mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steve Longerbeam <slongerbeam@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	kernel@pengutronix.de, fabio.estevam@nxp.com,
	linux@armlinux.org.uk, mchehab@kernel.org, hverkuil@xs4all.nl,
	nick@shmanahar.org, markus.heiser@darmarIT.de,
	p.zabel@pengutronix.de,
	laurent.pinchart+renesas@ideasonboard.com, bparrot@ti.com,
	geert@linux-m68k.org, arnd@arndb.de, sudipm.mukherjee@gmail.com,
	minghsiu.tsai@mediatek.com, tiffany.lin@mediatek.com,
	jean-christophe.trotin@st.com, horms+renesas@verge.net.au,
	niklas.soderlund+renesas@ragnatech.se, robert.jarzmik@free.fr,
	songjun.wu@microchip.com, andrew-ct.chen@mediatek.com,
	gregkh@linuxfoundation.org, shuah@kernel.org,
	sakari.ailus@linux.intel.com, pavel@ucw.cz
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org, devel@driverdev.osuosl.org
Subject: [PATCH v7 30/34] media: imx: csi: add sink selection rectangles
Date: Wed, 24 May 2017 17:29:45 -0700	[thread overview]
Message-ID: <1495672189-29164-31-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1495672189-29164-1-git-send-email-steve_longerbeam@mentor.com>

From: Philipp Zabel <p.zabel@pengutronix.de>

Move the crop rectangle to the sink pad and add a sink compose rectangle
to configure scaling. Also propagate rectangles from sink pad to crop
rectangle, to compose rectangle, and to the source pads both in ACTIVE
and TRY variants of set_fmt/selection, and initialize the default crop
and compose rectangles.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/staging/media/imx/imx-media-csi.c | 153 +++++++++++++++++++++++-------
 1 file changed, 117 insertions(+), 36 deletions(-)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index ed3748a..9766dee 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -80,6 +80,7 @@ struct csi_priv {
 	const struct imx_media_pixfmt *cc[CSI_NUM_PADS];
 	struct v4l2_fract frame_interval[CSI_NUM_PADS];
 	struct v4l2_rect crop;
+	struct v4l2_rect compose;
 	const struct csi_skip_desc *skip;
 
 	/* active vb2 buffers to send to video dev sink */
@@ -589,8 +590,8 @@ static int csi_setup(struct csi_priv *priv)
 	ipu_csi_set_window(priv->csi, &priv->crop);
 
 	ipu_csi_set_downsize(priv->csi,
-			     priv->crop.width == 2 * outfmt->width,
-			     priv->crop.height == 2 * outfmt->height);
+			     priv->crop.width == 2 * priv->compose.width,
+			     priv->crop.height == 2 * priv->compose.height);
 
 	ipu_csi_init_interface(priv->csi, &sensor_mbus_cfg, &if_fmt);
 
@@ -1072,6 +1073,17 @@ __csi_get_crop(struct csi_priv *priv, struct v4l2_subdev_pad_config *cfg,
 		return &priv->crop;
 }
 
+static struct v4l2_rect *
+__csi_get_compose(struct csi_priv *priv, struct v4l2_subdev_pad_config *cfg,
+		  enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_compose(&priv->sd, cfg,
+						   CSI_SINK_PAD);
+	else
+		return &priv->compose;
+}
+
 static void csi_try_crop(struct csi_priv *priv,
 			 struct v4l2_rect *crop,
 			 struct v4l2_subdev_pad_config *cfg,
@@ -1181,6 +1193,7 @@ static void csi_try_fmt(struct csi_priv *priv,
 			struct v4l2_subdev_pad_config *cfg,
 			struct v4l2_subdev_format *sdformat,
 			struct v4l2_rect *crop,
+			struct v4l2_rect *compose,
 			const struct imx_media_pixfmt **cc)
 {
 	const struct imx_media_pixfmt *incc;
@@ -1195,15 +1208,8 @@ static void csi_try_fmt(struct csi_priv *priv,
 		incc = imx_media_find_mbus_format(infmt->code,
 						  CS_SEL_ANY, true);
 
