Re: [PATCH] [media] s5p-jpeg: fix recursive spinlock acquisition

[Jacek Anaszewski <jacek.anaszewski@gmail.com>]

Hi Alexandre,

Thanks for the patch.

On 04/25/2017 08:19 AM, Alexandre Courbot wrote:
> v4l2_m2m_job_finish(), which is called from the interrupt handler with
> slock acquired, can call the device_run() hook immediately if another
> context was in the queue. This hook also acquires slock, resulting in
> a deadlock for this scenario.
> 
> Fix this by releasing slock right before calling v4l2_m2m_job_finish().
> This is safe to do as the state of the hardware cannot change before
> v4l2_m2m_job_finish() is called anyway.
> 
> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
> ---
>  drivers/media/platform/s5p-jpeg/jpeg-core.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> index 52dc7941db65..223b4379929e 100644
> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> @@ -2642,13 +2642,13 @@ static irqreturn_t s5p_jpeg_irq(int irq, void *dev_id)
>  	if (curr_ctx->mode == S5P_JPEG_ENCODE)
>  		vb2_set_plane_payload(&dst_buf->vb2_buf, 0, payload_size);
>  	v4l2_m2m_buf_done(dst_buf, state);
> -	v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->fh.m2m_ctx);
>  
>  	curr_ctx->subsampling = s5p_jpeg_get_subsampling_mode(jpeg->regs);
>  	spin_unlock(&jpeg->slock);
>  
>  	s5p_jpeg_clear_int(jpeg->regs);
>  
> +	v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->fh.m2m_ctx);
>  	return IRQ_HANDLED;
>  }
>  
> @@ -2707,11 +2707,12 @@ static irqreturn_t exynos4_jpeg_irq(int irq, void *priv)
>  		v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_ERROR);
>  	}
>  
> -	v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->fh.m2m_ctx);
>  	if (jpeg->variant->version == SJPEG_EXYNOS4)
>  		curr_ctx->subsampling = exynos4_jpeg_get_frame_fmt(jpeg->regs);
>  
>  	spin_unlock(&jpeg->slock);
> +
> +	v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->fh.m2m_ctx);
>  	return IRQ_HANDLED;
>  }
>  
> @@ -2770,10 +2771,15 @@ static irqreturn_t exynos3250_jpeg_irq(int irq, void *dev_id)
>  	if (curr_ctx->mode == S5P_JPEG_ENCODE)
>  		vb2_set_plane_payload(&dst_buf->vb2_buf, 0, payload_size);
>  	v4l2_m2m_buf_done(dst_buf, state);
> -	v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->fh.m2m_ctx);
>  
>  	curr_ctx->subsampling =
>  			exynos3250_jpeg_get_subsampling_mode(jpeg->regs);
> +
> +	spin_unlock(&jpeg->slock);
> +
> +	v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->fh.m2m_ctx);
> +	return IRQ_HANDLED;
> +
>  exit_unlock:
>  	spin_unlock(&jpeg->slock);
>  	return IRQ_HANDLED;
> 

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Just out of curiosity - could you share how you discovered the problem -
by some static checkers or trying to use the driver?

-- 
Best regards,
Jacek Anaszewski