mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jaejoong Kim <climbbb.kim@gmail.com>
To: Alan Stern <stern@rowland.harvard.edu>, Jiri Kosina <jikos@kernel.org>
Cc: Andrey Konovalov <andreyknvl@google.com>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	USB list <linux-usb@vger.kernel.org>,
	linux-input@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
	syzkaller <syzkaller@googlegroups.com>,
	Jaejoong Kim <climbbb.kim@gmail.com>
Subject: [PATCH v2] HID: usbhid: fix out-of-bounds bug
Date: Thu, 28 Sep 2017 19:16:30 +0900	[thread overview]
Message-ID: <1506593790-19865-1-git-send-email-climbbb.kim@gmail.com> (raw)
In-Reply-To: <CAL6iAaJQZ4JB6udi3UFyGM0uYYE4NECZ5fK8ujb+ANfwe9tYDw@mail.gmail.com>

The hid descriptor identifies the length and type of subordinate
descriptors for a device. If the received hid descriptor is smaller than
the size of the struct hid_descriptor, it is possible to cause
out-of-bounds.

In addition, if bNumDescriptors of the hid descriptor have an incorrect
value, this can also cause out-of-bounds while approaching hdesc->desc[n].

So check the size of hid descriptor and bNumDescriptors.

	BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20
	Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261

	CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted
	4.14.0-rc1-42251-gebb2c2437d80 #169
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	Workqueue: usb_hub_wq hub_event
	Call Trace:
	__dump_stack lib/dump_stack.c:16
	dump_stack+0x292/0x395 lib/dump_stack.c:52
	print_address_description+0x78/0x280 mm/kasan/report.c:252
	kasan_report_error mm/kasan/report.c:351
	kasan_report+0x22f/0x340 mm/kasan/report.c:409
	__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427
	usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004
	hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944
	usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369
	usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
	generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
	usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
	hub_port_connect drivers/usb/core/hub.c:4903
	hub_port_connect_change drivers/usb/core/hub.c:5009
	port_event drivers/usb/core/hub.c:5115
	hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
	process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
	worker_thread+0x221/0x1850 kernel/workqueue.c:2253
	kthread+0x3a1/0x470 kernel/kthread.c:231
	ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
---

Changes in v2:
- write a new commit message because orginal version is wrong approach
- add check hid descriptor size
- get proper value for bNumDescriptors as suggested by Alan Stern
- fix the Reported-by

 drivers/hid/usbhid/hid-core.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 089bad8..045b5da 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -975,6 +975,8 @@ static int usbhid_parse(struct hid_device *hid)
 	unsigned int rsize = 0;
 	char *rdesc;
 	int ret, n;
+	int num_descriptors;
+	size_t offset = offsetof(struct hid_descriptor, desc);
 
 	quirks = usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
 			le16_to_cpu(dev->descriptor.idProduct));
@@ -997,10 +999,18 @@ static int usbhid_parse(struct hid_device *hid)
 		return -ENODEV;
 	}
 
+	if (hdesc->bLength < sizeof(struct hid_descriptor)) {
+		dbg_hid("hid descriptor is too short\n");
+		return -EINVAL;
+	}
+
 	hid->version = le16_to_cpu(hdesc->bcdHID);
 	hid->country = hdesc->bCountryCode;
 
-	for (n = 0; n < hdesc->bNumDescriptors; n++)
+	num_descriptors = min_t(int, hdesc->bNumDescriptors,
+	       (hdesc->bLength - offset) / sizeof(struct hid_class_descriptor));
+
+	for (n = 0; n < num_descriptors; n++)
 		if (hdesc->desc[n].bDescriptorType == HID_DT_REPORT)
 			rsize = le16_to_cpu(hdesc->desc[n].wDescriptorLength);
 
-- 
2.7.4

  reply	other threads:[~2017-09-28 10:16 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CAAZ5spCffHnU_EtnhKpP5cDqsEKaGMatpaqAJqorvph+vZm1Sw@mail.gmail.com>
2017-09-27 14:29 ` [PATCH] " Alan Stern
2017-09-28  8:44   ` Jaejoong Kim
2017-09-28 10:16     ` Jaejoong Kim [this message]
2017-10-10  7:25       ` [PATCH v2] " Jaejoong Kim
2017-10-10 11:23         ` Andrey Konovalov
2017-10-10 14:22         ` Alan Stern
2017-10-11 13:06       ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1506593790-19865-1-git-send-email-climbbb.kim@gmail.com \
    --to=climbbb.kim@gmail.com \
    --cc=andreyknvl@google.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=syzkaller@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®