-		if (sdformat->format.width < crop->width * 3 / 4)
-			sdformat->format.width = crop->width / 2;
-		else
-			sdformat->format.width = crop->width;
-
-		if (sdformat->format.height < crop->height * 3 / 4)
-			sdformat->format.height = crop->height / 2;
-		else
-			sdformat->format.height = crop->height;
+		sdformat->format.width = compose->width;
+		sdformat->format.height = compose->height;
 
 		if (incc->bayer) {
 			sdformat->format.code = infmt->code;
@@ -1239,11 +1245,17 @@ static void csi_try_fmt(struct csi_priv *priv,
 		v4l_bound_align_image(&sdformat->format.width, MIN_W, MAX_W,
 				      W_ALIGN, &sdformat->format.height,
 				      MIN_H, MAX_H, H_ALIGN, S_ALIGN);
+
+		/* Reset crop and compose rectangles */
 		crop->left = 0;
 		crop->top = 0;
 		crop->width = sdformat->format.width;
 		crop->height = sdformat->format.height;
 		csi_try_crop(priv, crop, cfg, &sdformat->format, sensor);
+		compose->left = 0;
+		compose->top = 0;
+		compose->width = crop->width;
+		compose->height = crop->height;
 
 		*cc = imx_media_find_mbus_format(sdformat->format.code,
 						 CS_SEL_ANY, true);
@@ -1268,7 +1280,7 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
 	struct imx_media_subdev *sensor;
 	struct v4l2_pix_format vdev_fmt;
 	struct v4l2_mbus_framefmt *fmt;
-	struct v4l2_rect *crop;
+	struct v4l2_rect *crop, *compose;
 	int ret = 0;
 
 	if (sdformat->pad >= CSI_NUM_PADS)
@@ -1288,8 +1300,9 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
 	}
 
 	crop = __csi_get_crop(priv, cfg, sdformat->which);
+	compose = __csi_get_compose(priv, cfg, sdformat->which);
 
-	csi_try_fmt(priv, sensor, cfg, sdformat, crop, &cc);
+	csi_try_fmt(priv, sensor, cfg, sdformat, crop, compose, &cc);
 
 	fmt = __csi_get_fmt(priv, cfg, sdformat->pad, sdformat->which);
 	*fmt = sdformat->format;
@@ -1306,7 +1319,8 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
 			format.pad = pad;
 			format.which = sdformat->which;
 			format.format = sdformat->format;
-			csi_try_fmt(priv, sensor, cfg, &format, crop, &outcc);
+			csi_try_fmt(priv, sensor, cfg, &format, NULL, compose,
+				    &outcc);
 
 			outfmt = __csi_get_fmt(priv, cfg, pad, sdformat->which);
 			*outfmt = format.format;
@@ -1340,16 +1354,17 @@ static int csi_get_selection(struct v4l2_subdev *sd,
 {
 	struct csi_priv *priv = v4l2_get_subdevdata(sd);
 	struct v4l2_mbus_framefmt *infmt;
-	struct v4l2_rect *crop;
+	struct v4l2_rect *crop, *compose;
 	int ret = 0;
 
-	if (sel->pad >= CSI_NUM_PADS || sel->pad == CSI_SINK_PAD)
+	if (sel->pad != CSI_SINK_PAD)
 		return -EINVAL;
 
 	mutex_lock(&priv->lock);
 
 	infmt = __csi_get_fmt(priv, cfg, CSI_SINK_PAD, sel->which);
 	crop = __csi_get_crop(priv, cfg, sel->which);
+	compose = __csi_get_compose(priv, cfg, sel->which);
 
 	switch (sel->target) {
 	case V4L2_SEL_TGT_CROP_BOUNDS:
@@ -1361,6 +1376,15 @@ static int csi_get_selection(struct v4l2_subdev *sd,
 	case V4L2_SEL_TGT_CROP:
 		sel->r = *crop;
 		break;
+	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+		sel->r.left = 0;
+		sel->r.top = 0;
+		sel->r.width = crop->width;
+		sel->r.height = crop->height;
+		break;
+	case V4L2_SEL_TGT_COMPOSE:
+		sel->r = *compose;
+		break;
 	default:
 		ret = -EINVAL;
 	}
@@ -1369,19 +1393,34 @@ static int csi_get_selection(struct v4l2_subdev *sd,
 	return ret;
 }
 
+static int csi_set_scale(u32 *compose, u32 crop, u32 flags)
+{
+	if ((flags & (V4L2_SEL_FLAG_LE | V4L2_SEL_FLAG_GE)) ==
+		     (V4L2_SEL_FLAG_LE | V4L2_SEL_FLAG_GE) &&
+	    *compose != crop && *compose != crop / 2)
+		return -ERANGE;
+
+	if (*compose <= crop / 2 ||
+	    (*compose < crop * 3 / 4 && !(flags & V4L2_SEL_FLAG_GE)) ||
+	    (*compose < crop && (flags & V4L2_SEL_FLAG_LE)))
+		*compose = crop / 2;
+	else
+		*compose = crop;
+
+	return 0;
+}
+
 static int csi_set_selection(struct v4l2_subdev *sd,
 			     struct v4l2_subdev_pad_config *cfg,
 			     struct v4l2_subdev_selection *sel)
 {
 	struct csi_priv *priv = v4l2_get_subdevdata(sd);
 	struct v4l2_mbus_framefmt *infmt;
+	struct v4l2_rect *crop, *compose;
 	struct imx_media_subdev *sensor;
-	struct v4l2_rect *crop;
 	int pad, ret = 0;
 
