mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chris Zhong <zyw@rock-chips.com>
To: seanpaul@chromium.org, dianders@chromium.org, briannorris@chromium.org
Cc: linux-rockchip@lists.infradead.org, mark.yao@rock-chips.com,
	heiko@sntech.de, Chris Zhong <zyw@rock-chips.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Shashank Sharma <shashank.sharma@intel.com>,
	Jose Abreu <joabreu@synopsys.com>,
	Jani Nikula <jani.nikula@intel.com>,
	Thierry Reding <treding@nvidia.com>,
	linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] video/hdmi: Introduce helpers for the HDMI audio infoframe payload
Date: Tue, 18 Jul 2017 19:20:41 +0800	[thread overview]
Message-ID: <1500376842-6739-1-git-send-email-zyw@rock-chips.com> (raw)

The DP is using the same audio infoframe payload as hdmi, per DP 1.3
spec, but it has a different header. Provide a new interface here,
it just packs the payload.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/video/hdmi.c | 66 ++++++++++++++++++++++++++++++++++++++--------------
 include/linux/hdmi.h |  3 ++-
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 1cf907e..e0b041e 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -240,6 +240,49 @@ int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame)
 EXPORT_SYMBOL(hdmi_audio_infoframe_init);
 
 /**
+ * hdmi_audio_infoframe_pack_payload() - write HDMI audio infoframe payload to
+ * binary buffer
+ * @frame: HDMI audio infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Packs the information contained in the @frame structure into a binary
+ * representation that can be written into the corresponding controller
+ * registers.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+ssize_t hdmi_audio_infoframe_pack_payload(struct hdmi_audio_infoframe *frame,
+					  void *buffer, size_t size)
+{
+	unsigned char channels;
+	u8 *ptr = buffer;
+
+	if (size < frame->length)
+		return -ENOSPC;
+
+	memset(buffer, 0, size);
+
+	if (frame->channels >= 2)
+		channels = frame->channels - 1;
+	else
+		channels = 0;
+
+	ptr[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
+	ptr[1] = ((frame->sample_frequency & 0x7) << 2) |
+		 (frame->sample_size & 0x3);
+	ptr[2] = frame->coding_type_ext & 0x1f;
+	ptr[3] = frame->channel_allocation;
+	ptr[4] = (frame->level_shift_value & 0xf) << 3;
+
+	if (frame->downmix_inhibit)
+		ptr[4] |= BIT(7);
+
+	return 0;
+}
+EXPORT_SYMBOL(hdmi_audio_infoframe_pack_payload);
+
+/**
  * hdmi_audio_infoframe_pack() - write HDMI audio infoframe to binary buffer
  * @frame: HDMI audio infoframe
  * @buffer: destination buffer
@@ -256,22 +299,15 @@ EXPORT_SYMBOL(hdmi_audio_infoframe_init);
 ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 				  void *buffer, size_t size)
 {
-	unsigned char channels;
 	u8 *ptr = buffer;
 	size_t length;
+	int ret;
 
 	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
 
 	if (size < length)
 		return -ENOSPC;
 
-	memset(buffer, 0, size);
-
-	if (frame->channels >= 2)
-		channels = frame->channels - 1;
-	else
-		channels = 0;
-
 	ptr[0] = frame->type;
 	ptr[1] = frame->version;
 	ptr[2] = frame->length;
@@ -279,16 +315,10 @@ ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 
 	/* start infoframe payload */
 	ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
-	ptr[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
-	ptr[1] = ((frame->sample_frequency & 0x7) << 2) |
-		 (frame->sample_size & 0x3);
-	ptr[2] = frame->coding_type_ext & 0x1f;
-	ptr[3] = frame->channel_allocation;
-	ptr[4] = (frame->level_shift_value & 0xf) << 3;
-
-	if (frame->downmix_inhibit)
-		ptr[4] |= BIT(7);
+	ret = hdmi_audio_infoframe_pack_payload(frame, ptr,
+					size - HDMI_INFOFRAME_HEADER_SIZE);
+	if (ret)
+		return ret;
 
 	hdmi_infoframe_set_checksum(buffer, length);
 
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index d271ff2..d93c709 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -272,7 +272,8 @@ struct hdmi_audio_infoframe {
 int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame);
 ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
 				  void *buffer, size_t size);
-
+ssize_t hdmi_audio_infoframe_pack_payload(struct hdmi_audio_infoframe *frame,
+					  void *buffer, size_t size);
 enum hdmi_3d_structure {
 	HDMI_3D_STRUCTURE_INVALID = -1,
 	HDMI_3D_STRUCTURE_FRAME_PACKING = 0,
-- 
2.7.4

             reply	other threads:[~2017-07-18 11:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-18 11:20 Chris Zhong [this message]
2017-07-18 11:20 ` [PATCH v2 2/2] drm/rockchip: cdn-dp: send audio infoframe to sink Chris Zhong
2017-07-18 15:16 ` [PATCH v2 1/2] video/hdmi: Introduce helpers for the HDMI audio infoframe payload Doug Anderson
2017-07-19  0:49   ` Chris Zhong
2017-07-19 17:27     ` Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1500376842-6739-1-git-send-email-zyw@rock-chips.com \
    --to=zyw@rock-chips.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=briannorris@chromium.org \
    --cc=dianders@chromium.org \
    --cc=heiko@sntech.de \
    --cc=jani.nikula@intel.com \
    --cc=joabreu@synopsys.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.yao@rock-chips.com \
    --cc=seanpaul@chromium.org \
    --cc=shashank.sharma@intel.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®