From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-kbuild@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>,
Nicolas Dichtel <nicolas.dichtel@6wind.com>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Michal Marek <mmarek@suse.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] kbuild: skip install/check of headers right under uapi directories
Date: Tue, 16 May 2017 14:15:03 +0900 [thread overview]
Message-ID: <1494911703-16619-1-git-send-email-yamada.masahiro@socionext.com> (raw)
Since commit 61562f981e92 ("uapi: export all arch specifics
directories"), "make INSTALL_HDR_PATH=$root/usr headers_install"
deletes standard glibc headers and others in $root/usr/include.
The cause of the issue is that headers_install now starts descending
from arch/$(hdr-arch)/include/uapi with $root/usr/include for its
destination when installing asm headers. So, headers already there
are assumed to be unwanted.
When headers_install starts descending from include/uapi with
$root/usr/include for its destination, it works around the problem
by creating an dummy destination $root/usr/include/uapi, but this
is tricky.
To fix the problem in a clean way is to skip headers install/check
in include/uapi or arch/$(hdr-arch)/include/uapi because we know
there are only sub-directories in uapi directories. A good side
effect is the empty destination $root/usr/include/uapi will go
away.
I am also removing the trailing slash in the headers_check target to
skip checking in arch/$(hdr-arch)/include/uapi.
Fixes: 61562f981e92 ("uapi: export all arch specifics directories")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
Changes in v2:
- Remove trailing slash from $(hdr-inst)=... of headers_check
Makefile | 2 +-
| 43 +++++++++++++++++++++++++++----------------
2 files changed, 28 insertions(+), 17 deletions(-)
diff --git a/Makefile b/Makefile
index b400c06..b1ee4a4 100644
--- a/Makefile
+++ b/Makefile
@@ -1172,7 +1172,7 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/ $(hdr-dst) HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
# Kernel selftest
--git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 6ba97a1..ce753a4 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -8,6 +8,29 @@
#
# ==========================================================================
+PHONY := __headers
+__headers:
+
+include scripts/Kbuild.include
+
+srcdir := $(srctree)/$(obj)
+subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
+# caller may set destination dir (when installing to asm/)
+_dst := $(if $(dst),$(dst),$(obj))
+
+# Recursion
+__headers: $(subdirs)
+
+.PHONY: $(subdirs)
+$(subdirs):
+ $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
+
+# Skip header install/check for include/uapi and arch/$(hdr-arch)/include/uapi.
+# We have only sub-directories there.
+skip-inst := $(if $(filter %/uapi,$(obj)),1)
+
+ifeq ($(skip-inst),)
+
# generated header directory
gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
@@ -15,21 +38,14 @@ gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
-# called may set destination dir (when installing to asm/)
-_dst := $(if $(dst),$(dst),$(obj))
-
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
include $(old-kbuild-file)
endif
-include scripts/Kbuild.include
-
installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
-srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
-subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
header-files := $(notdir $(wildcard $(srcdir)/*.h))
header-files += $(notdir $(wildcard $(srcdir)/*.agh))
header-files := $(filter-out $(no-export-headers), $(header-files))
@@ -88,11 +104,9 @@ quiet_cmd_check = CHECK $(printdir) ($(words $(all-files)) files)
$(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
touch $@
-PHONY += __headersinst __headerscheck
-
ifndef HDRCHECK
# Rules for installing headers
-__headersinst: $(subdirs) $(install-file)
+__headers: $(install-file)
@:
targets += $(install-file)
@@ -104,7 +118,7 @@ $(install-file): scripts/headers_install.sh \
$(call if_changed,install)
else
-__headerscheck: $(subdirs) $(check-file)
+__headers: $(check-file)
@:
targets += $(check-file)
@@ -113,11 +127,6 @@ $(check-file): scripts/headers_check.pl $(output-files) FORCE
endif
-# Recursion
-.PHONY: $(subdirs)
-$(subdirs):
- $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
-
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard \
$(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
@@ -126,6 +135,8 @@ ifneq ($(cmd_files),)
include $(cmd_files)
endif
+endif # skip-inst
+
.PHONY: $(PHONY)
PHONY += FORCE
FORCE: ;
--
2.7.4
next reply other threads:[~2017-05-16 5:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-16 5:15 Masahiro Yamada [this message]
2017-05-16 7:40 ` Nicolas Dichtel
2017-05-17 17:22 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494911703-16619-1-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=dan.j.williams@intel.com \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mmarek@suse.com \
--cc=nicolas.dichtel@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®