-	if (sel->pad >= CSI_NUM_PADS ||
-	    sel->pad == CSI_SINK_PAD ||
-	    sel->target != V4L2_SEL_TGT_CROP)
+	if (sel->pad != CSI_SINK_PAD)
 		return -EINVAL;
 
 	sensor = imx_media_find_sensor(priv->md, &priv->sd.entity);
@@ -1399,30 +1438,66 @@ static int csi_set_selection(struct v4l2_subdev *sd,
 
 	infmt = __csi_get_fmt(priv, cfg, CSI_SINK_PAD, sel->which);
 	crop = __csi_get_crop(priv, cfg, sel->which);
+	compose = __csi_get_compose(priv, cfg, sel->which);
 
-	/*
-	 * Modifying the crop rectangle always changes the format on the source
-	 * pad. If the KEEP_CONFIG flag is set, just return the current crop
-	 * rectangle.
-	 */
-	if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
-		sel->r = priv->crop;
-		if (sel->which == V4L2_SUBDEV_FORMAT_TRY)
-			*crop = sel->r;
-		goto out;
-	}
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP:
+		/*
+		 * Modifying the crop rectangle always changes the format on
+		 * the source pads. If the KEEP_CONFIG flag is set, just return
+		 * the current crop rectangle.
+		 */
+		if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
+			sel->r = priv->crop;
+			if (sel->which == V4L2_SUBDEV_FORMAT_TRY)
+				*crop = sel->r;
+			goto out;
+		}
+
+		csi_try_crop(priv, &sel->r, cfg, infmt, sensor);
+
+		*crop = sel->r;
+
+		/* Reset scaling to 1:1 */
+		compose->width = crop->width;
+		compose->height = crop->height;
+		break;
+	case V4L2_SEL_TGT_COMPOSE:
+		/*
+		 * Modifying the compose rectangle always changes the format on
+		 * the source pads. If the KEEP_CONFIG flag is set, just return
+		 * the current compose rectangle.
+		 */
+		if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
+			sel->r = priv->compose;
+			if (sel->which == V4L2_SUBDEV_FORMAT_TRY)
+				*compose = sel->r;
+			goto out;
+		}
 
-	csi_try_crop(priv, &sel->r, cfg, infmt, sensor);
+		sel->r.left = 0;
+		sel->r.top = 0;
+		ret = csi_set_scale(&sel->r.width, crop->width, sel->flags);
+		if (ret)
+			goto out;
+		ret = csi_set_scale(&sel->r.height, crop->height, sel->flags);
+		if (ret)
+			goto out;
 
-	*crop = sel->r;
+		*compose = sel->r;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out;
+	}
 
-	/* Update the source pad formats */
+	/* Reset source pads to sink compose rectangle */
 	for (pad = CSI_SINK_PAD + 1; pad < CSI_NUM_PADS; pad++) {
 		struct v4l2_mbus_framefmt *outfmt;
 
 		outfmt = __csi_get_fmt(priv, cfg, pad, sel->which);
-		outfmt->width = crop->width;
-		outfmt->height = crop->height;
+		outfmt->width = compose->width;
+		outfmt->height = compose->height;
 	}
 
 out:
@@ -1489,6 +1564,12 @@ static int csi_registered(struct v4l2_subdev *sd)
 	/* disable frame skipping */
 	priv->skip = &csi_skip[0];
 
+	/* init default crop and compose rectangle sizes */
+	priv->crop.width = 640;
+	priv->crop.height = 480;
+	priv->compose.width = 640;
+	priv->compose.height = 480;
+
 	priv->fim = imx_media_fim_init(&priv->sd);
 	if (IS_ERR(priv->fim)) {
 		ret = PTR_ERR(priv->fim);
-- 
2.7.4

