From: Alexandre TORGUE <alexandre.torgue@st.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Patrice Chotard <patrice.chotard@st.com>,
Paul Gortmaker <paul.gortmaker@windriver.com>,
Rob Herring <robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>
Subject: [PATCH v2 1/3] pinctrl: stm32: set pin to gpio input when used as interrupt
Date: Mon, 29 May 2017 18:17:31 +0200 [thread overview]
Message-ID: <1496074653-2941-2-git-send-email-alexandre.torgue@st.com> (raw)
In-Reply-To: <1496074653-2941-1-git-send-email-alexandre.torgue@st.com>
This patch ensures that pin is correctly set as gpio input when it is used
as an interrupt.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index d3c5f5d..5a15c7d 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -219,12 +219,41 @@ static int stm32_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
.to_irq = stm32_gpio_to_irq,
};
+static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
+{
+ struct stm32_gpio_bank *bank = irq_data->domain->host_data;
+ struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
+ int ret;
+
+ ret = stm32_gpio_direction_input(&bank->gpio_chip, irq_data->hwirq);
+ if (ret)
+ return ret;
+
+ ret = gpiochip_lock_as_irq(&bank->gpio_chip, irq_data->hwirq);
+ if (ret) {
+ dev_err(pctl->dev, "unable to lock HW IRQ %lu for IRQ\n",
+ irq_data->hwirq);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void stm32_gpio_irq_release_resources(struct irq_data *irq_data)
+{
+ struct stm32_gpio_bank *bank = irq_data->domain->host_data;
+
+ gpiochip_unlock_as_irq(&bank->gpio_chip, irq_data->hwirq);
+}
+
static struct irq_chip stm32_gpio_irq_chip = {
.name = "stm32gpio",
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = irq_chip_mask_parent,
.irq_unmask = irq_chip_unmask_parent,
.irq_set_type = irq_chip_set_type_parent,
+ .irq_request_resources = stm32_gpio_irq_request_resources,
+ .irq_release_resources = stm32_gpio_irq_release_resources,
};
static int stm32_gpio_domain_translate(struct irq_domain *d,
@@ -248,15 +277,6 @@ static void stm32_gpio_domain_activate(struct irq_domain *d,
struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
regmap_field_write(pctl->irqmux[irq_data->hwirq], bank->bank_nr);
- gpiochip_lock_as_irq(&bank->gpio_chip, irq_data->hwirq);
-}
-
-static void stm32_gpio_domain_deactivate(struct irq_domain *d,
- struct irq_data *irq_data)
-{
- struct stm32_gpio_bank *bank = d->host_data;
-
- gpiochip_unlock_as_irq(&bank->gpio_chip, irq_data->hwirq);
}
static int stm32_gpio_domain_alloc(struct irq_domain *d,
@@ -285,7 +305,6 @@ static int stm32_gpio_domain_alloc(struct irq_domain *d,
.alloc = stm32_gpio_domain_alloc,
.free = irq_domain_free_irqs_common,
.activate = stm32_gpio_domain_activate,
- .deactivate = stm32_gpio_domain_deactivate,
};
/* Pinctrl functions */
--
1.9.1
next prev parent reply other threads:[~2017-05-29 16:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-29 16:17 [PATCH v2 0/3] Add fixes to STM32 pintrl Alexandre TORGUE
2017-05-29 16:17 ` Alexandre TORGUE [this message]
2017-05-31 0:05 ` [PATCH v2 1/3] pinctrl: stm32: set pin to gpio input when used as interrupt Linus Walleij
2017-05-29 16:17 ` [PATCH v2 2/3] pinctrl: stm32: Implement .get_direction gpio_chip callback Alexandre TORGUE
2017-05-31 0:06 ` Linus Walleij
2017-05-29 16:17 ` [PATCH v2 3/3] ARM: dts: stm32: Set gpio controller also as interrupt controller Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496074653-2941-2-git-send-email-alexandre.torgue@st.com \
--to=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=patrice.chotard@st.com \
--cc=paul.gortmaker@windriver.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®