mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Slark Xiao" <slark_xiao@163.com>
To: "Johan Hovold" <johan@kernel.org>
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re:Re: Re: [PATCH] USB: serial: option: add support for DW5829e
Date: Mon, 21 Feb 2022 17:20:05 +0800 (CST)	[thread overview]
Message-ID: <14f5bdc0.3675.17f1b94b947.Coremail.slark_xiao@163.com> (raw)
In-Reply-To: <YhNWV5lXm0d7lyfL@hovoldconsulting.com>

















At 2022-02-21 17:07:35, "Johan Hovold" <johan@kernel.org> wrote:
>On Thu, Feb 10, 2022 at 11:27:45AM +0800, Slark Xiao wrote:
>> At 2022-02-09 22:27:01, "Johan Hovold" <johan@kernel.org> wrote:
>> >On Wed, Feb 09, 2022 at 11:15:35AM +0800, Slark Xiao wrote:
>
>> >> DW5829e RMNET mode:
>> >> T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
>> >> D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
>> >> P:  Vendor=413c ProdID=81e6 Rev=03.18
>> >> S:  Manufacturer=Dell Inc.
>> >> S:  Product=DW5829e Snapdragon X20 LTE
>> >> S:  SerialNumber=0123456789ABCDEF
>> >> C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
>> >> I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
>> >> I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
>> >> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>> >> I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>> >> I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>> >> I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
>
>> >> DW5829e-eSIM RMNET mode:
>> >> T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
>> >> D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
>> >> P:  Vendor=413c ProdID=81e4 Rev=03.18
>> >> S:  Manufacturer=Dell Inc.
>> >> S:  Product=DW5829e-eSIM Snapdragon X20 LTE
>> >> S:  SerialNumber=0123456789ABCDEF
>> >> C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
>> >> I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
>> >> I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
>> >> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>> >> I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>> >> I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>> >> I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
>
>> >>  #define KYOCERA_VENDOR_ID			0x0c88
>> >>  #define KYOCERA_PRODUCT_KPC650			0x17da
>> >> @@ -1063,6 +1065,10 @@ static const struct usb_device_id option_ids[] = {
>> >>  	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
>> >>  	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM),
>> >>  	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
>> >> +	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_5829E, 0xff),
>> >> +	  .driver_info = RSVD(6) },
>> >> +	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM, 0xff),
>> >> +	  .driver_info = RSVD(6) },
>> >
>> >It looks like these entries will cause the driver to bind also to the
>> >QMI port however.
>> >
>
>> Actually not,  currently RMNET port would load the qmi_wwan driver
>> successfully even the class of QMI is also 0xff.
>
>That's not guaranteed so RMNET mode could break depending on probe
>order with the above entries.
>
>> Do you mean I should add RSVD(0) to reduce confusion?
>
>You need to reserve it for correctness (or restructure the entries in
>some other way to achieve the same result).
> 
Yes, so I re-send a V2 version to reserve interface 0,1,6. Please help take a look on that.
Thanks.
>> >>  	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
>> >>  	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
>> >>  	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
>
>Johan

  reply	other threads:[~2022-02-21  9:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-09  3:15 Slark Xiao
2022-02-09 14:27 ` Johan Hovold
2022-02-10  3:27   ` Slark Xiao
2022-02-21  9:07     ` Johan Hovold
2022-02-21  9:20       ` Slark Xiao [this message]
2022-02-21  9:43         ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14f5bdc0.3675.17f1b94b947.Coremail.slark_xiao@163.com \
    --to=slark_xiao@163.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®