From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-mmc@vger.kernel.org
Cc: Piotr Sroka <piotrs@cadence.com>,
Adrian Hunter <adrian.hunter@intel.com>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Al Cooper <alcooperx@gmail.com>,
linux-kernel@vger.kernel.org,
Brian Norris <computersforpeace@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Barry Song <baohua@kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Gregory Fong <gregory.0xf0@gmail.com>,
linux-arm-kernel@lists.infradead.org,
Ulf Hansson <ulf.hansson@linaro.org>
Subject: [PATCH 1/3] mmc: sdhci: enable/disable the clock in sdhci_pltfm_suspend/resume
Date: Mon, 31 Jul 2017 21:56:47 +0900 [thread overview]
Message-ID: <1501505809-393-2-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1501505809-393-1-git-send-email-yamada.masahiro@socionext.com>
This commit provides similar cleanups as commit 83eacdfa2529 ("mmc:
sdhci: disable the clock in sdhci_pltfm_unregister()") did for
unregister hooks.
Some drivers duplicate code to handle pltfm_host->clk in their own
hooks. The clock can be handled in sdhci_pltfm.c so that drivers
can reuse sdhci_pltfm_pmops.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
drivers/mmc/host/sdhci-brcmstb.c | 37 +------------------------------------
drivers/mmc/host/sdhci-pltfm.c | 16 +++++++++++++++-
drivers/mmc/host/sdhci-sirf.c | 39 +--------------------------------------
3 files changed, 17 insertions(+), 75 deletions(-)
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index e2f638338e8f..6d461fcdd663 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -21,41 +21,6 @@
#include "sdhci-pltfm.h"
-#ifdef CONFIG_PM_SLEEP
-
-static int sdhci_brcmstb_suspend(struct device *dev)
-{
- struct sdhci_host *host = dev_get_drvdata(dev);
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- int res;
-
- if (host->tuning_mode != SDHCI_TUNING_MODE_3)
- mmc_retune_needed(host->mmc);
-
- res = sdhci_suspend_host(host);
- if (res)
- return res;
- clk_disable_unprepare(pltfm_host->clk);
- return res;
-}
-
-static int sdhci_brcmstb_resume(struct device *dev)
-{
- struct sdhci_host *host = dev_get_drvdata(dev);
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- int err;
-
- err = clk_prepare_enable(pltfm_host->clk);
- if (err)
- return err;
- return sdhci_resume_host(host);
-}
-
-#endif /* CONFIG_PM_SLEEP */
-
-static SIMPLE_DEV_PM_OPS(sdhci_brcmstb_pmops, sdhci_brcmstb_suspend,
- sdhci_brcmstb_resume);
-
static const struct sdhci_ops sdhci_brcmstb_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
@@ -131,7 +96,7 @@ MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
static struct platform_driver sdhci_brcmstb_driver = {
.driver = {
.name = "sdhci-brcmstb",
- .pm = &sdhci_brcmstb_pmops,
+ .pm = &sdhci_pltfm_pmops,
.of_match_table = of_match_ptr(sdhci_brcm_of_match),
},
.probe = sdhci_brcmstb_probe,
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index e090d8c42ddb..be9a79d62e22 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -212,16 +212,30 @@ EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister);
static int sdhci_pltfm_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ int ret;
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
mmc_retune_needed(host->mmc);
- return sdhci_suspend_host(host);
+ ret = sdhci_suspend_host(host);
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(pltfm_host->clk);
+
+ return 0;
}
static int sdhci_pltfm_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ int ret;
+
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret)
+ return ret;
return sdhci_resume_host(host);
}
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
index c251c6c0a112..dd4680a0ada4 100644
--- a/drivers/mmc/host/sdhci-sirf.c
+++ b/drivers/mmc/host/sdhci-sirf.c
@@ -230,43 +230,6 @@ static int sdhci_sirf_probe(struct platform_device *pdev)
return ret;
}
-#ifdef CONFIG_PM_SLEEP
-static int sdhci_sirf_suspend(struct device *dev)
-{
- struct sdhci_host *host = dev_get_drvdata(dev);
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- int ret;
-
- if (host->tuning_mode != SDHCI_TUNING_MODE_3)
- mmc_retune_needed(host->mmc);
-
- ret = sdhci_suspend_host(host);
- if (ret)
- return ret;
-
- clk_disable(pltfm_host->clk);
-
- return 0;
-}
-
-static int sdhci_sirf_resume(struct device *dev)
-{
- struct sdhci_host *host = dev_get_drvdata(dev);
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- int ret;
-
- ret = clk_enable(pltfm_host->clk);
- if (ret) {
- dev_dbg(dev, "Resume: Error enabling clock\n");
- return ret;
- }
-
- return sdhci_resume_host(host);
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(sdhci_sirf_pm_ops, sdhci_sirf_suspend, sdhci_sirf_resume);
-
static const struct of_device_id sdhci_sirf_of_match[] = {
{ .compatible = "sirf,prima2-sdhc" },
{ }
@@ -276,7 +239,7 @@ MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match);
static struct platform_driver sdhci_sirf_driver = {
.driver = {
.name = "sdhci-sirf",
- .of_match_table = sdhci_sirf_of_match,
+ .of_match_table = sdhci_pltfm_pmops,
.pm = &sdhci_sirf_pm_ops,
},
.probe = sdhci_sirf_probe,
--
2.7.4
next prev parent reply other threads:[~2017-07-31 12:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-31 12:56 [PATCH 0/3] mmc: sdhci: refactor PM in sdhci-pltfm and support PM for cadence port Masahiro Yamada
2017-07-31 12:56 ` Masahiro Yamada [this message]
2017-08-02 15:50 ` [PATCH 1/3] mmc: sdhci: enable/disable the clock in sdhci_pltfm_suspend/resume kbuild test robot
2017-07-31 12:56 ` [PATCH 2/3] mmc: sdhci-pltfm: export sdhci_pltfm_suspend/resume Masahiro Yamada
2017-07-31 12:56 ` [PATCH 3/3] mmc: sdhci-cadence: add suspend / resume support Masahiro Yamada
2017-08-02 15:24 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501505809-393-2-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=adrian.hunter@intel.com \
--cc=alcooperx@gmail.com \
--cc=baohua@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=computersforpeace@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=gregory.0xf0@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=piotrs@cadence.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®