From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932247AbdJJKMo (ORCPT ); Tue, 10 Oct 2017 06:12:44 -0400 Received: from esa1.microchip.iphmx.com ([68.232.147.91]:17852 "EHLO esa1.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755705AbdJJKK6 (ORCPT ); Tue, 10 Oct 2017 06:10:58 -0400 X-IronPort-AV: E=Sophos;i="5.42,504,1500966000"; d="scan'208";a="8192999" From: Claudiu Beznea To: , , , , CC: , , , Claudiu Beznea Subject: [PATCH v2 08/14] ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines Date: Tue, 10 Oct 2017 13:09:43 +0300 Message-ID: <1507630189-15504-9-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1507630189-15504-1-git-send-email-claudiu.beznea@microchip.com> References: <1507630189-15504-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Nicolas Ferre As the board have the proper pull-ups soldered on the data and CMD lines we don't need them specified in the PADs. So remove the "bias-pull-up" property and set "bias-disable". Signed-off-by: Nicolas Ferre [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea --- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 651ed5d4defc..e72036fa8ddb 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -349,7 +349,7 @@ , , ; - bias-pull-up; + bias-disable; }; ck_cd_vddsel { @@ -367,7 +367,7 @@ , , ; - bias-pull-up; + bias-disable; }; conf-ck_cd { -- 2.7.4