From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linuxarm@huawei.com>, <linux-scsi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <bianpan2016@163.com>,
Xiaofei Tan <tanxiaofei@huawei.com>,
John Garry <john.garry@huawei.com>
Subject: [PATCH 01/19] scsi: hisi_sas: fix reset and port ID refresh issues
Date: Fri, 11 Aug 2017 00:09:26 +0800 [thread overview]
Message-ID: <1502381384-219889-2-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1502381384-219889-1-git-send-email-john.garry@huawei.com>
From: Xiaofei Tan <tanxiaofei@huawei.com>
This patch provides fixes for the following issues:
1. Fix issue of controller reset required to send
commands. For reset process, it may be required to send
commands to the controller, but not during soft reset.
So add HISI_SAS_NOT_ACCEPT_CMD_BIT to prevent executing a
task during this period.
2. Send a broadcast event in rescan topology to detect any
topology changes during reset.
3. Previously it was not ensured that libsas has processed
the PHY up and down events after reset. Potentially this
could cause an issue that we still process the PHY event
after reset. So resolve this by flushing shot workqueue in
LLDD reset.
4. Port ID requires refresh after reset. The port ID
generated after reset is not guaranteed to be the same as
before reset, so it needs to be refreshed for each device's
ITCT.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 4 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 152 ++++++++++++++++++++++-----------
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 36 ++++----
3 files changed, 118 insertions(+), 74 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index a722f2b..3c4defa 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -33,6 +33,7 @@
#define HISI_SAS_MAX_ITCT_ENTRIES 2048
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_RESET_BIT 0
+#define HISI_SAS_REJECT_CMD_BIT 1
#define HISI_SAS_STATUS_BUF_SZ (sizeof(struct hisi_sas_status_buffer))
#define HISI_SAS_COMMAND_TABLE_SZ (sizeof(union hisi_sas_command_table))
@@ -201,6 +202,7 @@ struct hisi_sas_hw {
void (*dereg_device)(struct hisi_hba *hisi_hba,
struct domain_device *device);
int (*soft_reset)(struct hisi_hba *hisi_hba);
+ u32 (*get_phys_state)(struct hisi_hba *hisi_hba);
int max_command_entries;
int complete_hdr_size;
};
@@ -408,6 +410,4 @@ extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
struct sas_task *task,
struct hisi_sas_slot *slot);
extern void hisi_sas_init_mem(struct hisi_hba *hisi_hba);
-extern void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
- u32 state);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4022c3f..bd1d619 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -433,7 +433,7 @@ static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
struct hisi_sas_device *sas_dev = device->lldd_dev;
struct hisi_sas_dq *dq = sas_dev->dq;
- if (unlikely(test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)))
+ if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags)))
return -EINVAL;
/* protect task_prep and start_delivery sequence */
@@ -967,37 +967,117 @@ static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
sizeof(ssp_task), tmf);
}
+static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba,
+ struct asd_sas_port *sas_port, enum sas_linkrate linkrate)
+{
+ struct hisi_sas_device *sas_dev;
+ struct domain_device *device;
+ int i;
+
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ sas_dev = &hisi_hba->devices[i];
+ device = sas_dev->sas_device;
+ if ((sas_dev->dev_type == SAS_PHY_UNUSED)
+ || !device || (device->port != sas_port))
+ continue;
+
+ hisi_hba->hw->free_device(hisi_hba, sas_dev);
+
+ /* Update linkrate of directly attached device. */
+ if (!device->parent)
+ device->linkrate = linkrate;
+
+ hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+ }
+}
+
+static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
+ u32 state)
+{
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+ struct asd_sas_port *_sas_port = NULL;
+ int phy_no;
+
+ for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