  parent reply	other threads:[~2017-05-25  0:31 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-25  0:29 [PATCH v7 00/34] i.MX Media Driver Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 01/34] dt-bindings: Add bindings for video-multiplexer device Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 02/34] [media] dt-bindings: Add bindings for i.MX media driver Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 03/34] [media] dt/bindings: Add bindings for OV5640 Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 04/34] ARM: dts: imx6qdl: add multiplexer controls Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 05/34] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 06/34] ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 07/34] ARM: dts: imx6qdl: add capture-subsystem device Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 08/34] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 09/34] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 10/34] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 11/34] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 12/34] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 13/34] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 14/34] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 15/34] add mux and video interface bridge entity functions Steve Longerbeam
2017-05-29 13:37   ` Hans Verkuil
2017-05-29 13:51     ` Philipp Zabel
2017-05-29 13:52       ` Hans Verkuil
2017-05-25  0:29 ` [PATCH v7 16/34] [media] add Omnivision OV5640 sensor driver Steve Longerbeam
2017-05-29 13:39   ` Hans Verkuil
2017-05-29 15:55   ` Sakari Ailus
2017-05-29 21:50     ` Steve Longerbeam
2017-05-30  6:56       ` Sakari Ailus
2017-06-03 18:02         ` Steve Longerbeam
2017-06-04 18:00           ` Steve Longerbeam
2017-06-07 12:31             ` Sakari Ailus
2017-05-31 19:58   ` Pavel Machek
2017-06-01  8:26     ` Sakari Ailus
2017-06-01  8:43       ` exposure vs. exposure_absolute was " Pavel Machek
2017-06-03 19:38       ` Steve Longerbeam
2017-06-03 19:51         ` Pavel Machek
2017-06-03 21:57           ` Sakari Ailus
2017-06-03 22:17             ` Pavel Machek
2017-06-04  4:46             ` Steve Longerbeam
2017-06-07 12:31               ` Sakari Ailus
2017-05-25  0:29 ` [PATCH v7 17/34] platform: add video-multiplexer subdevice driver Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 18/34] platform: video-mux: include temporary mmio-mux support Steve Longerbeam
2017-05-25  7:51   ` [PATCH] platform: video-mux: fix ptr_ret.cocci warnings kbuild test robot
2017-05-25  7:51   ` [PATCH v7 18/34] platform: video-mux: include temporary mmio-mux support kbuild test robot
2017-05-25  0:29 ` [PATCH v7 19/34] media: Add userspace header file for i.MX Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 20/34] media: Add i.MX media core driver Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 21/34] media: imx: Add Capture Device Interface Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 22/34] media: imx: Add CSI subdev driver Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 23/34] media: imx: Add VDIC " Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 24/34] media: imx: Add IC subdev drivers Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 25/34] media: imx: Add MIPI CSI-2 Receiver subdev driver Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 26/34] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 27/34] media: imx: csi: add support for bayer formats Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 28/34] media: imx: csi: increase burst size for YUV formats Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 29/34] media: imx: csi: add frame skipping support Steve Longerbeam
2017-05-25  0:29 ` Steve Longerbeam [this message]
2017-05-25  0:29 ` [PATCH v7 31/34] media: imx: csi: add frame size/interval enumeration Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 32/34] media: imx: capture: add frame sizes/interval enumeration Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 33/34] media: imx: set and propagate default field, colorimetry Steve Longerbeam
2017-05-25  0:29 ` [PATCH v7 34/34] media: imx: Drop warning upon multiple S_STREAM disable calls Steve Longerbeam
2017-05-29 13:46 ` [PATCH v7 00/34] i.MX Media Driver Hans Verkuil
2017-05-29 14:15   ` Philipp Zabel
2017-05-29 14:21     ` Hans Verkuil
2017-05-29 15:24       ` Hans Verkuil
2017-05-29 15:36   ` Sakari Ailus
2017-05-29 16:29     ` Hans Verkuil
2017-05-29 18:12     ` Steve Longerbeam
2017-05-31 20:11       ` Pavel Machek
2017-05-29 17:23   ` Steve Longerbeam
2017-05-29 17:29     ` Hans Verkuil
2017-06-02  0:25 ` Tim Harvey
2017-06-02  0:43   ` Steve Longerbeam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495672189-29164-31-git-send-email-steve_longerbeam@mentor.com \
    --to=slongerbeam@gmail.com \
    --cc=andrew-ct.chen@mediatek.com \
    --cc=arnd@arndb.de \
    --cc=bparrot@ti.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=horms+renesas@verge.net.au \
    --cc=hverkuil@xs4all.nl \
    --cc=jean-christophe.trotin@st.com \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=markus.heiser@darmarIT.de \
    --cc=mchehab@kernel.org \
    --cc=minghsiu.tsai@mediatek.com \
    --cc=nick@shmanahar.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=p.zabel@pengutronix.de \
    --cc=pavel@ucw.cz \
    --cc=robert.jarzmik@free.fr \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=shawnguo@kernel.org \
    --cc=shuah@kernel.org \
    --cc=songjun.wu@microchip.com \
    --cc=sudipm.mukherjee@gmail.com \
    --cc=tiffany.lin@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®