From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755273AbdJIQLt (ORCPT ); Mon, 9 Oct 2017 12:11:49 -0400 Received: from esa2.microchip.iphmx.com ([68.232.149.84]:18605 "EHLO esa2.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755114AbdJIQKN (ORCPT ); Mon, 9 Oct 2017 12:10:13 -0400 X-IronPort-AV: E=Sophos;i="5.42,500,1500966000"; d="scan'208";a="7707648" From: Claudiu Beznea To: , , , , CC: , , , Claudiu Beznea Subject: [PATCH 12/15] ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines Date: Mon, 9 Oct 2017 19:09:34 +0300 Message-ID: <1507565377-1545-13-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1507565377-1545-1-git-send-email-claudiu.beznea@microchip.com> References: <1507565377-1545-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org As the board have the proper pull-ups soldered on the data and CMD lines we don't need them specified in the PADs. So remove the "bias-pull-up" property and set "bias-disable". This will also save some power. Signed-off-by: Nicolas Ferre [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 82777747cc72..cd53c0a33591 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -444,7 +444,7 @@ , , ; - bias-pull-up; + bias-disable; }; ck_cd_rstn_vddsel { @@ -463,7 +463,7 @@ , , ; - bias-pull-up; + bias-disable; }; conf-ck_cd { -- 2.7.4