Re: [Freedreno] [PATCH v2] drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy

[Abhinav Kumar <quic_abhinavk@quicinc.com>]

On 11/16/2023 12:36 PM, Abhinav Kumar wrote:
> 
> 
> On 11/9/2023 4:02 PM, Jonathan Marek wrote:
>> Use the same value as the downstream driver. This change is needed for 
>> CPHY
>> mode to work correctly.
>>
>> Fixes: 8b034e6771113 ("drm/msm/dsi: add support for DSI-PHY on SM8550")

One error here. We need 12 chars of SHA but you have 13 otherwise 
checkpatch cries

Fixes: 8b034e677111 ("drm/msm/dsi: add support for DSI-PHY on SM8550")

Will fix this up while applying.

>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>> ---
>> v2: fixed the Fixes: line
>>
>>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> Good catch !
> 
> LGTM
> 
> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> 
>> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c 
>> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> index 3b1ed02f644d..89a6344bc865 100644
>> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> @@ -918,7 +918,7 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy 
>> *phy,
>>       if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
>>           if (phy->cphy_mode) {
>>               vreg_ctrl_0 = 0x45;
>> -            vreg_ctrl_1 = 0x45;
>> +            vreg_ctrl_1 = 0x41;
>>               glbl_rescode_top_ctrl = 0x00;
>>               glbl_rescode_bot_ctrl = 0x00;
>>           } else {