From: Bhadram Varka <vbhadram@nvidia.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <peppe.cavallaro@st.com>, <alexandre.torgue@st.com>,
Bhadram Varka <vbhadram@nvidia.com>
Subject: [PATCH net-next] stmmac: copy unicast mac address to MAC registers
Date: Fri, 27 Oct 2017 08:22:02 +0530 [thread overview]
Message-ID: <1509072722-31657-1-git-send-email-vbhadram@nvidia.com> (raw)
Currently stmmac driver not copying the valid ethernet
MAC address to MAC registers. This patch takes care
of updating the MAC register with MAC address.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0e1b0a3..e0e6348 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3748,6 +3748,20 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
return ret;
}
+static int stmmac_set_mac_address(struct net_device *ndev, void *addr)
+{
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret = 0;
+
+ ret = eth_mac_addr(ndev, addr);
+ if (ret)
+ return ret;
+
+ priv->hw->mac->set_umac_addr(priv->hw, ndev->dev_addr, 0);
+
+ return ret;
+}
+
#ifdef CONFIG_DEBUG_FS
static struct dentry *stmmac_fs_dir;
@@ -3975,7 +3989,7 @@ static const struct net_device_ops stmmac_netdev_ops = {
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = stmmac_poll_controller,
#endif
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = stmmac_set_mac_address,
};
/**
--
2.7.4
next reply other threads:[~2017-10-27 2:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-27 2:52 Bhadram Varka [this message]
2017-10-28 10:04 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1509072722-31657-1-git-send-email-vbhadram@nvidia.com \
--to=vbhadram@nvidia.com \
--cc=alexandre.torgue@st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome