From: Ujjal Singh <ujjal.singh@intel.com>
To: dave.jiang@intel.com, linux-kernel@vger.kernel.org
Subject: [PATCH v3] dmaengine: ioatdma: Add intr_coalesce sysfs entry
Date: Tue, 22 Aug 2017 20:22:28 -0400 [thread overview]
Message-ID: <150344774841.96890.14419547662162447785.stgit@localhost.localdomain> (raw)
We observed performance increase with DMA copy from memory
to MMIO by changing the interrupt coalescing value to 0.
The previous set value was projected on the C5xxx Xeon
platform and no longer holds true. Removing hard coded
value and providing a tune-able in sysfs in order to allow
user to tune this on a per channel basis. By default this
value will be set to 0.
Example of sysfs variable importing for interrupt coalescing
value from command line:
echo 5> /sys/devices/pci0000:00/0000:00:04.0/dma/dma0chan0/
quickdata/intr_coalesce
Reported-by: Nithin Sujir <nsujir@tintri.com>
Signed-off-by: Ujjal Singh <ujjal.singh@intel.com>
---
drivers/dma/ioat/dma.c | 10 +++++++---
drivers/dma/ioat/dma.h | 3 +++
drivers/dma/ioat/sysfs.c | 42 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 52 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index a371b07..f70cc74 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -644,9 +644,13 @@ static void __cleanup(struct ioatdma_chan *ioat_chan, dma_addr_t phys_complete)
mod_timer(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
}
- /* 5 microsecond delay per pending descriptor */
- writew(min((5 * (active - i)), IOAT_INTRDELAY_MASK),
- ioat_chan->ioat_dma->reg_base + IOAT_INTRDELAY_OFFSET);
+ /* microsecond delay by sysfs variable per pending descriptor */
+ if (ioat_chan->intr_coalesce != ioat_chan->prev_intr_coalesce) {
+ writew(min((ioat_chan->intr_coalesce * (active - i)),
+ IOAT_INTRDELAY_MASK),
+ ioat_chan->ioat_dma->reg_base + IOAT_INTRDELAY_OFFSET);
+ ioat_chan->prev_intr_coalesce = ioat_chan->intr_coalesce;
+ }
}
static void ioat_cleanup(struct ioatdma_chan *ioat_chan)
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index a9bc1a1..56200ee 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -142,11 +142,14 @@ struct ioatdma_chan {
spinlock_t prep_lock;
struct ioat_descs descs[2];
int desc_chunks;
+ int intr_coalesce;
+ int prev_intr_coalesce;
};
struct ioat_sysfs_entry {
struct attribute attr;
ssize_t (*show)(struct dma_chan *, char *);
+ ssize_t (*store)(struct dma_chan *, const char *, size_t);
};
/**
diff --git a/drivers/dma/ioat/sysfs.c b/drivers/dma/ioat/sysfs.c
index cb4a857..3ac677f 100644
--- a/drivers/dma/ioat/sysfs.c
+++ b/drivers/dma/ioat/sysfs.c
@@ -64,8 +64,24 @@ ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
return entry->show(&ioat_chan->dma_chan, page);
}
+static ssize_t
+ioat_attr_store(struct kobject *kobj, struct attribute *attr,
+const char *page, size_t count)
+{
+ struct ioat_sysfs_entry *entry;
+ struct ioatdma_chan *ioat_chan;
+
+ entry = container_of(attr, struct ioat_sysfs_entry, attr);
+ ioat_chan = container_of(kobj, struct ioatdma_chan, kobj);
+
+ if (!entry->store)
+ return -EIO;
+ return entry->store(&ioat_chan->dma_chan, page, count);
+}
+
const struct sysfs_ops ioat_sysfs_ops = {
.show = ioat_attr_show,
+ .store = ioat_attr_store,
};
void ioat_kobject_add(struct ioatdma_device *ioat_dma, struct kobj_type *type)
@@ -121,11 +137,37 @@ static ssize_t ring_active_show(struct dma_chan *c, char *page)
}
static struct ioat_sysfs_entry ring_active_attr = __ATTR_RO(ring_active);
+static ssize_t intr_coalesce_show(struct dma_chan *c, char *page)
+{
+ struct ioatdma_chan *ioat_chan = to_ioat_chan(c);
+
+ return sprintf(page, "%d\n", ioat_chan->intr_coalesce);
+}
+
+static ssize_t intr_coalesce_store(struct dma_chan *c, const char *page,
+size_t count)
+{
+ int intr_coalesce = 0;
+ struct ioatdma_chan *ioat_chan = to_ioat_chan(c);
+
+ if (sscanf(page, "%du", &intr_coalesce) != -1) {
+ if ((intr_coalesce < 0) ||
+ (intr_coalesce > IOAT_INTRDELAY_MASK))
+ return -EINVAL;
+ ioat_chan->intr_coalesce = intr_coalesce;
+ }
+
+ return count;
+}
+
+static struct ioat_sysfs_entry intr_coalesce_attr = __ATTR_RW(intr_coalesce);
+
static struct attribute *ioat_attrs[] = {
&ring_size_attr.attr,
&ring_active_attr.attr,
&ioat_cap_attr.attr,
&ioat_version_attr.attr,
+ &intr_coalesce_attr.attr,
NULL,
};
reply other threads:[~2017-08-22 23:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=150344774841.96890.14419547662162447785.stgit@localhost.localdomain \
--to=ujjal.singh@intel.com \
--cc=dave.jiang@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®