[PATCH v9 11/12] x86/time: Initialize interrupt mode behind timer init

[Dou Liyang <douly.fnst@cn.fujitsu.com>]

In start_kernel(), firstly, it works on the default interrupy mode, then
switch to the final mode. Normally, Booting with BIOS reset is OK.

But, At dump-capture kernel, it boot up without BIOS reset, default mode
may not be compatible with the actual registers, that causes the delivery
interrupt to fail.

Try to set up the final mode as soon as possible. according to the parts
which split from that initialization:

1) Set up the APIC/IOAPIC (including testing whether the timer
   interrupt works)

2) Calibrate TSC

3) Set up the local APIC timer

-- From Thomas Gleixner

Initializing the mode should be earlier than calibrating TSC as soon as
possible and needs testing whether the timer interrupt works at the same
time.

call it behind timers init, which meets the above conditions.

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
---
 arch/x86/kernel/apic/apic.c | 2 --
 arch/x86/kernel/smpboot.c   | 7 +++----
 arch/x86/kernel/time.c      | 5 +++++
 3 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8dbcff2..3d08649 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2423,8 +2423,6 @@ void __init apic_bsp_setup(bool upmode)
 #ifdef CONFIG_UP_LATE_INIT
 void __init up_late_init(void)
 {
-	x86_init.irqs.intr_mode_init();
-
 	if (apic_intr_mode == APIC_PIC)
 		return;
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 76fc857..6263d63 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1260,8 +1260,9 @@ static void __init smp_get_logical_apicid(void)
 }
 
 /*
- * Prepare for SMP bootup.  The MP table or ACPI has been read
- * earlier.  Just do some sanity checking here and enable APIC mode.
+ * Prepare for SMP bootup.
+ * @max_cpus: configured maximum number of CPUs, It is a legacy parameter
+ *            for common interface support.
  */
 void __init native_smp_prepare_cpus(unsigned int max_cpus)
 {
@@ -1293,8 +1294,6 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 	set_cpu_sibling_map(0);
 
-	x86_init.irqs.intr_mode_init();
-
 	smp_sanity_check();
 
 	switch (apic_intr_mode) {
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index e0754cd..3ceb834 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -84,6 +84,11 @@ void __init hpet_time_init(void)
 static __init void x86_late_time_init(void)
 {
 	x86_init.timers.timer_init();
+	/*
+	 * After PIT/HPET timers init, select and setup
+	 * the final interrupt mode for delivering IRQs.
+	 */
+	x86_init.irqs.intr_mode_init();
 	tsc_init();
 }
 
-- 
2.5.5