mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Petr Vandrovec" <VANDROVE@vc.cvut.cz>
To: linux-kernel@vger.kernel.org
Cc: pdh@colonel-panic.com, andre@linux-ide.org,
	sorisor@hell.wh8.tu-dresden.de
Subject: Re: VIA silent disk corruption - fixed for me
Date: Wed, 7 Feb 2001 13:22:13 MET-1	[thread overview]
Message-ID: <14CC8D943BE7@vcnet.vc.cvut.cz> (raw)

I wrote on 6 Feb evening CET:
> On  6 Feb 01 at 15:24, Udo A. Steinberg wrote:
> > 
> > > So for today I'm back on [UMS]DMA disabled. I'll try downgrading BIOS
> > > today, but it looks to me like that something is severely broken here.
> > 
> > Are your drives connected to the VIA or the Promise controller? Mine
> > are both connected to the PDC20265 and running in UDMA-100 mode. There
> > have been several threads on lkml about corruption on disks connected
> > to Via chipset IDE controllers, although I didn't follow them in great
> > detail. Maybe your problem is not related to the host bridge, but to
> > the IDE controller?
> 
> They are connected to Promise, I reserved VIA for CDROM drive.
> One HDD runs in UDMA5 mode, another in UDMA2. Corruption is often
> when I run md5sum in parallel on both HDDs - in that case almost
> no file generates same checksum which was generated using PIO4.
> When I run md5sum on only one HDD, there are about 4 checksum errors
> in 6GB of data. But I'm more and more inclined to throw this A7V away,
> as it is impossible to get datasheet from Promise, and for VIA host
> bridge I was just able to slow down normal system operation by factor
> of 3... but still with same corruption :-( Just if page could have
> 4092 and not 4096 bytes ;-)

After upgrading BIOS (it did not help) I decided to switch my secondary
harddisk to master. And voila - hde running UDMA5, hdg running UDMA2
(hdf/hdh does not exist), whole night stresstests, no corruption.

So at least for me it means that Promise Linux driver does not support
slave-only configuration. I did not checked whether master-slave pair
works, but master alone for sure works for me.

That is, for me problem was not in VIA bridge, but in PDC20265 driver...
                                            Best regards,
                                                Petr Vandrovec
                                                vandrove@vc.cvut.cz
                                                
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

             reply	other threads:[~2001-02-07 12:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-02-07 13:22 Petr Vandrovec [this message]
2001-02-07 14:31 ` Udo A. Steinberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14CC8D943BE7@vcnet.vc.cvut.cz \
    --to=vandrove@vc.cvut.cz \
    --cc=andre@linux-ide.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pdh@colonel-panic.com \
    --cc=sorisor@hell.wh8.tu-dresden.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®