From: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
To: target-devel <target-devel@vger.kernel.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>,
Nicholas Bellinger <nab@linux-iscsi.org>,
Mike Christie <mchristi@redhat.com>,
Hannes Reinecke <hare@suse.de>, Christoph Hellwig <hch@lst.de>,
Himanshu Madhani <himanshu.madhani@qlogic.com>,
Sagi Grimberg <sagig@mellanox.com>
Subject: [PATCH] target: Fix kref->refcount underflow in transport_cmd_finish_abort
Date: Sat, 3 Jun 2017 21:09:04 +0000 [thread overview]
Message-ID: <1496524144-25580-1-git-send-email-nab@linux-iscsi.org> (raw)
From: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().
Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:
[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51
Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.
To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
drivers/target/target_core_internal.h | 2 +-
drivers/target/target_core_tmr.c | 16 ++++++++--------
drivers/target/target_core_transport.c | 9 ++++++---
3 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h
index 9ab7090..0912de7 100644
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -136,7 +136,7 @@ struct se_node_acl *core_tpg_add_initiator_node_acl(struct se_portal_group *tpg,
void release_se_kmem_caches(void);
u32 scsi_get_new_index(scsi_index_t);
void transport_subsystem_check_init(void);
-void transport_cmd_finish_abort(struct se_cmd *, int);
+int transport_cmd_finish_abort(struct se_cmd *, int);
unsigned char *transport_dump_cmd_direction(struct se_cmd *);
void transport_dump_dev_state(struct se_device *, char *, int *);
void transport_dump_dev_info(struct se_device *, struct se_lun *,
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index dce1e1b..13f47bf 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -75,7 +75,7 @@ void core_tmr_release_req(struct se_tmr_req *tmr)
kfree(tmr);
}
-static void core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
+static int core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
{
unsigned long flags;
bool remove = true, send_tas;
@@ -91,7 +91,7 @@ static void core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
transport_send_task_abort(cmd);
}
- transport_cmd_finish_abort(cmd, remove);
+ return transport_cmd_finish_abort(cmd, remove);
}
static int target_check_cdb_and_preempt(struct list_head *list,
@@ -184,8 +184,8 @@ void core_tmr_abort_task(
cancel_work_sync(&se_cmd->work);
transport_wait_for_tasks(se_cmd);
- transport_cmd_finish_abort(se_cmd, true);
- target_put_sess_cmd(se_cmd);
+ if (!transport_cmd_finish_abort(se_cmd, true))
+ target_put_sess_cmd(se_cmd);
printk("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for"
" ref_tag: %llu\n", ref_tag);
@@ -281,8 +281,8 @@ static void core_tmr_drain_tmr_list(
cancel_work_sync(&cmd->work);
transport_wait_for_tasks(cmd);
- transport_cmd_finish_abort(cmd, 1);
- target_put_sess_cmd(cmd);
+ if (!transport_cmd_finish_abort(cmd, 1))
+ target_put_sess_cmd(cmd);
}
}
@@ -380,8 +380,8 @@ static void core_tmr_drain_state_list(
cancel_work_sync(&cmd->work);
transport_wait_for_tasks(cmd);
- core_tmr_handle_tas_abort(cmd, tas);
- target_put_sess_cmd(cmd);
+ if (!core_tmr_handle_tas_abort(cmd, tas))
+ target_put_sess_cmd(cmd);
}
}
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 6025935..f1b3a46 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -651,9 +651,10 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd)
percpu_ref_put(&lun->lun_ref);
}
-void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
+int transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
{
bool ack_kref = (cmd->se_cmd_flags & SCF_ACK_KREF);
+ int ret = 0;
if (cmd->se_cmd_flags & SCF_SE_LUN_CMD)
transport_lun_remove_cmd(cmd);
@@ -665,9 +666,11 @@ void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
cmd->se_tfo->aborted_task(cmd);
if (transport_cmd_check_stop_to_fabric(cmd))
- return;
+ return 1;
if (remove && ack_kref)
- transport_put_cmd(cmd);
+ ret = transport_put_cmd(cmd);
+
+ return ret;
}
static void target_complete_failure_work(struct work_struct *work)
--
1.9.1
next reply other threads:[~2017-06-03 21:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-03 21:09 Nicholas A. Bellinger [this message]
2017-06-09 5:29 ` Nicholas A. Bellinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496524144-25580-1-git-send-email-nab@linux-iscsi.org \
--to=nab@linux-iscsi.org \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=himanshu.madhani@qlogic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mchristi@redhat.com \
--cc=sagig@mellanox.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®