mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
To: target-devel <target-devel@vger.kernel.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
	lkml <linux-kernel@vger.kernel.org>,
	Nicholas Bellinger <nab@linux-iscsi.org>,
	Christoph Hellwig <hch@lst.de>,
	Mike Christie <mchristi@redhat.com>,
	Hannes Reinecke <hare@suse.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Jens Axboe <axboe@fb.com>
Subject: [PATCH-v2] target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout
Date: Thu,  1 Jun 2017 07:05:02 +0000	[thread overview]
Message-ID: <1496300702-21835-1-git-send-email-nab@linux-iscsi.org> (raw)

From: Nicholas Bellinger <nab@linux-iscsi.org>

The people who are actively using iblock_execute_write_same_direct() are
doing so in the context of ESX VAAI BlockZero, together with
EXTENDED_COPY and COMPARE_AND_WRITE primitives.

In practice though I've not seen any users of IBLOCK WRITE_SAME for
anything other than VAAI BlockZero, so just using blkdev_issue_zeroout()
when available, and falling back to iblock_execute_write_same() if the
WRITE_SAME buffer contains anything other than zeros should be OK.

(Hook up max_write_zeroes_sectors to signal LBPRZ feature bit in
 target_configure_unmap_from_queue - nab)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
 drivers/target/target_core_device.c |  2 +-
 drivers/target/target_core_iblock.c | 44 +++++++++++++++++++++++--------------
 2 files changed, 28 insertions(+), 18 deletions(-)

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 8add07f38..a5762e6 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -851,7 +851,7 @@ bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
 	attrib->unmap_granularity = q->limits.discard_granularity / block_size;
 	attrib->unmap_granularity_alignment = q->limits.discard_alignment /
 								block_size;
-	attrib->unmap_zeroes_data = 0;
+	attrib->unmap_zeroes_data = (q->limits.max_write_zeroes_sectors);
 	return true;
 }
 EXPORT_SYMBOL(target_configure_unmap_from_queue);
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index bb069eb..b204413 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -86,6 +86,7 @@ static int iblock_configure_device(struct se_device *dev)
 	struct block_device *bd = NULL;
 	struct blk_integrity *bi;
 	fmode_t mode;
+	unsigned int max_write_zeroes_sectors;
 	int ret = -ENOMEM;
 
 	if (!(ib_dev->ibd_flags & IBDF_HAS_UDEV_PATH)) {
@@ -129,7 +130,11 @@ static int iblock_configure_device(struct se_device *dev)
 	 * Enable write same emulation for IBLOCK and use 0xFFFF as
 	 * the smaller WRITE_SAME(10) only has a two-byte block count.
 	 */
-	dev->dev_attrib.max_write_same_len = 0xFFFF;
+	max_write_zeroes_sectors = bdev_write_zeroes_sectors(bd);
+	if (max_write_zeroes_sectors)
+		dev->dev_attrib.max_write_same_len = max_write_zeroes_sectors;
+	else
+		dev->dev_attrib.max_write_same_len = 0xFFFF;
 
 	if (blk_queue_nonrot(q))
 		dev->dev_attrib.is_nonrot = 1;
@@ -415,28 +420,31 @@ static void iblock_end_io_flush(struct bio *bio)
 }
 
 static sense_reason_t
-iblock_execute_write_same_direct(struct block_device *bdev, struct se_cmd *cmd)
+iblock_execute_zero_out(struct block_device *bdev, struct se_cmd *cmd)
 {
 	struct se_device *dev = cmd->se_dev;
 	struct scatterlist *sg = &cmd->t_data_sg[0];
-	struct page *page = NULL;
-	int ret;
+	unsigned char *buf, zero = 0x00, *p = &zero;
+	int rc, ret;
 
-	if (sg->offset) {
-		page = alloc_page(GFP_KERNEL);
-		if (!page)
-			return TCM_OUT_OF_RESOURCES;
-		sg_copy_to_buffer(sg, cmd->t_data_nents, page_address(page),
-				  dev->dev_attrib.block_size);
-	}
+	buf = kmap(sg_page(sg)) + sg->offset;
+	if (!buf)
+		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+	/*
+	 * Fall back to block_execute_write_same() slow-path if
+	 * incoming WRITE_SAME payload does not contain zeros.
+	 */
+	rc = memcmp(buf, p, cmd->data_length);
+	kunmap(sg_page(sg));
+
+	if (rc)
+		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
-	ret = blkdev_issue_write_same(bdev,
+	ret = blkdev_issue_zeroout(bdev,
 				target_to_linux_sector(dev, cmd->t_task_lba),
 				target_to_linux_sector(dev,
 					sbc_get_write_same_sectors(cmd)),
-				GFP_KERNEL, page ? page : sg_page(sg));
-	if (page)
-		__free_page(page);
+				GFP_KERNEL, false);
 	if (ret)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
@@ -472,8 +480,10 @@ static void iblock_end_io_flush(struct bio *bio)
 		return TCM_INVALID_CDB_FIELD;
 	}
 
-	if (bdev_write_same(bdev))
-		return iblock_execute_write_same_direct(bdev, cmd);
+	if (bdev_write_zeroes_sectors(bdev)) {
+		if (!iblock_execute_zero_out(bdev, cmd))
+			return 0;
+	}
 
 	ibr = kzalloc(sizeof(struct iblock_req), GFP_KERNEL);
 	if (!ibr)
-- 
1.9.1

             reply	other threads:[~2017-06-01  7:02 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-01  7:05 Nicholas A. Bellinger [this message]
2017-06-03  0:39 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496300702-21835-1-git-send-email-nab@linux-iscsi.org \
    --to=nab@linux-iscsi.org \
    --cc=axboe@fb.com \
    --cc=hare@suse.com \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=mchristi@redhat.com \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®