From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752365AbdHQJgL (ORCPT ); Thu, 17 Aug 2017 05:36:11 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:28067 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751856AbdHQJeE (ORCPT ); Thu, 17 Aug 2017 05:34:04 -0400 From: Amelie Delaunay To: Greg Kroah-Hartman , Rob Herring , Mark Rutland , Russell King , Maxime Coquelin , Alexandre Torgue , John Youn CC: , , , , Benjamin Gaignard Subject: [PATCH 0/7] Add support for USB OTG on STM32F7xx Date: Thu, 17 Aug 2017 11:32:59 +0200 Message-ID: <1502962386-6683-1-git-send-email-amelie.delaunay@st.com> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.201.20.5] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-08-17_04:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The STM32F7xx MCU family embeds two DWC2 USB OTG cores. One core is USB OTG FS and the other is USB OTG HS. The USB FS core only works with its internal phy whilst the USB HS core can work in HS with external ULPI phy or in FS/LS with the on-chip FS phy. Amelie Delaunay (7): dt-bindings: usb: Document the STM32F7xx DWC2 USB OTG HS core binding usb: dwc2: add support for STM32F7xx USB OTG HS ARM: dts: stm32: Add USB HS support for STM32F746 MCU ARM: dts: stm32: Enable USB HS on stm32746g-eval ARM: dts: stm32: Enable USB HS on stm32f746-disco ARM: dts: stm32: Add USB FS support for STM32F746 MCU ARM: dts: stm32: Enable USB FS on stm32f746-disco Documentation/devicetree/bindings/usb/dwc2.txt | 2 + arch/arm/boot/dts/stm32746g-eval.dts | 16 ++++++ arch/arm/boot/dts/stm32f746-disco.dts | 30 ++++++++++ arch/arm/boot/dts/stm32f746.dtsi | 80 ++++++++++++++++++++++++++ drivers/usb/dwc2/params.c | 11 ++++ 5 files changed, 139 insertions(+) -- 2.7.4