From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-mtd@lists.infradead.org
Cc: Enrico Jorns <ejo@pengutronix.de>,
Artem Bityutskiy <artem.bityutskiy@linux.intel.com>,
Dinh Nguyen <dinguyen@kernel.org>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Marek Vasut <marek.vasut@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Masami Hiramatsu <mhiramat@kernel.org>,
Chuanxiao Dong <chuanxiao.dong@intel.com>,
Jassi Brar <jaswinder.singh@linaro.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
linux-kernel@vger.kernel.org,
Brian Norris <computersforpeace@gmail.com>,
Richard Weinberger <richard@nod.at>
Subject: [PATCH v5 08/23] mtd: nand: denali: remove unneeded find_valid_banks()
Date: Wed, 7 Jun 2017 20:52:17 +0900 [thread overview]
Message-ID: <1496836352-8016-9-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1496836352-8016-1-git-send-email-yamada.masahiro@socionext.com>
The function find_valid_banks() issues the Read ID (0x90) command,
then compares the first byte (Manufacturer ID) of each bank with
the one of bank0.
This is equivalent to what nand_scan_ident() does. The number of
chips is detected there, so this is unneeded.
What is worse for find_valid_banks() is that, if multiple chips are
connected to INTEL_CE4100 platform, it crashes the kernel by BUG().
This is what we should avoid. This function is just harmful and
unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Newly added
drivers/mtd/nand/denali.c | 47 -----------------------------------------------
drivers/mtd/nand/denali.h | 1 -
2 files changed, 48 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 22acfc34b546..f090486cab66 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -338,51 +338,6 @@ static void get_samsung_nand_para(struct denali_nand_info *denali,
}
/*
- * determines how many NAND chips are connected to the controller. Note for
- * Intel CE4100 devices we don't support more than one device.
- */
-static void find_valid_banks(struct denali_nand_info *denali)
-{
- uint32_t id[denali->max_banks];
- int i;
-
- denali->total_used_banks = 1;
- for (i = 0; i < denali->max_banks; i++) {
- index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
- index_addr(denali, MODE_11 | (i << 24) | 1, 0);
- index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]);
-
- dev_dbg(denali->dev,
- "Return 1st ID for bank[%d]: %x\n", i, id[i]);
-
- if (i == 0) {
- if (!(id[i] & 0x0ff))
- break; /* WTF? */
- } else {
- if ((id[i] & 0x0ff) == (id[0] & 0x0ff))
- denali->total_used_banks++;
- else
- break;
- }
- }
-
- if (denali->platform == INTEL_CE4100) {
- /*
- * Platform limitations of the CE4100 device limit
- * users to a single chip solution for NAND.
- * Multichip support is not enabled.
- */
- if (denali->total_used_banks != 1) {
- dev_err(denali->dev,
- "Sorry, Intel CE4100 only supports a single NAND device.\n");
- BUG();
- }
- }
- dev_dbg(denali->dev,
- "denali->total_used_banks: %d\n", denali->total_used_banks);
-}
-
-/*
* Use the configuration feature register to determine the maximum number of
* banks that the hardware supports.
*/
@@ -439,8 +394,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
ioread32(denali->flash_reg + CS_SETUP_CNT));
- find_valid_banks(denali);
-
/*
* If the user specified to override the default timings
* with a specific ONFI mode, we apply those changes here.
