From: Luwei Kang <luwei.kang@intel.com>
To: kvm@vger.kernel.org
Cc: pbonzini@redhat.com, rkrcmar@redhat.com, tglx@linutronix.de,
mingo@redhat.com, hpa@zytor.com, x86@kernel.org,
linux-kernel@vger.kernel.org,
Chao Peng <chao.p.peng@linux.intel.com>,
Luwei Kang <luwei.kang@intel.com>
Subject: [PATCH 8/9] KVM: x86: Implement Intel processor trace context switch
Date: Mon, 16 Oct 2017 20:13:54 +0800 [thread overview]
Message-ID: <1508156034-4979-1-git-send-email-luwei.kang@intel.com> (raw)
From: Chao Peng <chao.p.peng@linux.intel.com>
Load/Store Intel processor trace register in context switch.
MSR IA32_RTIT_CTL is loaded/stored automatically from VMCS,
other MSRs are loaded/stored manaully.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
---
arch/x86/kvm/vmx.c | 100 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 5e86b5d..3c9ce3e 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2146,6 +2146,86 @@ static bool pt_pmi(void)
.pmi = pt_pmi,
};
+static inline void pt_load_msr(struct pt_ctx *ctx, unsigned int addr_num)
+{
+ u32 i;
+
+ wrmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
+ wrmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
+ wrmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
+ wrmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
+ for (i = 0; i < addr_num; i++)
+ wrmsrl(MSR_IA32_RTIT_ADDR0_A + i, ctx->addrs[i]);
+}
+
+static inline void pt_save_msr(struct pt_ctx *ctx, unsigned int addr_num)
+{
+ u32 i;
+
+ rdmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
+ rdmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
+ rdmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
+ rdmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
+ for (i = 0; i < addr_num; i++)
+ rdmsrl(MSR_IA32_RTIT_ADDR0_A + i, ctx->addrs[i]);
+}
+
+/*
+ * host-guest mode: save host and load guest.
+ * guest mode: load guest only.
+ * host mode: just need disable processor trace because guest will not
+ * touch it.
+ * system mode: do nothing.
+ */
+static void pt_guest_enter(struct vcpu_vmx *vmx)
+{
+ u64 ctl;
+
+ /*
+ * Save host IA32_RTIT_CTL MSR and disable processor trace.
+ * If the "Load IA32_RTIT_CTL on entry" is 1, IA32_RTIT_CTL.TraceEn
+ * must be zero. Otherwish, VMCS control check will cause a
+ * failed-VMentry.
+ */
+ if (pt_mode == PT_MODE_HOST || pt_mode == PT_MODE_HOST_GUEST) {
+ rdmsrl(MSR_IA32_RTIT_CTL, ctl);
+ vmx->pt_desc.host.ctl = ctl;
+ if (ctl & RTIT_CTL_TRACEEN) {
+ ctl &= ~RTIT_CTL_TRACEEN;
+ wrmsrl(MSR_IA32_RTIT_CTL, ctl);
+ }
+ }
+
+ if (pt_mode == PT_MODE_HOST_GUEST) {
+ pt_save_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_num);
+ pt_load_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_num);
+ }
+
+ if (pt_mode == PT_MODE_GUEST)
+ pt_load_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_num);
+}
+
+static void pt_guest_exit(struct vcpu_vmx *vmx)
+{
+ /*
+ * When "Clear IA32_RTIT_CTL on exit" exit control is set to 1,
+ * IA32_RTIT_CTL MSR will be cleared on VMexit after it hase been
+ * saved. So we need to restore the status of IA32_RTIT_CTL MSR
+ * in host and host-guest mode.
+ */
+ if (pt_mode == PT_MODE_HOST_GUEST) {
+ pt_save_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_num);
+ pt_load_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_num);
+ wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
+ }
+
+ if (pt_mode == PT_MODE_GUEST)
+ pt_save_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_num);
+
+ if (pt_mode == PT_MODE_HOST)
+ wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
+}
+
static void vmx_save_host_state(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -5648,6 +5728,13 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
vmcs_write16(GUEST_PML_INDEX, PML_ENTITY_NUM - 1);
}
+ if (pt_mode == PT_MODE_GUEST || pt_mode == PT_MODE_HOST_GUEST) {
+ u32 eax, ebx, ecx, edx;
+
+ cpuid_count(0x14, 1, &eax, &ebx, &ecx, &edx);
+ vmx->pt_desc.addr_num = eax & 0x7;
+ }
+
return 0;
}
@@ -5742,6 +5829,15 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
update_exception_bitmap(vcpu);
vpid_sync_context(vmx->vpid);
+
+ if (pt_mode == PT_MODE_GUEST || pt_mode == PT_MODE_HOST_GUEST) {
+ memset(&vmx->pt_desc.host, 0, sizeof(vmx->pt_desc.host));
+ memset(&vmx->pt_desc.guest, 0, sizeof(vmx->pt_desc.guest));
+ /* Bit[6~0] are forced to 1, writes are ignored. */
+ vmx->pt_desc.guest.output_mask = 0x7F;
+ /* Clear the status of IA32_RTIT_CTL in VMCS guest state. */
+ vmcs_write32(GUEST_IA32_RTIT_CTL, 0);
+ }
}
/*
@@ -9419,6 +9515,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
vcpu->arch.pkru != vmx->host_pkru)
__write_pkru(vcpu->arch.pkru);
+ pt_guest_enter(vmx);
+
atomic_switch_perf_msrs(vmx);
debugctlmsr = get_debugctlmsr();
@@ -9554,6 +9652,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
| (1 << VCPU_EXREG_CR3));
vcpu->arch.regs_dirty = 0;
+ pt_guest_exit(vmx);
+
/*
* eager fpu is enabled if PKEY is supported and CR4 is switched
* back on host, so it is safe to read guest PKRU from current
--
1.8.3.1
reply other threads:[~2017-10-17 1:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508156034-4979-1-git-send-email-luwei.kang@intel.com \
--to=luwei.kang@intel.com \
--cc=chao.p.peng@linux.intel.com \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®