From: Harsha Sharma <harshasharmaiitr@gmail.com>
To: gregkh@linuxfoundation.org, jic23@kernel.org, lars@metafoo.de,
knaack.h@gmx.de
Cc: linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, outreachy-kernel@googlegroups.com,
Harsha Sharma <harshasharmaiitr@gmail.com>
Subject: [PATCH] staging: iio: trigger: Move header file content to source file
Date: Tue, 26 Sep 2017 23:56:15 +0530 [thread overview]
Message-ID: <1506450375-15538-1-git-send-email-harshasharmaiitr@gmail.com> (raw)
The contents of the header file are used only by this single source file.
Moved content into iio-trig-bfin-timer.c and removed iio-trig-bfin-timer.h
Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
---
drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 20 ++++++++++++++++++-
drivers/staging/iio/trigger/iio-trig-bfin-timer.h | 24 -----------------------
2 files changed, 19 insertions(+), 25 deletions(-)
delete mode 100644 drivers/staging/iio/trigger/iio-trig-bfin-timer.h
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index d80dcf8..2cedcaf 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -19,7 +19,25 @@
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
-#include "iio-trig-bfin-timer.h"
+/**
+ * struct iio_bfin_timer_trigger_pdata - timer trigger platform data
+ * @output_enable: Enable external trigger pulse generation.
+ * @active_low: Whether the trigger pulse is active low.
+ * @duty_ns: Length of the trigger pulse in nanoseconds.
+ *
+ * This struct is used to configure the output pulse generation of the blackfin
+ * timer trigger. If output_enable is set to true an external trigger signal
+ * will generated on the pin corresponding to the timer. This is useful for
+ * converters which needs an external signal to start conversion. active_low and
+ * duty_ns are used to configure the type of the trigger pulse. If output_enable
+ * is set to false no external trigger pulse will be generated and active_low
+ * and duty_ns are ignored.
+ **/
+struct iio_bfin_timer_trigger_pdata {
+ bool output_enable;
+ bool active_low;
+ unsigned int duty_ns;
+};
struct bfin_timer {
unsigned short id, bit;
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.h b/drivers/staging/iio/trigger/iio-trig-bfin-timer.h
deleted file mode 100644
index c07321f..0000000
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __IIO_BFIN_TIMER_TRIGGER_H__
-#define __IIO_BFIN_TIMER_TRIGGER_H__
-
-/**
- * struct iio_bfin_timer_trigger_pdata - timer trigger platform data
- * @output_enable: Enable external trigger pulse generation.
- * @active_low: Whether the trigger pulse is active low.
- * @duty_ns: Length of the trigger pulse in nanoseconds.
- *
- * This struct is used to configure the output pulse generation of the blackfin
- * timer trigger. If output_enable is set to true an external trigger signal
- * will generated on the pin corresponding to the timer. This is useful for
- * converters which needs an external signal to start conversion. active_low and
- * duty_ns are used to configure the type of the trigger pulse. If output_enable
- * is set to false no external trigger pulse will be generated and active_low
- * and duty_ns are ignored.
- **/
-struct iio_bfin_timer_trigger_pdata {
- bool output_enable;
- bool active_low;
- unsigned int duty_ns;
-};
-
-#endif
--
1.9.1
next reply other threads:[~2017-09-26 18:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 18:26 Harsha Sharma [this message]
2017-09-30 20:41 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506450375-15538-1-git-send-email-harshasharmaiitr@gmail.com \
--to=harshasharmaiitr@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome