From: Ludovic Barre <ludovic.Barre@st.com>
To: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
Marek Vasut <marek.vasut@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Richard Weinberger <richard@nod.at>,
Alexandre Torgue <alexandre.torgue@st.com>,
Rob Herring <robh+dt@kernel.org>, <linux-mtd@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
"Ludovic Barre" <ludovic.barre@st.com>
Subject: [PATCH v2 2/3] mtd: spi-nor: stm32-quadspi: fix prefetching outside fsize
Date: Thu, 26 Oct 2017 17:12:34 +0200 [thread overview]
Message-ID: <1509030755-19044-3-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1509030755-19044-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
When memory-mapped mode is used, a prefetching mechanism fully
managed by the hardware allows to optimize the read from external
the QSPI memory. A 32-bytes FIFO is used for prefetching.
When the limit of flash size - fifo size is reached the prefetching
mechanism tries to read outside the fsize.
The stm32 quadspi hardware become busy and should be aborted.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reported-by: Bruno Herrera <bruherrera@gmail.com>
Tested-by: Bruno Herrera <bruherrera@gmail.com>
---
drivers/mtd/spi-nor/stm32-quadspi.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c
index ad6a3e1..70710be 100644
--- a/drivers/mtd/spi-nor/stm32-quadspi.c
+++ b/drivers/mtd/spi-nor/stm32-quadspi.c
@@ -113,6 +113,7 @@
#define STM32_MAX_MMAP_SZ SZ_256M
#define STM32_MAX_NORCHIP 2
+#define STM32_QSPI_FIFO_SZ 32
#define STM32_QSPI_FIFO_TIMEOUT_US 30000
#define STM32_QSPI_BUSY_TIMEOUT_US 100000
@@ -124,6 +125,7 @@ struct stm32_qspi_flash {
u32 presc;
u32 read_mode;
bool registered;
+ u32 prefetch_limit;
};
struct stm32_qspi {
@@ -272,6 +274,7 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash,
{
struct stm32_qspi *qspi = flash->qspi;
u32 ccr, dcr, cr;
+ u32 last_byte;
int err;
err = stm32_qspi_wait_nobusy(qspi);
@@ -314,6 +317,10 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash,
if (err)
goto abort;
writel_relaxed(FCR_CTCF, qspi->io_base + QUADSPI_FCR);
+ } else {
+ last_byte = cmd->addr + cmd->len;
+ if (last_byte > flash->prefetch_limit)
+ goto abort;
}
return err;
@@ -322,7 +329,9 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash,
cr = readl_relaxed(qspi->io_base + QUADSPI_CR) | CR_ABORT;
writel_relaxed(cr, qspi->io_base + QUADSPI_CR);
- dev_err(qspi->dev, "%s abort err:%d\n", __func__, err);
+ if (err)
+ dev_err(qspi->dev, "%s abort err:%d\n", __func__, err);
+
return err;
}
@@ -550,6 +559,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi,
}
flash->fsize = FSIZE_VAL(mtd->size);
+ flash->prefetch_limit = mtd->size - STM32_QSPI_FIFO_SZ;
flash->read_mode = CCR_FMODE_MM;
if (mtd->size > qspi->mm_size)
--
2.7.4
next prev parent reply other threads:[~2017-10-26 15:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-26 15:12 [PATCH v2 0/3] mtd: spi-nor: stm32-quadspi: fixes Ludovic Barre
2017-10-26 15:12 ` [PATCH v2 1/3] mtd: spi-nor: stm32-quadspi: Fix uninitialized error return code Ludovic Barre
2017-10-29 17:50 ` Cyrille Pitchen
2017-10-30 8:05 ` Ludovic BARRE
2017-10-26 15:12 ` Ludovic Barre [this message]
2017-10-29 17:57 ` [PATCH v2 2/3] mtd: spi-nor: stm32-quadspi: fix prefetching outside fsize Cyrille Pitchen
2017-10-26 15:12 ` [PATCH v2 3/3] mtd: spi-nor: stm32-quadspi: change license text Ludovic Barre
2017-10-29 17:51 ` Cyrille Pitchen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1509030755-19044-3-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®