mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Masami Hiramatsu <masami.hiramatsu@linaro.org>,
	Jassi Brar <jaswinder.singh@linaro.org>,
	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH net-next v2 0/2] add UniPhier AVE ethernet support
Date: Fri, 13 Oct 2017 09:35:26 +0900	[thread overview]
Message-ID: <1507854928-4357-1-git-send-email-hayashi.kunihiko@socionext.com> (raw)

This series adds support for Socionext AVE ethernet controller implemented
on UniPhier SoCs. This driver supports RGMII/RMII modes.

v1: http://www.spinics.net/lists/netdev/msg454292.html

The PHY patch included in v1 has already separated in:
http://www.spinics.net/lists/netdev/msg454595.html

Changes since v1:
- add/remove devicetree properties and sub-node
  - remove "internal-phy-interrupt" and "desc-bits" property
  - add SoC data structures based on compatible strings
  - add node operation to apply "mdio" sub-node
- add support for features
  - add support for {get,set}_pauseparam and pause frame operations
  - add support for ndo_get_stats64 instead of ndo_get_stats
- replace with desiable functions
  - replace check for valid phy_mode with phy_interface{_mode}_is_rgmii()
  - replace phy attach message with phy_attached_info()
  - replace 32bit operation with {upper,lower}_32_bits() on ave_wdesc_addr()
  - replace nway_reset and get_link with generic functions
- move operations to proper functions
  - move phy_start_aneg() to ndo_open,
    and remove unnecessary PHY interrupt operations
    See http://www.spinics.net/lists/netdev/msg454590.html
  - move irq initialization and descriptor memory allocation to ndo_open
  - move initialization of reset and clock and mdiobus to ndo_init
- fix skbuffer operations
  - fix skb alignment operations and add Rx buffer adjustment for descriptor
    See http://www.spinics.net/lists/netdev/msg456014.html
  - add error returns when dma_map_single() failed 
- clean up code structures
  - clean up wait-loop and wake-queue conditions
  - add ave_wdesc_addr() and offset definitions
  - add ave_macaddr_init() to clean up mac-address operation
  - fix checking whether Tx entry is not enough
  - fix supported features of phydev
  - add necessary free/disable operations
  - add phydev check on ave_{get,set}_wol()
  - remove netif_carrier functions, phydev initializer, and Tx budget check
- change obsolate codes
  - replace ndev->{base_addr,irq} with the members of ave_private
- rename goto labels and mask definitions, and remove unused codes

Kunihiko Hayashi (2):
  dt-bindings: net: add DT bindings for Socionext UniPhier AVE
  net: ethernet: socionext: add AVE ethernet driver

 .../bindings/net/socionext,uniphier-ave4.txt       |   53 +
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/socionext/Kconfig             |   22 +
 drivers/net/ethernet/socionext/Makefile            |    4 +
 drivers/net/ethernet/socionext/sni_ave.c           | 1773 ++++++++++++++++++++
 6 files changed, 1854 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
 create mode 100644 drivers/net/ethernet/socionext/Kconfig
 create mode 100644 drivers/net/ethernet/socionext/Makefile
 create mode 100644 drivers/net/ethernet/socionext/sni_ave.c

-- 
2.7.4

             reply	other threads:[~2017-10-13  0:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-13  0:35 Kunihiko Hayashi [this message]
2017-10-13  0:35 ` [PATCH net-next v2 1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE Kunihiko Hayashi
2017-10-13 16:41   ` Masahiro Yamada
2017-10-18 10:23     ` Kunihiko Hayashi
2017-10-15 14:52   ` Masahiro Yamada
2017-10-13  0:35 ` [PATCH net-next v2 2/2] net: ethernet: socionext: add AVE ethernet driver Kunihiko Hayashi
2017-10-15 15:08   ` Masahiro Yamada
2017-10-18 10:23     ` Kunihiko Hayashi
2017-10-19  0:29       ` Masahiro Yamada
2017-10-19 10:35         ` Kunihiko Hayashi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507854928-4357-1-git-send-email-hayashi.kunihiko@socionext.com \
    --to=hayashi.kunihiko@socionext.com \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jaswinder.singh@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=masami.hiramatsu@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®