From: Donet Tom <donettom@linux.ibm.com>
To: Madhavan Srinivasan <maddy@linux.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>,
Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ritesh Harjani <ritesh.list@gmail.com>,
Hari Bathini <hbathini@linux.ibm.com>,
linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org (open list),
Donet Tom <donettom@linux.ibm.com>
Subject: [PATCH for-next 2/2] book3s64/radix : Optimize vmemmap start alignment
Date: Sat, 3 May 2025 12:31:59 +0530 [thread overview]
Message-ID: <14f9b6ef72fa689f3a4d44dfa67d2279bdfd28a6.1746255312.git.donettom@linux.ibm.com> (raw)
In-Reply-To: <e876a700a4caa5610e994b946b84f71d0fe6f919.1746255312.git.donettom@linux.ibm.com>
If we always align the vmemmap start to PAGE_SIZE, there is a
chance that we may end up allocating page-sized vmemmap backing
pages in RAM in the altmap not present case, because a PAGE_SIZE
aligned address is not PMD_SIZE-aligned.
In this patch, we are aligning the vmemmap start address to
PMD_SIZE if altmap is not present. This ensures that a PMD_SIZE
page is always allocated for the vmemmap mapping if altmap is
not present.
If altmap is present, Make sure we align the start vmemmap addr to
PAGE_SIZE so that we calculate the correct start_pfn in altmap
boundary check to decide whether we should use altmap or RAM based
backing memory allocation. Also the address need to be aligned for
set_pte operation. If the start addr is already PMD_SIZE aligned
and with in the altmap boundary then we will try to use a pmd size
altmap mapping else we go for page size mapping.
So if altmap is present, we try to use the maximum number of
altmap pages; otherwise, we allocate a PMD_SIZE RAM page.
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
---
arch/powerpc/mm/book3s64/radix_pgtable.c | 29 +++++++++++++++---------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 3d67aee8c8ca..c630cece8ed4 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -1122,18 +1122,25 @@ int __meminit radix__vmemmap_populate(unsigned long start, unsigned long end, in
pte_t *pte;
/*
- * Make sure we align the start vmemmap addr so that we calculate
- * the correct start_pfn in altmap boundary check to decided whether
- * we should use altmap or RAM based backing memory allocation. Also
- * the address need to be aligned for set_pte operation.
-
- * If the start addr is already PMD_SIZE aligned we will try to use
- * a pmd mapping. We don't want to be too aggressive here beacause
- * that will cause more allocations in RAM. So only if the namespace
- * vmemmap start addr is PMD_SIZE aligned we will use PMD mapping.
+ * If altmap is present, Make sure we align the start vmemmap addr
+ * to PAGE_SIZE so that we calculate the correct start_pfn in
+ * altmap boundary check to decide whether we should use altmap or
+ * RAM based backing memory allocation. Also the address need to be
+ * aligned for set_pte operation. If the start addr is already
+ * PMD_SIZE aligned and with in the altmap boundary then we will
+ * try to use a pmd size altmap mapping else we go for page size
+ * mapping.
+ *
+ * If altmap is not present, align the vmemmap addr to PMD_SIZE and
+ * always allocate a PMD size page for vmemmap backing.
+ *
*/
- start = ALIGN_DOWN(start, PAGE_SIZE);
+ if (altmap)
+ start = ALIGN_DOWN(start, PAGE_SIZE);
+ else
+ start = ALIGN_DOWN(start, PMD_SIZE);
+
for (addr = start; addr < end; addr = next) {
next = pmd_addr_end(addr, end);
@@ -1159,7 +1166,7 @@ int __meminit radix__vmemmap_populate(unsigned long start, unsigned long end, in
* in altmap block allocation failures, in which case
* we fallback to RAM for vmemmap allocation.
*/
- if (!IS_ALIGNED(addr, PMD_SIZE) || (altmap &&
+ if (altmap && (!IS_ALIGNED(addr, PMD_SIZE) ||
altmap_cross_boundary(altmap, addr, PMD_SIZE))) {
/*
* make sure we don't create altmap mappings
--
2.48.1
next prev parent reply other threads:[~2025-05-03 7:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-03 7:01 [PATCH for-next 1/2] book3s64/radix : Handle error conditions properly in radix_vmemmap_populate Donet Tom
2025-05-03 7:01 ` Donet Tom [this message]
2025-05-05 7:36 ` Ritesh Harjani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=14f9b6ef72fa689f3a4d44dfa67d2279bdfd28a6.1746255312.git.donettom@linux.ibm.com \
--to=donettom@linux.ibm.com \
--cc=christophe.leroy@csgroup.eu \
--cc=hbathini@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=ritesh.list@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®