From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751263AbdKTOUC (ORCPT ); Mon, 20 Nov 2017 09:20:02 -0500 Received: from mail-wr0-f195.google.com ([209.85.128.195]:43052 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751123AbdKTOUB (ORCPT ); Mon, 20 Nov 2017 09:20:01 -0500 X-Google-Smtp-Source: AGs4zMZuam2jA4Vgs6qkODJS3OnPKzlxStXTwucibRlOkyIu1vm4bhMH6XuLeTsL2OwBPgrF6SDzug== From: Neil Armstrong To: khilman@baylibre.com Cc: Neil Armstrong , linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 0/4] ARM64: dts: meson-gx: fix VPU init for non-vendor u-boot Date: Mon, 20 Nov 2017 15:19:53 +0100 Message-Id: <1511187597-18248-1-git-send-email-narmstrong@baylibre.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On the Amlogic Gx SoCs (GXBB, GXL & GXM), the VPU power domain is initialized by the vendor U-Boot code, but running mainline U-boot has been possible on these SoCs. But lacking such init made the system lock at kernel boot. A PM Power Domain driver has been pushed at [1] to solve the main issue. This patchset depends on the the following patchsets : - [1] soc: amlogic: add support for Meson GX VPU Domains - [2] reset: meson: add level reset support for GX SoC family - [3] clk: meson: gxbb: Add VPU and VAPB clocks Changes since v1 at [4] : - Dropped hdmi-supply in hdmi node until 4.16 - set 5v regulator always-on for now [1] https://lkml.kernel.org/r/1508228167-11753-1-git-send-email-narmstrong@baylibre.com [2] https://lkml.kernel.org/r/1508167573-17396-1-git-send-email-narmstrong@baylibre.com [3] https://lkml.kernel.org/r/1508168085-19032-1-git-send-email-narmstrong@baylibre.com [4] https://lkml.kernel.org/r/1508228951-12384-1-git-send-email-narmstrong@baylibre.com Neil Armstrong (4): ARM64: dts: meson-gx: add VPU power domain ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards ARM64: dts: meson-gx: grow reset controller memory zone ARM64: dts: odroid-c2: Add HDMI and CEC Nodes .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 12 ++++++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 13 ++++++- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 30 +++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 43 ++++++++++++++++++++++ .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 12 ++++++ .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 12 ++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 43 ++++++++++++++++++++++ .../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 12 ++++++ 8 files changed, 176 insertions(+), 1 deletion(-) -- 2.7.4