From: Thomas Meyer <thomas@m3y3r.de>
To: netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 7/10] net/mlx4_core: Use ARRAY_SIZE macro
Date: Sun, 03 Sep 2017 14:19:31 +0200 [thread overview]
Message-ID: <1504439110050-1961876957-7-diffsplit-thomas@m3y3r.de> (raw)
In-Reply-To: <1504439110050-939061377-0-diffsplit-thomas@m3y3r.de>
Use ARRAY_SIZE macro, rather than explicitly coding some variant of it
yourself.
Found with: find -type f -name "*.c" -o -name "*.h" | xargs perl -p -i -e
's/\bsizeof\s*\(\s*(\w+)\s*\)\s*\ /\s*sizeof\s*\(\s*\1\s*\[\s*0\s*\]\s*\)
/ARRAY_SIZE(\1)/g' and manual check/verification.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
---
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 041c0ed65929..8eca12927be0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -36,6 +36,7 @@
#include <linux/mlx4/cmd.h>
#include <linux/module.h>
#include <linux/cache.h>
+#include <linux/kernel.h>
#include "fw.h"
#include "icm.h"
@@ -2450,14 +2451,14 @@ int mlx4_config_dev_retrieval(struct mlx4_dev *dev,
csum_mask = (config_dev.rx_checksum_val >> CONFIG_DEV_RX_CSUM_MODE_PORT1_BIT_OFFSET) &
CONFIG_DEV_RX_CSUM_MODE_MASK;
- if (csum_mask >= sizeof(config_dev_csum_flags)/sizeof(config_dev_csum_flags[0]))
+ if (csum_mask >= ARRAY_SIZE(config_dev_csum_flags))
return -EINVAL;
params->rx_csum_flags_port_1 = config_dev_csum_flags[csum_mask];
csum_mask = (config_dev.rx_checksum_val >> CONFIG_DEV_RX_CSUM_MODE_PORT2_BIT_OFFSET) &
CONFIG_DEV_RX_CSUM_MODE_MASK;
- if (csum_mask >= sizeof(config_dev_csum_flags)/sizeof(config_dev_csum_flags[0]))
+ if (csum_mask >= ARRAY_SIZE(config_dev_csum_flags))
return -EINVAL;
params->rx_csum_flags_port_2 = config_dev_csum_flags[csum_mask];
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 5fe5cdc51357..fe18650c9342 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -34,6 +34,7 @@
*/
#include <linux/module.h>
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
@@ -3658,7 +3659,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data,
* per port, we must limit the number of VFs to 63 (since their are
* 128 MACs)
*/
- for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]) && i < num_vfs_argc;
+ for (i = 0; i < ARRAY_SIZE(nvfs) && i < num_vfs_argc;
total_vfs += nvfs[param_map[num_vfs_argc - 1][i]], i++) {
nvfs[param_map[num_vfs_argc - 1][i]] = num_vfs[i];
if (nvfs[i] < 0) {
@@ -3667,7 +3668,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data,
goto err_disable_pdev;
}
}
- for (i = 0; i < sizeof(prb_vf)/sizeof(prb_vf[0]) && i < probe_vfs_argc;
+ for (i = 0; i < ARRAY_SIZE(prb_vf) && i < probe_vfs_argc;
i++) {
prb_vf[param_map[probe_vfs_argc - 1][i]] = probe_vf[i];
if (prb_vf[i] < 0 || prb_vf[i] > nvfs[i]) {
@@ -3746,11 +3747,11 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data,
if (total_vfs) {
unsigned vfs_offset = 0;
- for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]) &&
+ for (i = 0; i < ARRAY_SIZE(nvfs) &&
vfs_offset + nvfs[i] < extended_func_num(pdev);
vfs_offset += nvfs[i], i++)
;
- if (i == sizeof(nvfs)/sizeof(nvfs[0])) {
+ if (i == ARRAY_SIZE(nvfs)) {
err = -ENODEV;
goto err_release_regions;
}
next prev parent reply other threads:[~2017-09-03 12:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-03 12:19 [PATCH 0/10] Use ARRAY_SIZE macro - v4.13-rc7 Thomas Meyer
2017-09-03 12:19 ` [PATCH 5/10] [media] lgdt3306a: Use ARRAY_SIZE macro Thomas Meyer
2017-09-03 12:19 ` [PATCH 3/10] drm/i915/gvt: " Thomas Meyer
2017-09-03 12:19 ` Thomas Meyer [this message]
2017-09-03 13:14 ` [PATCH 7/10] net/mlx4_core: " Tariq Toukan
2017-09-05 18:50 ` David Miller
2017-09-03 12:19 ` [PATCH 10/10] staging/atomisp: " Thomas Meyer
2017-09-03 12:19 ` [PATCH 6/10] ixgbe: " Thomas Meyer
2017-09-05 18:50 ` David Miller
2017-09-05 19:45 ` Thomas Meyer
2017-09-05 20:01 ` Joe Perches
2017-09-05 21:22 ` David Miller
2017-09-06 9:08 ` Thomas Meyer
2017-09-06 15:19 ` Joe Perches
2017-09-03 12:19 ` [PATCH 1/10] KVM: PPC: Book3S HV: " Thomas Meyer
2017-10-19 3:44 ` Paul Mackerras
2017-09-03 12:19 ` [PATCH 8/10] ath9k: " Thomas Meyer
2017-09-25 7:15 ` [8/10] " Kalle Valo
2017-09-03 12:19 ` [PATCH 4/10] drm/nouveau/bios/init: " Thomas Meyer
2017-09-03 12:19 ` [PATCH 2/10] drm/amdgpu: " Thomas Meyer
2017-09-03 12:19 ` [PATCH 9/10] [SCSI] bfa: " Thomas Meyer
2017-09-03 15:36 ` [PATCH 0/10] Use ARRAY_SIZE macro - v4.13-rc7 Joe Perches
2017-09-03 19:59 ` Thomas Meyer
2017-09-03 20:20 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504439110050-1961876957-7-diffsplit-thomas@m3y3r.de \
--to=thomas@m3y3r.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®