From: Ran Wang <ran.wang_1@nxp.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: "Shawn Guo" <shawnguo@kernel.org>,
"Tang Yuantian" <Yuantian.Tang@nxp.com>,
"Horia Geantă" <horia.geanta@nxp.com>,
"Marc Zyngier" <marc.zyngier@arm.com>,
"Mihai Bantea" <mihai.bantea@nxp.com>,
"Jia Hongtao" <hongtao.jia@nxp.com>,
"Scott Wood" <oss@buserror.net>, "Liu Gang" <Gang.Liu@nxp.com>,
"York Sun" <york.sun@nxp.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM64 PORT (AARCH64 ARCHITECTURE)"
<linux-arm-kernel@lists.infradead.org>,
"open list" <linux-kernel@vger.kernel.org>,
"Ran Wang" <ran.wang_1@nxp.com>
Subject: [PATCH] arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
Date: Fri, 2 Jun 2017 10:30:00 +0800 [thread overview]
Message-ID: <1496370600-31442-1-git-send-email-ran.wang_1@nxp.com> (raw)
Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property
is used to disable rx detection in P3 PHY mode.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7e..9137280 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -567,6 +567,7 @@
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb1: usb@3000000 {
@@ -575,6 +576,7 @@
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
usb2: usb@3100000 {
@@ -583,6 +585,7 @@
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
sata: sata@3200000 {
--
2.1.0.27.g96db324
next reply other threads:[~2017-06-02 2:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-02 2:30 Ran Wang [this message]
2017-07-05 3:15 ` Ran Wang
2017-07-11 1:55 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496370600-31442-1-git-send-email-ran.wang_1@nxp.com \
--to=ran.wang_1@nxp.com \
--cc=Gang.Liu@nxp.com \
--cc=Yuantian.Tang@nxp.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=hongtao.jia@nxp.com \
--cc=horia.geanta@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=mihai.bantea@nxp.com \
--cc=oss@buserror.net \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
--cc=york.sun@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome