return ret;
+}
+
 void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 9526e34..65420ac 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -363,6 +363,65 @@ int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsiz
 	return 0;
 }
 
+void pci_release_resource(struct pci_dev *dev, int resno)
+{
+	struct resource *res = dev->resource + resno;
+
+	dev_info(&dev->dev, "BAR %d: releasing %pR\n", resno, res);
+	release_resource(res);
+	res->end = resource_size(res) - 1;
+	res->start = 0;
+	res->flags |= IORESOURCE_UNSET;
+}
+EXPORT_SYMBOL(pci_release_resource);
+
+int pci_resize_resource(struct pci_dev *dev, int resno, int size)
+{
+	struct resource *res = dev->resource + resno;
+	int old, ret = 0;
+	u32 sizes;
+	u16 cmd;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	if (cmd & PCI_COMMAND_MEMORY)
+		return -EBUSY;
+
+	sizes = pci_rbar_get_possible_sizes(dev, resno);
+	if (!sizes)
+		return -ENOTSUPP;
+
+	if (!(sizes & BIT(size)))
+		return -EINVAL;
+
+	old = pci_rbar_get_current_size(dev, resno);
+	if (old < 0)
+		return old;
+
+	/* Make sure the resource isn't assigned before making it larger. */
+	pci_release_resource(dev, resno);
+
+	ret = pci_rbar_set_size(dev, resno, size);
+	if (ret)
+		goto error_reassign;
+
+	res->end = res->start + pci_rbar_size_to_bytes(size) - 1;
+
+	ret = pci_reassign_bridge_resources(dev->bus->self, res->flags);
+	if (ret)
+		goto error_resize;
+
+	return 0;
+
+error_resize:
+	pci_rbar_set_size(dev, resno, old);
+	res->end = res->start + pci_rbar_size_to_bytes(old) - 1;
+
+error_reassign:
+	pci_assign_unassigned_bus_resources(dev->bus);
+	return ret;
+}
+EXPORT_SYMBOL(pci_resize_resource);
+
 int pci_enable_resources(struct pci_dev *dev, int mask)
 {
 	u16 cmd, old_cmd;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a38772a..f0a630a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1055,6 +1055,8 @@ void pci_reset_bridge_secondary_bus(struct pci_dev *dev);
 void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
 int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
+void pci_release_resource(struct pci_dev *dev, int resno);
+int __must_check pci_resize_resource(struct pci_dev *dev, int i, int size);
 int pci_select_bars(struct pci_dev *dev, unsigned long flags);
 bool pci_device_is_present(struct pci_dev *pdev);
 void pci_ignore_hotplug(struct pci_dev *dev);
@@ -1135,6 +1137,7 @@ void pci_assign_unassigned_resources(void);
 void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
 void pci_assign_unassigned_bus_resources(struct pci_bus *bus);
 void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus);
+int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type);
 void pdev_enable_device(struct pci_dev *);
 int pci_enable_resources(struct pci_dev *, int mask);
 void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
-- 
2.7.4

  parent reply	other threads:[~2017-05-04  9:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-04  9:31 Resizeable PCI BAR support v5 Christian König
2017-05-04  9:31 ` [PATCH 1/5] PCI: add a define for the PCI resource type mask Christian König
2017-05-07 10:48   ` Andy Shevchenko
2017-05-04  9:31 ` [PATCH 2/5] PCI: add resizeable BAR infrastructure v5 Christian König
2017-05-07 10:52   ` Andy Shevchenko
2017-05-04  9:31 ` Christian König [this message]
2017-05-07 10:58   ` [PATCH 3/5] PCI: add functionality for resizing resources v4 Andy Shevchenko
2017-05-04  9:31 ` [PATCH 4/5] x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 30h-3fh) Processors v3 Christian König
2017-05-07 11:03   ` Andy Shevchenko
2017-05-04  9:31 ` [PATCH 5/5] drm/amdgpu: resize VRAM BAR for CPU access v2 Christian König
2017-05-07 10:50 ` Resizeable PCI BAR support v5 Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1493890270-1188-4-git-send-email-deathsimple@vodafone.de \
    --to=deathsimple@vodafone.de \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®