+ bool do_port_check = !!(_sas_port != sas_port);
+
+ if (!sas_phy->phy->enabled)
+ continue;
+
+ /* Report PHY state change to libsas */
+ if (state & (1 << phy_no)) {
+ if (do_port_check && sas_port) {
+ struct domain_device *dev = sas_port->port_dev;
+
+ _sas_port = sas_port;
+ port->id = phy->port_id;
+ hisi_sas_refresh_port_id(hisi_hba,
+ sas_port, sas_phy->linkrate);
+
+ if (DEV_IS_EXPANDER(dev->dev_type))
+ sas_ha->notify_port_event(sas_phy,
+ PORTE_BROADCAST_RCVD);
+ }
+ } else if (old_state & (1 << phy_no))
+ /* PHY down but was up before */
+ hisi_sas_phy_down(hisi_hba, phy_no, 0);
+
+ }
+
+ drain_workqueue(hisi_hba->shost->work_q);
+}
+
static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
{
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+ struct device *dev = hisi_hba->dev;
+ struct Scsi_Host *shost = hisi_hba->shost;
+ u32 old_state, state;
+ unsigned long flags;
int rc;
if (!hisi_hba->hw->soft_reset)
return -1;
- if (!test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)) {
- struct device *dev = hisi_hba->dev;
- struct sas_ha_struct *sas_ha = &hisi_hba->sha;
- unsigned long flags;
+ if (test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
+ return -1;
- dev_dbg(dev, "controller reset begins!\n");
- scsi_block_requests(hisi_hba->shost);
- rc = hisi_hba->hw->soft_reset(hisi_hba);
- if (rc) {
- dev_warn(dev, "controller reset failed (%d)\n", rc);
- goto out;
- }
- spin_lock_irqsave(&hisi_hba->lock, flags);
- hisi_sas_release_tasks(hisi_hba);
- spin_unlock_irqrestore(&hisi_hba->lock, flags);
+ dev_dbg(dev, "controller resetting...\n");
+ old_state = hisi_hba->hw->get_phys_state(hisi_hba);
- sas_ha->notify_ha_event(sas_ha, HAE_RESET);
- dev_dbg(dev, "controller reset successful!\n");
- } else
- return -1;
+ scsi_block_requests(shost);
+ set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+ rc = hisi_hba->hw->soft_reset(hisi_hba);
+ if (rc) {
+ dev_warn(dev, "controller reset failed (%d)\n", rc);
+ clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+ goto out;
+ }
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_tasks(hisi_hba);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ sas_ha->notify_ha_event(sas_ha, HAE_RESET);
+ clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+
+ /* Init and wait for PHYs to come up and all libsas event finished. */
+ hisi_hba->hw->phys_init(hisi_hba);
+ msleep(1000);
+ drain_workqueue(hisi_hba->wq);
+ drain_workqueue(shost->work_q);
+
+ state = hisi_hba->hw->get_phys_state(hisi_hba);
+ hisi_sas_rescan_topology(hisi_hba, old_state, state);
+ dev_dbg(dev, "controller reset complete\n");
out:
- scsi_unblock_requests(hisi_hba->shost);
+ scsi_unblock_requests(shost);
clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
+
return rc;
}
@@ -1241,7 +1321,7 @@ static int hisi_sas_query_task(struct sas_task *task)
int dlvry_queue_slot, dlvry_queue, n_elem = 0, rc, slot_idx;
unsigned long flags, flags_dq;
- if (unlikely(test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)))
+ if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags)))
return -EINVAL;
if (!device->port)
@@ -1437,36 +1517,6 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
}
EXPORT_SYMBOL_GPL(hisi_sas_phy_down);
-void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
- u32 state)
-{
- struct sas_ha_struct *sas_ha = &hisi_hba->sha;
- int phy_no;
-
- for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
- struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
- struct asd_sas_phy *sas_phy = &phy->sas_phy;
- struct asd_sas_port *sas_port = sas_phy->port;
- struct domain_device *dev;
-
- if (sas_phy->enabled) {
- /* Report PHY state change to libsas */
- if (state & (1 << phy_no))
- continue;
-
- if (old_state & (1 << phy_no))
- /* PHY down but was up before */
- hisi_sas_phy_down(hisi_hba, phy_no, 0);
- }
- if (!sas_port)
- continue;
- dev = sas_port->port_dev;
-
- if (DEV_IS_EXPANDER(dev->dev_type))
- sas_ha->notify_phy_event(sas_phy, PORTE_BROADCAST_RCVD);
- }
-}
-EXPORT_SYMBOL_GPL(hisi_sas_rescan_topology);
struct scsi_transport_template *hisi_sas_stt;
