mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 0/4] ARM: Add Variscite DART-MX6 SoM and Carrier-board support
Date: Tue, 21 Nov 2017 17:28:21 +0100	[thread overview]
Message-ID: <1511281705-30849-1-git-send-email-narmstrong@baylibre.com> (raw)

This patchset adds support for the Variscite DART-MX6 SoM with :
- i.MX6 Quad or Dual Lite SoC
- 1Gb/2Gb LPDDR2
- 4-64 GB eMMC
- Camera Interface
- HDMI+CEC interface
- LVDS / DSI / Parallel RGB interfaces
- Ethernet RGMII interface
- On-SoM Wi-Fi/Bluetooth with WiLink wl1835 SDIO Module
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface
- Digital Audio interface
- S/PDIF interface

And the Carrier-Board with the following :
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display
- HDMI Connector
- USB Host + USB OTG Connector
- 10/100/1000 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- On-board DMIC
- CAN bus header
- SPI header
- Camera Interfaces header
- 4xButtons, 2xLeds
- OnBoard RTC with Coin Backup battery socket
- RS232 Header + USB-Serial debug port

First patch contains a missing pinmux define used by the SoM.
Last patch contains configs used by the SoM DT like SERDEV or WL18XX support.

On-Board DMIC and Camera Interfaces are not handled yet.

Neil Armstrong (4):
  ARM: dts: imx6qdl-pinfunc: Add missing
    MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT
  ARM: dts: imx6qdl: Add Variscite DART-MX6 SoM support
  ARM: dts: imx6q: Add Variscite DART-MX6 Carrier-board support
  ARM: configs: Add missing config for DART-MX6 SoM

 arch/arm/boot/dts/Makefile                     |   1 +
 arch/arm/boot/dts/imx6dl-pinfunc.h             |   1 +
 arch/arm/boot/dts/imx6q-pinfunc.h              |   1 +
 arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 247 ++++++++++++
 arch/arm/boot/dts/imx6qdl-var-dart.dtsi        | 510 +++++++++++++++++++++++++
 arch/arm/configs/imx_v6_v7_defconfig           |   6 +
 6 files changed, 766 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-var-dt6customboard.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-var-dart.dtsi

-- 
2.7.4

             reply	other threads:[~2017-11-21 16:28 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-21 16:28 Neil Armstrong [this message]
2017-11-21 16:28 ` [PATCH 1/4] ARM: dts: imx6qdl-pinfunc: Add missing MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT Neil Armstrong
2017-11-21 16:59   ` Fabio Estevam
2017-11-21 16:28 ` [PATCH 2/4] ARM: dts: imx6qdl: Add Variscite DART-MX6 SoM support Neil Armstrong
2017-11-21 16:54   ` Fabio Estevam
2017-11-22  9:14     ` Neil Armstrong
2017-11-21 16:28 ` [PATCH 3/4] ARM: dts: imx6q: Add Variscite DART-MX6 Carrier-board support Neil Armstrong
2017-11-21 16:45   ` Fabio Estevam
2017-11-22 10:51     ` Neil Armstrong
2017-11-21 16:28 ` [PATCH 4/4] ARM: configs: Add missing config for DART-MX6 SoM Neil Armstrong
2017-11-21 16:54   ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1511281705-30849-1-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®