From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: Fabio Estevam <fabio.estevam@nxp.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Sascha Hauer <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: "Lothar Waßmann" <LW@KARO-electronics.de>
Subject: [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
Date: Wed, 11 Oct 2017 13:50:25 +0200 [thread overview]
Message-ID: <1507722635-30801-3-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1507722635-30801-1-git-send-email-LW@KARO-electronics.de>
The display, that incorporates this touchpanel is obsolete and won't
be supported any more.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 23 +----------------------
arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 22 +---------------------
arch/arm/boot/dts/imx6q-tx6q-1110.dts | 21 ---------------------
arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 22 +---------------------
4 files changed, 3 insertions(+), 85 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index 5e0c6bb..f0f759a 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -98,19 +98,6 @@
};
};
-&i2c3 {
- polytouch2: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupt-parent = <&gpio3>;
- interrupts = <22 0>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
@@ -168,11 +155,3 @@
&pwm1 {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
index b9a783f..c817324 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -106,18 +106,6 @@
xceiver-supply = <®_3v3>;
};
-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&kpp {
status = "disabled"; /* pads partially clash with backlight1 PWM */
};
@@ -245,11 +233,3 @@
&pwm1 {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 0f5e638..900557d 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -98,19 +98,6 @@
};
};
-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupt-parent = <&gpio3>;
- interrupts = <22 0>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
@@ -172,11 +159,3 @@
&sata {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
index d78b129..6b42c44 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -107,18 +107,6 @@
xceiver-supply = <®_3v3>;
};
-&i2c3 {
- polytouch1: eeti@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eeti>;
- interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
- wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-};
-
&ipu2 {
status = "disabled";
};
@@ -254,11 +242,3 @@
&sata {
status = "okay";
};
-
-&iomuxc {
- pinctrl_eeti: eetigrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
- >;
- };
-};
--
2.1.4
next prev parent reply other threads:[~2017-10-11 11:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-11 11:50 [PATCH 0/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann
2017-10-11 11:50 ` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann
2017-10-11 11:50 ` Lothar Waßmann [this message]
2017-10-11 11:50 ` [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann
2017-10-11 11:50 ` [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann
2017-10-11 11:50 ` [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann
2017-10-11 11:50 ` [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset duration Lothar Waßmann
2017-10-11 11:50 ` [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann
2017-10-11 11:50 ` [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann
2017-10-11 11:50 ` [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann
2017-10-11 15:11 ` Philipp Zabel
2017-10-11 11:50 ` [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann
2017-10-11 11:50 ` [PATCH 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann
2017-10-11 11:50 ` [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann
2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann
2017-10-17 8:53 ` [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507722635-30801-3-git-send-email-LW@KARO-electronics.de \
--to=lw@karo-electronics.de \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®