mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rocky Hao <rocky.hao@rock-chips.com>
To: rui.zhang@intel.com, edubezval@gmail.com, heiko@sntech.de,
	robh+dt@kernel.org, mark.rutland@arm.com,
	catalin.marinas@arm.com, will.deacon@arm.com
Cc: shawn.lin@rock-chips.com, cl@rock-chips.com,
	william.wu@rock-chips.com, linux-pm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, xxx@rock-chips.com,
	jay.xu@rock-chips.com, wxt@rock-chips.com,
	huangtao@rock-chips.com, rocky.hao@rock-chips.com
Subject: [PATCH 2/5] thermal: rockchip: Support the RV1108 SoC in thermal driver
Date: Thu, 24 Aug 2017 18:27:52 +0800	[thread overview]
Message-ID: <1503570475-7850-3-git-send-email-rocky.hao@rock-chips.com> (raw)
In-Reply-To: <1503570475-7850-1-git-send-email-rocky.hao@rock-chips.com>

RV1108 SOC has one Temperature Sensor for CPU.

Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
---
 drivers/thermal/rockchip_thermal.c | 67 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 9da3e1819210..299a8ade71fa 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -242,6 +242,45 @@ struct tsadc_table {
 	int temp;
 };
 
+static const struct tsadc_table rv1108_table[] = {
+	{0, -40000},
+	{374, -40000},
+	{382, -35000},
+	{389, -30000},
+	{397, -25000},
+	{405, -20000},
+	{413, -15000},
+	{421, -10000},
+	{429, -5000},
+	{436, 0},
+	{444, 5000},
+	{452, 10000},
+	{460, 15000},
+	{468, 20000},
+	{476, 25000},
+	{483, 30000},
+	{491, 35000},
+	{499, 40000},
+	{507, 45000},
+	{515, 50000},
+	{523, 55000},
+	{531, 60000},
+	{539, 65000},
+	{547, 70000},
+	{555, 75000},
+	{562, 80000},
+	{570, 85000},
+	{578, 90000},
+	{586, 95000},
+	{594, 100000},
+	{602, 105000},
+	{610, 110000},
+	{618, 115000},
+	{626, 120000},
+	{634, 125000},
+	{TSADCV2_DATA_MASK, 125000},
+};
+
 static const struct tsadc_table rk3228_code_table[] = {
 	{0, -40000},
 	{588, -40000},
@@ -779,6 +818,30 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channel for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rv1108_table,
+		.length = ARRAY_SIZE(rv1108_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
 static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
 	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
 	.chn_num = 1, /* one channel for tsadc */
@@ -928,6 +991,10 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{
+		.compatible = "rockchip,rv1108-tsadc",
+		.data = (void *)&rv1108_tsadc_data,
+	},
+	{
 		.compatible = "rockchip,rk3228-tsadc",
 		.data = (void *)&rk3228_tsadc_data,
 	},
-- 
1.9.1

  parent reply	other threads:[~2017-08-24 10:30 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-24 10:27 [PATCH 0/5] thermal: rockchip: add tsadc support in thermal driver and IPA thermal control for RV1108 in dts Rocky Hao
2017-08-24 10:27 ` [PATCH 1/5] dt-bindings: rockchip-thermal: Support the RV1108 SoC compatible Rocky Hao
2017-08-31 17:57   ` Rob Herring
2017-09-15  1:49   ` Caesar Wang
2017-09-15  3:20     ` rocky.hao
2017-08-24 10:27 ` Rocky Hao [this message]
2017-09-15  2:10   ` [PATCH 2/5] thermal: rockchip: Support the RV1108 SoC in thermal driver Caesar Wang
2017-09-15  3:19     ` Caesar Wang
2017-08-24 10:27 ` [PATCH 3/5] arm: dts: rockchip: add tsadc node for RV1108 SoC Rocky Hao
2017-09-15  2:25   ` Caesar Wang
2017-09-15  3:52     ` rocky.hao
2017-10-17 19:00   ` Heiko Stuebner
2017-08-24 10:27 ` [PATCH 4/5] arm: dts: rockchip: add thermal nodes " Rocky Hao
2017-09-15  6:32   ` rocky.hao
2017-10-17 19:00   ` Heiko Stuebner
2017-08-24 10:32 ` [PATCH 5/5] arm: dts: rockchip: enable tsadc module on RV1108 evaluation board Rocky Hao
2017-10-17 19:01   ` Heiko Stuebner
2017-10-17  0:15 ` [PATCH 0/5] thermal: rockchip: add tsadc support in thermal driver and IPA thermal control for RV1108 in dts Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1503570475-7850-3-git-send-email-rocky.hao@rock-chips.com \
    --to=rocky.hao@rock-chips.com \
    --cc=catalin.marinas@arm.com \
    --cc=cl@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=jay.xu@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=shawn.lin@rock-chips.com \
    --cc=will.deacon@arm.com \
    --cc=william.wu@rock-chips.com \
    --cc=wxt@rock-chips.com \
    --cc=xxx@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®