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 352d8328b94a..0e4a8965f6f1 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -326,7 +326,6 @@ struct denali_nand_info {
int platform;
struct nand_buf buf;
struct device *dev;
- int total_used_banks;
int page;
void __iomem *flash_reg; /* Register Interface */
void __iomem *flash_mem; /* Host Data/Command Interface */
--
2.7.4
next prev parent reply other threads:[~2017-06-07 11:55 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-07 11:52 [PATCH v5 00/23] mtd: nand: denali: Denali NAND IP patch bomb Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 01/23] mtd: nand: add generic helpers to check, match, maximize ECC settings Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 02/23] mtd: nand: add a shorthand to generate nand_ecc_caps structure Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 03/23] mtd: nand: denali: avoid hard-coding ECC step, strength, bytes Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 04/23] mtd: nand: denali: remove Toshiba and Hynix specific fixup code Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 05/23] mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants Masahiro Yamada
2017-06-07 19:01 ` Rob Herring
2017-06-07 11:52 ` [PATCH v5 06/23] mtd: nand: denali: set NAND_ECC_CUSTOM_PAGE_ACCESS Masahiro Yamada
2017-06-07 13:26 ` Boris Brezillon
2017-06-08 7:32 ` Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 07/23] mtd: nand: denali: do not propagate NAND_STATUS_FAIL to waitfunc() Masahiro Yamada
2017-06-07 13:33 ` Boris Brezillon
2017-06-08 6:11 ` Masahiro Yamada
2017-06-08 7:05 ` Boris Brezillon
2017-06-08 9:43 ` Masahiro Yamada
2017-06-08 10:04 ` Boris Brezillon
2017-06-07 11:52 ` Masahiro Yamada [this message]
2017-06-07 11:52 ` [PATCH v5 09/23] mtd: nand: denali: handle timing parameters by setup_data_interface() Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 10/23] mtd: nand: denali: rework interrupt handling Masahiro Yamada
2017-06-07 13:57 ` Boris Brezillon
2017-06-08 6:10 ` Masahiro Yamada
2017-06-08 7:12 ` Boris Brezillon
2017-06-08 10:41 ` Masahiro Yamada
2017-06-08 11:26 ` Boris Brezillon
2017-06-08 12:58 ` Masahiro Yamada
2017-06-08 15:43 ` Boris Brezillon
2017-06-08 17:26 ` Masahiro Yamada
2017-06-08 17:30 ` Masahiro Yamada
2017-06-09 7:58 ` Boris Brezillon
2017-06-13 4:41 ` Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 11/23] mtd: nand: denali: fix NAND_CMD_STATUS handling Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 12/23] mtd: nand: denali: fix NAND_CMD_PARAM handling Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 13/23] mtd: nand: denali: switch over to cmd_ctrl instead of cmdfunc Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 14/23] mtd: nand: denali: fix bank reset function to detect the number of chips Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 15/23] mtd: nand: denali: use interrupt instead of polling for bank reset Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 16/23] mtd: nand: denali: propagate page to helpers via function argument Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 17/23] mtd: nand: denali: merge struct nand_buf into struct denali_nand_info Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 18/23] mtd: nand: denali: use flag instead of register macro for direction Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 19/23] mtd: nand: denali: fix raw and oob accessors for syndrome page layout Masahiro Yamada
2017-06-07 14:09 ` Boris Brezillon
2017-06-08 11:22 ` Masahiro Yamada
2017-06-13 4:42 ` Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 20/23] mtd: nand: denali: support hardware-assisted erased page detection Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 21/23] mtd: nand: denali: skip driver internal bounce buffer when possible Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 22/23] mtd: nand: denali: use non-managed kmalloc() for DMA buffer Masahiro Yamada
2017-06-07 11:52 ` [PATCH v5 23/23] mtd: nand: denali: enable bad block table scan Masahiro Yamada
2017-06-08 6:16 ` [PATCH v5 00/23] mtd: nand: denali: Denali NAND IP patch bomb Masahiro Yamada
2017-06-08 7:12 ` Masahiro Yamada
2017-06-08 7:18 ` Boris Brezillon
2017-06-11 20:14 ` Boris Brezillon
2017-06-08 7:14 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496836352-8016-9-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=boris.brezillon@free-electrons.com \
--cc=chuanxiao.dong@intel.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=dinguyen@kernel.org \
--cc=dwmw2@infradead.org \
--cc=ejo@pengutronix.de \
--cc=jaswinder.singh@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=mhiramat@kernel.org \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®