From: Vinay Simha BN <simhavcs@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vinay Simha BN <simhavcs@gmail.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org (open list:PIN CONTROLLER -
QUALCOMM),
linux-gpio@vger.kernel.org (open list:PIN CONTROL SUBSYSTEM),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2] pinctrl: qcom: General Purpose clocks for apq8064
Date: Wed, 16 Aug 2017 11:32:17 +0530 [thread overview]
Message-ID: <1502863338-6946-1-git-send-email-simhavcs@gmail.com> (raw)
Add support for general purpose (GP) clocks
for apq8064
DT binding documentation updated for
qcom,apq8064-pinctrl general purpose (GP) clocks.
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
---
v1:
* only gp_clk_1b tested in nexus7 anx7808 slimport.
v2:
* bjorn review comments incorporated
added gp clock functions
merged documentation and driver to single patch
---
---
.../bindings/pinctrl/qcom,apq8064-pinctrl.txt | 3 +-
drivers/pinctrl/qcom/pinctrl-apq8064.c | 42 ++++++++++++++++++----
2 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index a7bde64..a752a47 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -46,7 +46,8 @@ Valid values for pins are:
gpio0-gpio89
Valid values for function are:
- cam_mclk, codec_mic_i2s, codec_spkr_i2s, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
+ cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+ gp_clk_1b, gp_clk_2a, gp_clk_2b, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
diff --git a/drivers/pinctrl/qcom/pinctrl-apq8064.c b/drivers/pinctrl/qcom/pinctrl-apq8064.c
index cd96699..bcf9e61 100644
--- a/drivers/pinctrl/qcom/pinctrl-apq8064.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8064.c
@@ -295,6 +295,12 @@ enum apq8064_functions {
APQ_MUX_cam_mclk,
APQ_MUX_codec_mic_i2s,
APQ_MUX_codec_spkr_i2s,
+ APQ_MUX_gp_clk_0a,
+ APQ_MUX_gp_clk_0b,
+ APQ_MUX_gp_clk_1a,
+ APQ_MUX_gp_clk_1b,
+ APQ_MUX_gp_clk_2a,
+ APQ_MUX_gp_clk_2b,
APQ_MUX_gpio,
APQ_MUX_gsbi1,
APQ_MUX_gsbi2,
@@ -354,6 +360,24 @@ static const char * const gpio_groups[] = {
"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
"gpio85", "gpio86", "gpio87", "gpio88", "gpio89"
};
+static const char * const gp_clk_0a_groups[] = {
+ "gpio3"
+};
+static const char * const gp_clk_0b_groups[] = {
+ "gpio34"
+};
+static const char * const gp_clk_1a_groups[] = {
+ "gpio4"
+};
+static const char * const gp_clk_1b_groups[] = {
+ "gpio50"
+};
+static const char * const gp_clk_2a_groups[] = {
+ "gpio32"
+};
+static const char * const gp_clk_2b_groups[] = {
+ "gpio25"
+};
static const char * const ps_hold_groups[] = {
"gpio78"
};
@@ -452,6 +476,12 @@ static const struct msm_function apq8064_functions[] = {
FUNCTION(cam_mclk),
FUNCTION(codec_mic_i2s),
FUNCTION(codec_spkr_i2s),
+ FUNCTION(gp_clk_0a),
+ FUNCTION(gp_clk_0b),
+ FUNCTION(gp_clk_1a),
+ FUNCTION(gp_clk_1b),
+ FUNCTION(gp_clk_2a),
+ FUNCTION(gp_clk_2b),
FUNCTION(gpio),
FUNCTION(gsbi1),
FUNCTION(gsbi2),
@@ -490,8 +520,8 @@ static const struct msm_pingroup apq8064_groups[] = {
PINGROUP(0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(4, NA, NA, cam_mclk, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(3, NA, gp_clk_0a, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(4, NA, NA, cam_mclk, gp_clk_1a, NA, NA, NA, NA, NA, NA),
PINGROUP(5, NA, cam_mclk, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(6, gsbi3, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(7, gsbi3, NA, NA, NA, NA, NA, NA, NA, NA, NA),
@@ -512,16 +542,16 @@ static const struct msm_pingroup apq8064_groups[] = {
PINGROUP(22, gsbi2, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(23, gsbi2, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(24, gsbi2, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(25, gsbi2, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(25, gsbi2, gp_clk_2b, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(26, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(27, mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(28, mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(29, mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(30, mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(31, mi2s, NA, gsbi5_spi_cs2, gsbi6_spi_cs2, gsbi7_spi_cs2, NA, NA, NA, NA, NA),
- PINGROUP(32, mi2s, NA, NA, NA, NA, gsbi5_spi_cs3, gsbi6_spi_cs3, gsbi7_spi_cs3, NA, NA),
+ PINGROUP(32, mi2s, gp_clk_2a, NA, NA, NA, gsbi5_spi_cs3, gsbi6_spi_cs3, gsbi7_spi_cs3, NA, NA),
PINGROUP(33, mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(34, codec_mic_i2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(34, codec_mic_i2s, gp_clk_0b, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(35, codec_mic_i2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(36, codec_mic_i2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(37, codec_mic_i2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
@@ -537,7 +567,7 @@ static const struct msm_pingroup apq8064_groups[] = {
PINGROUP(47, spkr_i2s, gsbi5_spi_cs1, gsbi6_spi_cs1, gsbi7_spi_cs1, NA, NA, NA, NA, NA, NA),
PINGROUP(48, spkr_i2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(49, spkr_i2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(50, spkr_i2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(50, spkr_i2s, gp_clk_1b, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(51, NA, gsbi5, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(52, NA, gsbi5, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(53, NA, gsbi5, NA, NA, NA, NA, NA, NA, NA, NA),
--
2.7.4
next reply other threads:[~2017-08-16 6:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 6:02 Vinay Simha BN [this message]
2017-08-17 22:02 ` Rob Herring
2017-08-31 9:33 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502863338-6946-1-git-send-email-simhavcs@gmail.com \
--to=simhavcs@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®