EXPORT_SYMBOL_GPL(hisi_sas_stt);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 2bfea70..a6be33c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1364,8 +1364,15 @@ static void start_phys_v2_hw(struct hisi_hba *hisi_hba)
{
int i;
- for (i = 0; i < hisi_hba->n_phy; i++)
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ if (!sas_phy->phy->enabled)
+ continue;
+
start_phy_v2_hw(hisi_hba, i);
+ }
}
static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
@@ -3383,14 +3390,16 @@ static void interrupt_disable_v2_hw(struct hisi_hba *hisi_hba)
synchronize_irq(platform_get_irq(pdev, i));
}
+
+static u32 get_phys_state_v2_hw(struct hisi_hba *hisi_hba)
+{
+ return hisi_sas_read32(hisi_hba, PHY_STATE);
+}
+
static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
- u32 old_state, state;
int rc, cnt;
- int phy_no;
-
- old_state = hisi_sas_read32(hisi_hba, PHY_STATE);
interrupt_disable_v2_hw(hisi_hba);
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
@@ -3425,22 +3434,6 @@ static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
phys_reject_stp_links_v2_hw(hisi_hba);
- /* Re-enable the PHYs */
- for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
- struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
- struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
- if (sas_phy->enabled)
- start_phy_v2_hw(hisi_hba, phy_no);
- }
-
- /* Wait for the PHYs to come up and read the PHY state */
- msleep(1000);
-
- state = hisi_sas_read32(hisi_hba, PHY_STATE);
-
- hisi_sas_rescan_topology(hisi_hba, old_state, state);
-
return 0;
}
@@ -3468,6 +3461,7 @@ static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
.soft_reset = soft_reset_v2_hw,
+ .get_phys_state = get_phys_state_v2_hw,
};
static int hisi_sas_v2_probe(struct platform_device *pdev)
--
1.9.1
next prev parent reply other threads:[~2017-08-10 15:49 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-10 16:09 [PATCH 00/19] hisi_sas: misc fixes, improvements, and new features John Garry
2017-08-10 16:09 ` John Garry [this message]
2017-08-10 16:09 ` [PATCH 02/19] scsi: hisi_sas: avoid potential v2 hw interrupt issue John Garry
2017-08-10 16:09 ` [PATCH 03/19] scsi: hisi_sas: fix v2 hw underflow residual value John Garry
2017-08-10 16:09 ` [PATCH 04/19] scsi: hisi_sas: add v2 hw DFX feature John Garry
2017-08-10 16:09 ` [PATCH 05/19] scsi: hisi_sas: use array for v2 hw ECC errors John Garry
2017-08-10 16:09 ` [PATCH 06/19] scsi: hisi_sas: remove repeated device config in v2 hw John Garry
2017-08-10 16:09 ` [PATCH 07/19] scsi: hisi_sas: add irq and tasklet cleanup " John Garry
2017-08-10 16:09 ` [PATCH 08/19] scsi: hisi_sas: service interrupt ITCT_CLR interrupt " John Garry
2017-08-10 16:09 ` [PATCH 09/19] scsi: hisi_sas: support zone management commands John Garry
2017-08-10 16:09 ` [PATCH 10/19] scsi: hisi_sas: add status and command buffer for internal abort John Garry
2017-08-10 16:09 ` [PATCH 11/19] scsi: hisi_sas: Modify v3 hw STP_LINK_TIMER setting John Garry
2017-08-10 16:09 ` [PATCH 12/19] scsi: hisi_sas: fix v3 hw channel interrupt processing John Garry
2017-08-10 16:09 ` [PATCH 13/19] scsi: hisi_sas: kill tasklet when destroying irq in v3 hw John Garry
2017-08-10 16:09 ` [PATCH 14/19] scsi: hisi_sas: update some v3 register init settings John Garry
2017-08-10 16:09 ` [PATCH 15/19] scsi: hisi_sas: add reset handler for v3 hw John Garry
2017-08-10 16:09 ` [PATCH 16/19] scsi: hisi_sas: add phy_set_linkrate_v3_hw() John Garry
2017-08-10 16:09 ` [PATCH 17/19] scsi: hisi_sas: remove phy_down_v3_hw() res variable John Garry
2017-08-10 16:09 ` [PATCH 18/19] scsi: hisi_sas: replace kfree with scsi_host_put John Garry
2017-08-10 16:09 ` [PATCH 19/19] scsi: hisi_sas: remove driver versioning John Garry
2017-08-11 0:18 ` [PATCH 00/19] hisi_sas: misc fixes, improvements, and new features Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502381384-219889-2-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=bianpan2016@163.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=tanxiaofei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®