mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
To: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org,
	Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
	Vineet Gupta <Vineet.Gupta1@synopsys.com>,
	stable@vger.kernel.org
Subject: [PATCH] ARCv2: SLC: Make sure busy bit is set properly for region ops
Date: Fri,  7 Jul 2017 12:25:14 +0300	[thread overview]
Message-ID: <1499419514-13171-1-git-send-email-abrodkin@synopsys.com> (raw)

c70c473396cb "ARCv2: SLC: Make sure busy bit is set properly on SLC flushing"
fixes problem for entire SLC operation where the problem was initially
caught. But given a nature of the issue it is perfectly possible for
busy bit to be read incorrectly even when region operation was started.

So extending initial fix for regional operation as well.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: stable@vger.kernel.org
---
 arch/arc/mm/cache.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index bdb5227241cf..08427d572850 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -697,6 +697,8 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
 	write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
 	write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
 
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(ARC_REG_SLC_CTRL);
 	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
 
 	spin_unlock_irqrestore(&lock, flags);
-- 
2.7.5

                 reply	other threads:[~2017-07-07  9:25 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499419514-13171-1-git-send-email-abrodkin@synopsys.com \
    --to=alexey.brodkin@synopsys.com \
    --cc=Vineet.Gupta1@synopsys.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®