mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ding Tianhong <dingtianhong@huawei.com>
To: <davem@davemloft.net>, <jeffrey.t.kirsher@intel.com>,
	<keescook@chromium.org>, <linux-kernel@vger.kernel.org>,
	<sparclinux@vger.kernel.org>, <intel-wired-lan@lists.osuosl.org>,
	<alexander.duyck@gmail.com>, <netdev@vger.kernel.org>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Subject: [PATCH net 2/2] net: ixgbe: Use new IXGBE_FLAG2_ROOT_NO_RELAXED_ORDERING flag
Date: Wed, 16 Aug 2017 17:41:47 +0800	[thread overview]
Message-ID: <1502876507-9360-3-git-send-email-dingtianhong@huawei.com> (raw)
In-Reply-To: <1502876507-9360-1-git-send-email-dingtianhong@huawei.com>

The ixgbe driver use the compile check to determine if it can
send TLPs to Root Port with the Relaxed Ordering Attribute set,
this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING
has been added to the kernel and we could check the bit4 in the PCIe
Davice Control register to determine whether we should use the Relaxed
Ordering Attributes or not, so we add a new flag which called
IXGBE_FLAG2_ROOT_NO_RELAXED_ORDERING to the ixgbe driver, it will
be set if the Root Port couldn't deal the upstream TLPs with Relaxed
Ordering Attribute, then the driver could know what to do next.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h        |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  | 37 ++++++++++++-------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 32 +++++++++++----------
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   | 17 ++++++++++++
 4 files changed, 53 insertions(+), 34 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index dd55787..50e0553 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -621,6 +621,7 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG2_EEE_CAPABLE			BIT(14)
 #define IXGBE_FLAG2_EEE_ENABLED			BIT(15)
 #define IXGBE_FLAG2_RX_LEGACY			BIT(16)
+#define IXGBE_FLAG2_ROOT_NO_RELAXED_ORDERING	BIT(17)
 
 	/* Tx fast path data */
 	int num_tx_queues;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 523f9d0..0727a30 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -175,31 +175,30 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
  **/
 static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 {
-#ifndef CONFIG_SPARC
-	u32 regval;
-	u32 i;
-#endif
+	u32 regval, i;
 	s32 ret_val;
+	struct ixgbe_adapter *adapter = hw->back;
 
 	ret_val = ixgbe_start_hw_generic(hw);
 
-#ifndef CONFIG_SPARC
-	/* Disable relaxed ordering */
-	for (i = 0; ((i < hw->mac.max_tx_queues) &&
-	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
-		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
-	}
+	if (adapter->flags2 & IXGBE_FLAG2_ROOT_NO_RELAXED_ORDERING) {
+		/* Disable relaxed ordering */
+		for (i = 0; ((i < hw->mac.max_tx_queues) &&
+		     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+			regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+		}
 
-	for (i = 0; ((i < hw->mac.max_rx_queues) &&
-	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
-		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
-			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+		for (i = 0; ((i < hw->mac.max_rx_queues) &&
+		     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+			regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+				    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+		}
 	}
-#endif
+
 	if (ret_val)
 		return ret_val;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index d4933d2..2473c0b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -342,6 +342,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 {
 	u32 i;
+	struct ixgbe_adapter *adapter = hw->back;
 
 	/* Clear the rate limiters */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
@@ -350,25 +351,26 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 	}
 	IXGBE_WRITE_FLUSH(hw);
 
-#ifndef CONFIG_SPARC
-	/* Disable relaxed ordering */
-	for (i = 0; i < hw->mac.max_tx_queues; i++) {
-		u32 regval;
+	if (adapter->flags2 & IXGBE_FLAG2_ROOT_NO_RELAXED_ORDERING) {
+		/* Disable relaxed ordering */
+		for (i = 0; i < hw->mac.max_tx_queues; i++) {
+			u32 regval;
 
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
-		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
-	}
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+			regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+		}
 
-	for (i = 0; i < hw->mac.max_rx_queues; i++) {
-		u32 regval;
+		for (i = 0; i < hw->mac.max_rx_queues; i++) {
+			u32 regval;
 
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
-		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
-			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+			regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+				    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+		}
 	}
-#endif
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index f1dbdf2..f576be7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -10081,6 +10081,23 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_ioremap;
 	}
 
+	/* If possible, we use PCIe Relaxed Ordering Attribute to deliver
+	 * Ingress Packet Data to Free List Buffers in order to allow for
+	 * chipset performance optimizations between the Root Complex and
+	 * Memory Controllers.  (Messages to the associated Ingress Queue
+	 * notifying new Packet Placement in the Free Lists Buffers will be
+	 * send without the Relaxed Ordering Attribute thus guaranteeing that
+	 * all preceding PCIe Transaction Layer Packets will be processed
+	 * first.)  But some Root Complexes have various issues with Upstream
+	 * Transaction Layer Packets with the Relaxed Ordering Attribute set.
+	 * The PCIe devices which under the Root Complexes will be cleared the
+	 * Relaxed Ordering bit in the configuration space, So we check our
+	 * PCIe configuration space to see if it's flagged with advice against
+	 * using Relaxed Ordering.
+	 */
+	if (!pcie_relaxed_ordering_enabled(pdev))
+		adapter->flags2 |= IXGBE_FLAG2_ROOT_NO_RELAXED_ORDERING;
+
 	netdev->netdev_ops = &ixgbe_netdev_ops;
 	ixgbe_set_ethtool_ops(netdev);
 	netdev->watchdog_timeo = 5 * HZ;
-- 
1.8.3.1

  parent reply	other threads:[~2017-08-16  9:44 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-16  9:41 [PATCH net 0/2] net: ixgbe: Use new flag to disable Relaxed Ordering Ding Tianhong
2017-08-16  9:41 ` [PATCH net 1/2] Revert commit 1a8b6d76dc5b ("net:add one common config...") Ding Tianhong
2017-08-16  9:41 ` Ding Tianhong [this message]
2017-08-16 18:17   ` [PATCH net 2/2] net: ixgbe: Use new IXGBE_FLAG2_ROOT_NO_RELAXED_ORDERING flag Alexander Duyck
2017-08-16 17:56 ` [PATCH net 0/2] net: ixgbe: Use new flag to disable Relaxed Ordering David Miller
2017-08-17  1:22   ` Ding Tianhong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1502876507-9360-3-git-send-email-dingtianhong@huawei.com \
    --to=dingtianhong@huawei.com \
    --cc=alexander.duyck@gmail.com \
    --cc=davem@davemloft.net \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sparclinux@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®